[PATCH v2] ARM: i.MX6: Specify OCRAM base address and size

[John Watts]

On Fri, Jan 27, 2023 at 09:06:33AM +0100, Marco Felsch wrote:
> Hi John,
> 
> On 23-01-27, John Watts wrote:
> > The i.MX6 includes some on-chip RAM: 128KiB on most variants, with 256KiB on
> > the Dual and Quad variants.
> > 
> > This region is where the first stage of Barebox gets loaded if RAM
> > initialization isn't hard coded using DCD information.
> > 
> > Add the base address and size so it can be used to calculate where to put the
> > stack at boot.
> > 
> > Signed-off-by: John Watts <contact at jookia.org>
> 
> Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>

Do I add that to a V3? :)
Should I add the review stuff to my Novena patches too?

John.