February 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 1 03:20:36 EST 2012
Ending: Wed Feb 29 23:40:47 EST 2012
Messages: 312

• [PATCH] Add pwm core support   Robert Jarzmik
• [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Premi, Sanjeev
  • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Belisko Marek
    • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Premi, Sanjeev
      • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Belisko Marek
      • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Premi, Sanjeev
      • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Sascha Hauer
      • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Premi, Sanjeev
      • [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.   Belisko Marek
• [PATCH] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
  • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Sascha Hauer
    • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Sascha Hauer
      • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Sascha Hauer
      • [PATCH] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller   Sascha Hauer
      • [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH V2 1/2] drivers/pwm: add PXA pulse width modulator controller   Sascha Hauer
      • [PATCH V3 1/3] drivers/pwm: add duty_ns and period_ns to core pwm chip   Robert Jarzmik
      • [PATCH V3 2/3] drivers/pwm: add PXA pulse width modulator controller   Robert Jarzmik
      • [PATCH V3 3/3] drivers/video: remove pxafb enable on load   Robert Jarzmik
      • [PATCH V2 2/2] drivers/video: remove pxafb enable on load   Robert Jarzmik
• linking error x86 barebox   Erwin Rol
  • linking error x86 barebox   Erwin Rol
• how do i add the defn for the beagle xM to barebox?   Robert P. J. Day
  • how do i add the defn for the beagle xM to barebox?   Eric Bénard
    • how do i add the defn for the beagle xM to barebox?   Robert P. J. Day
    • how do i add the defn for the beagle xM to barebox?   Robert P. J. Day
      • how do i add the defn for the beagle xM to barebox?   Eric Bénard
      • how do i add the defn for the beagle xM to barebox?   Robert P. J. Day
      • how do i add the defn for the beagle xM to barebox?   Eric Bénard
      • how do i add the defn for the beagle xM to barebox?   Robert P. J. Day
      • how do i add the defn for the beagle xM to barebox?   Eric Bénard
      • how do i add the defn for the beagle xM to barebox?   Sascha Hauer
      • how do i add the defn for the beagle xM to barebox?   Robert P. J. Day
• [PATCH] Typo fix in Kconfig file: "Invlidate" -> "Invalidate"   Robert P. J. Day
• v2012.02.0   Sascha Hauer
• any value in allowing user selection of barebox prompt?   Robert P. J. Day
  • any value in allowing user selection of barebox prompt?   Sascha Hauer
    • any value in allowing user selection of barebox prompt?   Robert P. J. Day
      • any value in allowing user selection of barebox prompt?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] DOC: Grammar and typo fixes in first_steps.dox.   Robert P. J. Day
• [PATCH] DOC: Some grammar and spelling fixes for barebox-main.dox.   Robert P. J. Day
• [PATCH] Add ARCH_OMAP[34] dependencies to Kconfig file   Robert P. J. Day
• what is the purpose of config option HAS_OMAP_NAND?   Robert P. J. Day
  • what is the purpose of config option HAS_OMAP_NAND?   Sascha Hauer
    • what is the purpose of config option HAS_OMAP_NAND?   Robert P. J. Day
• [PATCH] Remove apparently superfluous Kconfig variable HAS_OMAP_NAND   Robert P. J. Day
  • [PATCH] Remove apparently superfluous Kconfig variable HAS_OMAP_NAND#   Sascha Hauer
• "make distclean" doesn't remove generated MLO file   Robert P. J. Day
  • "make distclean" doesn't remove generated MLO file   Premi, Sanjeev
    • "make distclean" doesn't remove generated MLO file   Robert P. J. Day
      • "make distclean" doesn't remove generated MLO file   Premi, Sanjeev
      • "make distclean" doesn't remove generated MLO file   Robert P. J. Day
      • "make distclean" doesn't remove generated MLO file   Premi, Sanjeev
      • "make distclean" doesn't remove generated MLO file   Robert P. J. Day
      • "make distclean" doesn't remove generated MLO file   Premi, Sanjeev
      • "make distclean" doesn't remove generated MLO file   Sascha Hauer
• [PATCH] Fix Mac OS cross compile failed.   Keith Mok
  • [PATCH] Fix Mac OS cross compile failed.   Sascha Hauer
    • [PATCH v2] Fix Mac OS cross compile failed.   Keith Mok
• [PATCH 0/2] omap3evm: Enable Linux boot   Sanjeev Premi
  • [PATCH 1/2] omap3evm: Remove inclusion of non-existent header   Sanjeev Premi
  • [PATCH 2/2] omap3evm: Setup ATAGs for Linux boot   Sanjeev Premi
  • [PATCH 0/2] omap3evm: Enable Linux boot   Premi, Sanjeev
  • [PATCH 0/2] omap3evm: Enable Linux boot   Sascha Hauer
• [RFC] Select CMD_LOADENV with DEFAULT_ENVIRONMENT   Sanjeev Premi
  • [RFC] Select CMD_LOADENV with DEFAULT_ENVIRONMENT   Sascha Hauer
• An observation with omap_xload   Premi, Sanjeev
  • An observation with omap_xload   Sascha Hauer
• why would beagle and panda boards not have CONFIG_MCI_STARTUP set?   Robert P. J. Day
  • why would beagle and panda boards not have CONFIG_MCI_STARTUP set?   Sascha Hauer
• for which OMAP platform is MCI_OMAP_HSMMC appropriate?   Robert P. J. Day
  • for which OMAP platform is MCI_OMAP_HSMMC appropriate?   Sascha Hauer
    • for which OMAP platform is MCI_OMAP_HSMMC appropriate?   Robert P. J. Day
      • for which OMAP platform is MCI_OMAP_HSMMC appropriate?   Sascha Hauer
      • for which OMAP platform is MCI_OMAP_HSMMC appropriate?   Robert P. J. Day
• [PATCH] Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3.   Robert P. J. Day
  • [PATCH] Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3.   Sascha Hauer
• [PATCH] Add CONFIG_MCI_STARTUP=y to BeagleBoard defconfig.   Robert P. J. Day
  • [PATCH] Add CONFIG_MCI_STARTUP=y to BeagleBoard defconfig.   Sascha Hauer
• need some clarification on how environments work   Robert P. J. Day
  • need some clarification on how environments work   Premi, Sanjeev
    • need some clarification on how environments work   Sascha Hauer
      • need some clarification on how environments work   Robert P. J. Day
      • need some clarification on how environments work   Sascha Hauer
• freescale imx28 barebox supported?   christian.buettner at rafi.de
  • freescale imx28 barebox supported?   Sascha Hauer
• should all SD-bootable boards have CONFIG_MCI_WRITE enabled?   Robert P. J. Day
• flash image through CAN   christian.buettner at rafi.de
  • flash image through CAN   Marc Kleine-Budde
    • Antwort: Re: flash image through CAN   christian.buettner at rafi.de
      • Antwort: Re: flash image through CAN   Marc Kleine-Budde
      • Antwort: Re: flash image through CAN   Robert Schwebel
• "panda" config and build doesn't work on panda ES at all   Robert P. J. Day
  • "panda" config and build doesn't work on panda ES at all   Sascha Hauer
    • "panda" config and build doesn't work on panda ES at all   Robert P. J. Day
  • "panda" config and build doesn't work on panda ES at all   Eric Bénard
    • "panda" config and build doesn't work on panda ES at all   Robert P. J. Day
• any thoughts on CONFIG_MCI_WRITE for beagles and pandas?   Robert P. J. Day
• my wiki page for barebox on the beagle or panda   Robert P. J. Day
  • my wiki page for barebox on the beagle or panda   Belisko Marek
    • my wiki page for barebox on the beagle or panda   Robert P. J. Day
• [PATCH] mmc/sd patches   Sascha Hauer
  • [PATCH 05/15] mci core: replace discrete ios values with struct ios   Sascha Hauer
  • [PATCH 08/15] mci s3c: pass around the right pointer   Sascha Hauer
  • [PATCH 09/15] mci: remove unused device argument from set_ios   Sascha Hauer
  • [PATCH 10/15] mci core: fix mixup of max write/read block len   Sascha Hauer
  • [PATCH 11/15] mci: Use struct mci for internal argument passing   Sascha Hauer
  • [PATCH 12/15] mci: replace pr_debug with dev_dbg   Sascha Hauer
  • [PATCH 13/15] mci: factor out mci/sd specific startup functions   Sascha Hauer
  • [PATCH 14/15] mci: cdev_find_free_index won't fail, no need to check   Sascha Hauer
  • [PATCH 15/15] mci: Be more verbose on what device is associated to which disk   Sascha Hauer
    • [PATCH 15/15] mci: Be more verbose on what device is associated to which disk   Sascha Hauer
• [PATCH 01/15] mci: Add complete definitions for the card type   Sascha Hauer
• [PATCH 02/15] mci: use card type definitions   Sascha Hauer
• [PATCH 03/15] mci: fix high capacity detection   Sascha Hauer
• [PATCH 04/15] mci mxs: do not use external define for internal use   Sascha Hauer
• [PATCH 06/15] mci s3c: Do not mess with struct mci_host   Sascha Hauer
• [PATCH 07/15] mci s3c: allocate host struct dynamically   Sascha Hauer
• what config setting causes barebox to automount the boot partition?   Robert P. J. Day
  • what config setting causes barebox to automount the boot partition?   Eric Bénard
    • what config setting causes barebox to automount the boot partition?   Robert P. J. Day
• [PATCH] Add support for default env and mounting /boot to BeagleBoard   Robert P. J. Day
  • [PATCH] Add support for default env and mounting /boot to BeagleBoard   Premi, Sanjeev
    • [PATCH] Add support for default env and mounting /boot to BeagleBoard   Robert P. J. Day
• [PATCH] more mci related stuff   Sascha Hauer
  • [PATCH 2/5] mci i.MX esdhc: use timeout loops   Sascha Hauer
• [PATCH 1/5] Add a timeout polling loop convenience wrapper   Sascha Hauer
• [PATCH 3/5] mci: Add a complete list of EXT_CSD_* fields from the kernel   Sascha Hauer
• [PATCH 4/5] mci: Fix 8 bit mmc cards   Sascha Hauer
• [PATCH 5/5] mci i.MX esdhc: make 8bit modes platform dependent   Sascha Hauer
• oh, crap, never mind that last patch   Robert P. J. Day
• [PATCH 2/5] defaultenv/boot: add getopt option support to select boot mode   Jean-Christophe PLAGNIOL-VILLARD
• how to read GPIO values from command line?   Robert P. J. Day
  • how to read GPIO values from command line?   Eric Bénard
    • how to read GPIO values from command line?   Robert P. J. Day
    • how to read GPIO values from command line?   Robert P. J. Day
      • how to read GPIO values from command line?   Eric Bénard
      • how to read GPIO values from command line?   Robert P. J. Day
  • how to read GPIO values from command line?   Sascha Hauer
• [RFC] omap3evm: Set preliminary environment   Sanjeev Premi
  • [RFC] omap3evm: Set preliminary environment   Sascha Hauer
    • [RFC] omap3evm: Set preliminary environment   Premi, Sanjeev
      • [RFC] omap3evm: Set preliminary environment   Sascha Hauer
• [PATCH] omap: xload: Make error more specific   Sanjeev Premi
  • [PATCH] omap: xload: Make error more specific   Sascha Hauer
• a question about adding panda ES support before i get rolling   Robert P. J. Day
  • a question about adding panda ES support before i get rolling   Sascha Hauer
• [PATCH] Add comment explaining what cortex_a9_rev() is doing.   Robert P. J. Day
• working on extending board identification right now   Robert P. J. Day
• what is the earliest i can get MLO to print out debugging info?   Robert P. J. Day
  • what is the earliest i can get MLO to print out debugging info?   Sascha Hauer
• IIM on iMX27 "how-to" needed   Igor Trevisan
  • IIM on iMX27 "how-to" needed   Sascha Hauer
    • IIM on iMX27 "how-to" needed   Igor Trevisan
• [RFC] A first pass at recognizing Pandaboards   Robert P. J. Day
  • [RFC] A first pass at recognizing Pandaboards   Sascha Hauer
    • [RFC] A first pass at recognizing Pandaboards   Robert P. J. Day
• [PATCH] Extend OMAP code to recognize PandaBoard ES   Robert P. J. Day
• [PATCH] Add support for OMAP4460 revision detection.   Robert P. J. Day
• [PATCH] uImage/bootm fixes   Sascha Hauer
  • [PATCH 1/2] ARM: Fix oftree booting   Sascha Hauer
  • [PATCH 2/2] uimage: Fix error message   Sascha Hauer
• LPC3250 support   Tomislav Sečen
  • LPC3250 support   Vladimir Zapolskiy
    • LPC3250 support   Sascha Hauer
      • LPC3250 support   Tomislav Sečen
    • LPC3250 support   Tomislav Sečen
• [PATCH v2] omap: xload: Make error more specific   Sanjeev Premi
  • [PATCH v2] omap: xload: Make error more specific   Sascha Hauer
• [PATCH] Add TQ tqma53 support   Sascha Hauer
  • [PATCH 1/3] ARM: update mach-types   Sascha Hauer
  • [PATCH 2/3] ARM i.MX5: Allow to pass cpu clock to lowlevel init   Sascha Hauer
  • [PATCH 3/3] initial tqm53 support   Sascha Hauer
• [PATCH 1/4] add gpio keyboard support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/4] at91: at91_register_uart return device   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/4] usb-a926x: add DAB MMX Daughter board support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/4] add gpio keyboard support   Sascha Hauer
    • [PATCH 1/4] add gpio keyboard support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/4] add gpio keyboard support   Sascha Hauer
  • [PATCH 1/4 v2] add gpio keyboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] readkey: add define for Ascii keys   Jean-Christophe PLAGNIOL-VILLARD
• iMX27 clock settings   Igor Trevisan
  • iMX27 clock settings   Kamel BOUHARA
    • iMX27 clock settings   Igor Trevisan
  • iMX27 clock settings   Juergen Beisert
  • iMX27 clock settings   Sascha Hauer
    • iMX27 clock settings   Igor Trevisan
      • iMX27 clock settings   Igor Trevisan
• USB/network unregistration patches   Sascha Hauer
  • [PATCH 1/6] usb net smsc95xx: remove unused variable   Sascha Hauer
  • [PATCH 2/6] usb net smsc95xx: add missing mii_unregister   Sascha Hauer
  • [PATCH 3/6] usb net: fix unregistration   Sascha Hauer
  • [PATCH 4/6] net: fix eth device unregistration   Sascha Hauer
  • [PATCH 5/6] net: set enetaddr to invalid address when an invalid string is passed   Sascha Hauer
  • [PATCH 6/6] USB storage: fix disconnect   Sascha Hauer
• Fix FAT block caching   Sascha Hauer
  • [PATCH 1/3] list: add list_last_entry function   Sascha Hauer
  • [PATCH 2/3] fat: revert fat caching mechanism   Sascha Hauer
  • [PATCH 3/3] block: reimplement caching   Sascha Hauer
• cleanup filesystem core   Sascha Hauer
  • [PATCH 01/12] add list_is_singular   Sascha Hauer
  • [PATCH 02/12] dos partitions: Do not register as fixed partitions   Sascha Hauer
  • [PATCH 03/12] fs: Store mtab entries in list   Sascha Hauer
  • [PATCH 04/12] fs: make locally used function get_mtab_entry_by_path static   Sascha Hauer
  • [PATCH 05/12] fs: Store mtab path in allocated string   Sascha Hauer
  • [PATCH 06/12] fs: remove unused function fsdev_get_mountpoint   Sascha Hauer
  • [PATCH 07/12] fs: simplify get_mtab_entry_by_path   Sascha Hauer
  • [PATCH 08/12] fs: remove only once used variable   Sascha Hauer
  • [PATCH 09/12] fs: remove fs devices list   Sascha Hauer
  • [PATCH 10/12] fs: put fs devices on its own bus   Sascha Hauer
  • [PATCH 11/12] fs: allow to mount on subdirectories   Sascha Hauer
  • [PATCH 12/12] devices: unregister children when unregistering a device   Sascha Hauer
• [PULL] gpio_keys   Jean-Christophe PLAGNIOL-VILLARD
• tftp filesystem support   Sascha Hauer
  • [PATCH 1/5] Add suport for tftp as a filesystem   Sascha Hauer
    • [PATCH 1/5] Add suport for tftp as a filesystem   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/5] Add suport for tftp as a filesystem   Sascha Hauer
  • [PATCH 2/5] make uimages work on tftpfs   Sascha Hauer
  • [PATCH 3/5] net: let net_udp_get_payload return void *   Sascha Hauer
  • [PATCH 4/5] add string for -ETIMEDOUT   Sascha Hauer
  • [PATCH 5/5] copy_file: limit progress bar to sensible limits   Sascha Hauer
• [PATCH 1/7] add i2c clock support   Eric Bénard
  • [PATCH 2/7] mfd: add mc34708 driver   Eric Bénard
    • [PATCH 2/7] mfd: add mc34708 driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/7] mfd: add mc34708 driver   Eric Bénard
      • [PATCH 2/7] mfd: add mc34708 driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/7] mfd: add mc34708 driver   Eric Bénard
      • [PATCH 2/7] mfd: add mc34708 driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/7] mfd: add mc34708 driver   Eric Bénard
      • [PATCH 2/7] mfd: add mc34708 driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/7] mfd: add mc34708 driver   Sascha Hauer
      • [PATCH 2/7] mfd: add mc34708 driver   Marc Reilly
  • [PATCH 3/7] i.MX53: add silicn revision functions   Eric Bénard
    • [PATCH 3/7] i.MX53: add silicn revision functions   Sascha Hauer
      • [PATCH v2 1/7] add i2c clock support   Eric Bénard
      • [PATCH v2 2/7] mfd: add mc34708 driver   Eric Bénard
      • [PATCH v2 3/7] i.MX53: add silicon revision functions   Eric Bénard
      • [PATCH v2 4/7] i.MX53: enable pull up on I2C0 pins   Eric Bénard
      • [PATCH v2 5/7] mx53-loco: add i2c support   Eric Bénard
      • [PATCH v2 6/7] mx53-loco: add board revision support   Eric Bénard
      • [PATCH v2 6/7] mx53-loco: add board revision support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 6/7] mx53-loco: add board revision support   Sascha Hauer
      • [PATCH v2 7/7] mx53-loco: update defconfig   Eric Bénard
      • [PATCH v2 1/7] add i2c clock support   Sascha Hauer
  • [PATCH 4/7] i.MX53: enable pull up on I2C0 pins   Eric Bénard
  • [PATCH 5/7] mx53-loco: add i2c support   Eric Bénard
  • [PATCH 6/7] mx53-loco: add board revision support   Eric Bénard
    • [PATCH 6/7] mx53-loco: add board revision support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/7] mx53-loco: update defconfig   Eric Bénard
• Pending patches   Robert Jarzmik
  • Pending patches   Sascha Hauer
• mx53 loco boot procedure   George Stefan
  • mx53 loco boot procedure   Eric Bénard
  • mx53 loco boot procedure   Sascha Hauer
    • mx53 loco boot procedure   George Stefan
      • mx53 loco boot procedure   Sascha Hauer
      • mx53 loco boot procedure   George Stefan
      • mx53 loco boot procedure   Eric Bénard
• PATCH: Fix MMC boot in OMAP4 xload configurations   Mark Olleson
  • PATCH: Fix MMC boot in OMAP4 xload configurations   Sascha Hauer
    • PATCH: Fix MMC boot in OMAP4 xload configurations   Jean-Christophe PLAGNIOL-VILLARD
      • PATCH: Fix MMC boot in OMAP4 xload configurations   Sascha Hauer
  • PATCH: Fix MMC boot in OMAP4 xload configurations   Mark Olleson
    • Fwd: PATCH: Fix MMC boot in OMAP4 xload configurations   Mark Olleson
• get rid of most type_data usage   Sascha Hauer
  • [PATCH 01/13] fs: get fs driver using container_of   Sascha Hauer
  • [PATCH 02/13] fs: get fs device using container_of   Sascha Hauer
  • [PATCH 04/13] serial drivers: remove unused type_data   Sascha Hauer
  • [PATCH 05/13] serial pxa: fix unregister   Sascha Hauer
  • [PATCH 06/13] serial imx: fix unregister   Sascha Hauer
  • [PATCH 08/13] serial s3c: add a driver private struct   Sascha Hauer
  • [PATCH 09/13] net: use container_of instead of dev->type_data   Sascha Hauer
  • [PATCH 10/13] net drivers: remove unused type_data   Sascha Hauer
  • [PATCH 11/13] net fec_imx: drop type_data usage   Sascha Hauer
  • [PATCH 12/13] net fec_mpc5200: drop type_data usage   Sascha Hauer
• [PATCH 03/13] console: use container_of instead of type_data   Sascha Hauer
• [PATCH 07/13] serial stm: fix unregister   Sascha Hauer
• [PATCH 13/13] driver: remove unused type_data field from struct driver_d   Sascha Hauer
• [PATCH] cp: fix memory leak   Sascha Hauer
• [PATCH 1/2] getopt: turn commented out printf into debug()   Sascha Hauer
• [PATCH 2/2] getopt: save and restore context   Sascha Hauer
• [PATCH] Typo fix in pm9261 init file   Asen Chavdarov Dimov
  • [PATCH] Typo fix in pm9261 init file   Sascha Hauer
• [PATCH] Add unaligned.h to sandbox arch   Lars Poeschel
  • [PATCH] Add unaligned.h to sandbox arch   Sascha Hauer
• [PATCH] lib: remove unused bcopy function   Sascha Hauer
• [PATCH] some binary space reduction   Sascha Hauer
  • [PATCH 2/3] ARM boot[zu]: return COMMAND_ERROR_USAGE instead of calling barebox_cmd_usage   Sascha Hauer
  • [PATCH 3/3] commands: remove struct command pointer from commands   Sascha Hauer
• [PATCH 1/3] command: do not allow abbreviated commands anymore   Sascha Hauer
• [PATCH] drivers/mci: fix read/write stalling   Robert Jarzmik
  • [PATCH] drivers/mci: fix read/write stalling   Sascha Hauer
    • [PATCH] drivers/mci: fix read/write stalling   Robert Jarzmik
  • [PATCH] drivers/mci: fix read/write stalling   Sascha Hauer
• [PATCH] Thumb2 support   Sascha Hauer
  • [PATCH 1/3] ARM: move exception vectors away from start of binary   Sascha Hauer
  • [PATCH 2/3] ARM: get runtime offset of board_init_lowlevel_return by using separate section   Sascha Hauer
    • [PATCH 2/3] ARM: get runtime offset of board_init_lowlevel_return by using separate section   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/3] ARM: Allow to compile in thumb-2 mode   Sascha Hauer
    • [PATCH 3/3] ARM: Allow to compile in thumb-2 mode   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 3/3] ARM: Allow to compile in thumb-2 mode   Sascha Hauer
      • [PATCH 3/3] ARM: Allow to compile in thumb-2 mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] drivers/serial: trivial regression fix   Robert Jarzmik
  • [PATCH] drivers/serial: trivial regression fix   Sascha Hauer
• [PATCH V3] arm/mach-pxa: add mioa701 board   Robert Jarzmik
  • [PATCH V3] arm/mach-pxa: add mioa701 board   Sascha Hauer

Last message date: Wed Feb 29 23:40:47 EST 2012
Archived on: Wed Feb 29 23:50:15 EST 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...