[PATCH 0/5] Add support for the Kosagi Novena board

[John Watts]

This patch series introduces support for the Novena board.
This support is basic but enough to boot Barebox.

The last patch requires my previous patch series here:
https://lists.infradead.org/pipermail/barebox/2023-January/041270.html

John Watts (5):
  ARM: novena: Add Kosagi Novena board
  ARM: novena: Setup RAM using static configuration
  ARM: novena: Require the PFUZE regulator
  ARM: novena: Read Ethernet MAC address from EEPROM
  ARM: novena: Use DDR3 information from SPD EEPROM

 arch/arm/boards/Makefile                      |   1 +
 arch/arm/boards/novena/Makefile               |   4 +
 arch/arm/boards/novena/board.c                |  81 ++++++++
 arch/arm/boards/novena/ddr_regs.h             | 119 +++++++++++
 .../boards/novena/flash-header-novena.imxcfg  |   6 +
 arch/arm/boards/novena/lowlevel.c             | 195 ++++++++++++++++++
 arch/arm/configs/imx_v7_defconfig             |   1 +
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/imx6q-novena.dts                 |  19 ++
 arch/arm/mach-imx/Kconfig                     |   9 +
 images/Makefile.imx                           |   2 +
 11 files changed, 438 insertions(+)
 create mode 100644 arch/arm/boards/novena/Makefile
 create mode 100644 arch/arm/boards/novena/board.c
 create mode 100644 arch/arm/boards/novena/ddr_regs.h
 create mode 100644 arch/arm/boards/novena/flash-header-novena.imxcfg
 create mode 100644 arch/arm/boards/novena/lowlevel.c
 create mode 100644 arch/arm/dts/imx6q-novena.dts

-- 
2.39.0