[PATCH v3 1/4] ARM: novena: Add Kosagi Novena board
Marco Felsch
m.felsch at pengutronix.de
Mon Jan 30 12:13:08 PST 2023
Hi John,
thanks for the patch.
On 23-01-30, John Watts wrote:
> The Kosagi Novena is an open source laptop released in 2014.
>
> This patch adds the initial project skeleton for running the PBL
> and debugging over the UART2 port (labeled DEBUG on the board.)
>
> Signed-off-by: John Watts <contact at jookia.org>
> ---
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/novena/Makefile | 4 ++
> arch/arm/boards/novena/board.c | 24 +++++++
> .../boards/novena/flash-header-novena.imxcfg | 6 ++
> arch/arm/boards/novena/lowlevel.c | 65 +++++++++++++++++++
> arch/arm/configs/imx_v7_defconfig | 1 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx6q-novena.dts | 4 ++
> arch/arm/mach-imx/Kconfig | 6 ++
> images/Makefile.imx | 2 +
> 10 files changed, 114 insertions(+)
> create mode 100644 arch/arm/boards/novena/Makefile
> create mode 100644 arch/arm/boards/novena/board.c
> create mode 100644 arch/arm/boards/novena/flash-header-novena.imxcfg
> create mode 100644 arch/arm/boards/novena/lowlevel.c
> create mode 100644 arch/arm/dts/imx6q-novena.dts
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index f47aea6602..50088886eb 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_MACH_BEAGLEBONE) += beaglebone/
> obj-$(CONFIG_MACH_CANON_A1100) += canon-a1100/
> obj-$(CONFIG_MACH_CM_FX6) += cm-fx6/
> obj-$(CONFIG_MACH_NITROGEN6) += boundarydevices-nitrogen6/
> +obj-$(CONFIG_MACH_NOVENA) += novena/
> obj-$(CONFIG_MACH_CCMX51) += ccxmx51/
> obj-$(CONFIG_MACH_CCMX53) += ccxmx53/
> obj-$(CONFIG_MACH_CFA10036) += crystalfontz-cfa10036/
> diff --git a/arch/arm/boards/novena/Makefile b/arch/arm/boards/novena/Makefile
> new file mode 100644
> index 0000000000..3111392bf9
> --- /dev/null
> +++ b/arch/arm/boards/novena/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +obj-y += board.o
> +lwl-y += lowlevel.o
> diff --git a/arch/arm/boards/novena/board.c b/arch/arm/boards/novena/board.c
> new file mode 100644
> index 0000000000..e41ea10f8d
> --- /dev/null
> +++ b/arch/arm/boards/novena/board.c
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// SPDX-FileCopyrightText: 2023 John Watts <contact at jookia.org>
> +
> +#include <common.h>
> +#include <deep-probe.h>
> +
> +static int novena_probe(struct device *dev)
> +{
> + return 0;
> +}
> +
> +static const struct of_device_id novena_of_match[] = {
> + { .compatible = "kosagi,imx6q-novena", },
> + { /* sentinel */ }
> +};
> +
> +static struct driver novena_board_driver = {
> + .name = "board-novena",
> + .probe = novena_probe,
> + .of_compatible = novena_of_match,
> +};
> +coredevice_platform_driver(novena_board_driver);
> +
> +BAREBOX_DEEP_PROBE_ENABLE(novena_of_match);
> diff --git a/arch/arm/boards/novena/flash-header-novena.imxcfg b/arch/arm/boards/novena/flash-header-novena.imxcfg
> new file mode 100644
> index 0000000000..0612542c19
> --- /dev/null
> +++ b/arch/arm/boards/novena/flash-header-novena.imxcfg
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +loadaddr 0x00907000
> +soc imx6
> +max_load_size 0x11000
> +ivtofs 0x400
> diff --git a/arch/arm/boards/novena/lowlevel.c b/arch/arm/boards/novena/lowlevel.c
> new file mode 100644
> index 0000000000..58b925c311
> --- /dev/null
> +++ b/arch/arm/boards/novena/lowlevel.c
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// SPDX-FileCopyrightText: 2023 John Watts <contact at jookia.org>
> +
> +#include <asm/barebox-arm.h>
> +#include <common.h>
> +#include <debug_ll.h>
> +#include <mach/esdctl.h>
> +#include <mach/generic.h>
> +#include <mach/imx6.h>
> +#include <mach/iomux-mx6.h>
> +#include <mach/xload.h>
> +#include <soc/fsl/fsl_udc.h>
> +
> +#define STACK_TOP (MX6_OCRAM_BASE_ADDR + MX6_OCRAM_MAX_SIZE)
> +
> +extern char __dtb_imx6q_novena_start[];
Can we use compressed device-tree's instead? For this feature you only
need to rename this variable to: __dtb_z_imx6q_novena_start[] and select
'ARM_USE_COMPRESSED_DTB' within the Kconfig.
An example can be found here:
- arch/arm/boards/zii-imx6q-rdu2/lowlevel.c
- arch/arm/mach-imx/Kconfig
Sorry for not recognize it the first time.
> +
> +static bool running_from_ram(void)
> +{
> + return (get_pc() >= MX6_MMDC_PORT01_BASE_ADDR);
> +}
> +
> +static void setup_uart(void)
> +{
> + /* NOTE: RX is needed for TX to work on this board */
> + imx_setup_pad(IOMEM(MX6_IOMUXC_BASE_ADDR), MX6Q_PAD_EIM_D26__UART2_RXD);
> + imx_setup_pad(IOMEM(MX6_IOMUXC_BASE_ADDR), MX6Q_PAD_EIM_D27__UART2_TXD);
> +
> + imx6_uart_setup(IOMEM(MX6_UART2_BASE_ADDR));
> + pbl_set_putc(imx_uart_putc, IOMEM(MX6_UART2_BASE_ADDR));
> +
> + pr_debug(">");
> +}
> +
> +static void load_barebox(void)
> +{
> + enum bootsource bootsrc;
> + int bootinstance;
> +
> + imx6_get_boot_source(&bootsrc, &bootinstance);
> +
> + if (bootsrc == BOOTSOURCE_SERIAL)
> + imx6_barebox_start_usb(IOMEM(MX6_MMDC_PORT01_BASE_ADDR));
> + else if (bootsrc == BOOTSOURCE_MMC)
> + imx6_esdhc_start_image(bootinstance);
> +
> + pr_err("Unsupported boot source %i instance %i\n",
> + bootsrc, bootinstance);
Nit: Please align it correctly.
Regards,
Marco
> + hang();
> +}
> +
> +ENTRY_FUNCTION_WITHSTACK(start_imx6q_novena, STACK_TOP, r0, r1, r2)
> +{
> + imx6_cpu_lowlevel_init();
> + relocate_to_current_adr();
> + setup_c();
> +
> + imx6_ungate_all_peripherals();
> + setup_uart();
> +
> + if (!running_from_ram())
> + load_barebox();
> + else
> + imx6q_barebox_entry(__dtb_imx6q_novena_start);
> +}
> diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig
> index 6110a52e48..f8deca324a 100644
> --- a/arch/arm/configs/imx_v7_defconfig
> +++ b/arch/arm/configs/imx_v7_defconfig
> @@ -25,6 +25,7 @@ CONFIG_MACH_SABRELITE=y
> CONFIG_MACH_SABRESD=y
> CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB=y
> CONFIG_MACH_NITROGEN6=y
> +CONFIG_MACH_NOVENA=y
> CONFIG_MACH_SOLIDRUN_MICROSOM=y
> CONFIG_MACH_TECHNEXION_PICO_HOBBIT=y
> CONFIG_MACH_TECHNEXION_WANDBOARD=y
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 26c4a8ab99..a01ee19f68 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -46,6 +46,7 @@ lwl-$(CONFIG_MACH_MYIRTECH_X335X) += am335x-myirtech-myd.dtb.o
> lwl-$(CONFIG_MACH_NETGEAR_RN104) += armada-370-rn104-bb.dtb.o
> lwl-$(CONFIG_MACH_NETGEAR_RN2120) += armada-xp-rn2120-bb.dtb.o
> lwl-$(CONFIG_MACH_NITROGEN6) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o imx6qp-nitrogen6_max.dtb.o
> +lwl-$(CONFIG_MACH_NOVENA) += imx6q-novena.dtb.o
> lwl-$(CONFIG_MACH_NVIDIA_BEAVER) += tegra30-beaver.dtb.o
> lwl-$(CONFIG_MACH_NVIDIA_JETSON) += tegra124-jetson-tk1.dtb.o
> lwl-$(CONFIG_MACH_PCA100) += imx27-phytec-phycard-s-rdk-bb.dtb.o
> diff --git a/arch/arm/dts/imx6q-novena.dts b/arch/arm/dts/imx6q-novena.dts
> new file mode 100644
> index 0000000000..12bade849c
> --- /dev/null
> +++ b/arch/arm/dts/imx6q-novena.dts
> @@ -0,0 +1,4 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR X11
> +// SPDX-FileCopyrightText: 2023 John Watts <contact at jookia.org>
> +
> +#include <arm/imx6q-novena.dts>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 774c4cacb7..7993835be7 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -434,6 +434,12 @@ config MACH_NITROGEN6
> bool "BoundaryDevices Nitrogen6 boards"
> select ARCH_IMX6
>
> +config MACH_NOVENA
> + bool "Kosagi Novena board"
> + select ARCH_IMX6
> + select MCI_IMX_ESDHC_PBL
> + select USB_GADGET_DRIVER_ARC_PBL
> +
> config MACH_SOLIDRUN_MICROSOM
> bool "SolidRun MicroSOM based devices"
> select ARCH_IMX6
> diff --git a/images/Makefile.imx b/images/Makefile.imx
> index e9f4ba64e4..65914212bf 100644
> --- a/images/Makefile.imx
> +++ b/images/Makefile.imx
> @@ -258,6 +258,8 @@ $(call build_imx_habv4img, CONFIG_MACH_NITROGEN6, start_imx6dl_nitrogen6x_2g, bo
>
> $(call build_imx_habv4img, CONFIG_MACH_NITROGEN6, start_imx6qp_nitrogen6_max, boundarydevices-nitrogen6/flash-header-nitrogen6qp-max, boundarydevices-imx6qp-nitrogen6_max)
>
> +$(call build_imx_habv4img, CONFIG_MACH_NOVENA, start_imx6q_novena, novena/flash-header-novena, imx6q-novena)
> +
> $(call build_imx_habv4img, CONFIG_MACH_TX6X, start_imx6dl_tx6x_512m, karo-tx6x/flash-header-tx6dl-512m, karo-imx6dl-tx6x-512m)
>
> $(call build_imx_habv4img, CONFIG_MACH_TX6X, start_imx6dl_tx6x_1g, karo-tx6x/flash-header-tx6dl-1g, karo-imx6dl-tx6x-1g)
> --
> 2.39.1
>
>
>
More information about the barebox
mailing list