[PATCH v2] ARM: i.MX6: Specify OCRAM base address and size

Sascha Hauer sha at pengutronix.de
Mon Jan 30 00:08:01 PST 2023


On Fri, Jan 27, 2023 at 07:56:42PM +1100, John Watts wrote:
> On Fri, Jan 27, 2023 at 09:06:33AM +0100, Marco Felsch wrote:
> > Hi John,
> > 
> > On 23-01-27, John Watts wrote:
> > > The i.MX6 includes some on-chip RAM: 128KiB on most variants, with 256KiB on
> > > the Dual and Quad variants.
> > > 
> > > This region is where the first stage of Barebox gets loaded if RAM
> > > initialization isn't hard coded using DCD information.
> > > 
> > > Add the base address and size so it can be used to calculate where to put the
> > > stack at boot.
> > > 
> > > Signed-off-by: John Watts <contact at jookia.org>
> > 
> > Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
> 
> Do I add that to a V3? :)

No. I collect the Reviewed-by tags while applying. Or better, git b4
does this automatically for me ;)

> Should I add the review stuff to my Novena patches too?

Usually when sending a new series you add the tags you got from the
previous one, but just adding tags is not a reason for resending.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list