[PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.

[Sascha Hauer]

On Wed, Feb 01, 2012 at 11:05:20AM +0000, Premi, Sanjeev wrote:
> 
> > -----Original Message-----
> > From: Belisko Marek [mailto:marek.belisko at gmail.com] 
> > Sent: Wednesday, February 01, 2012 3:46 PM
> > To: Premi, Sanjeev
> > Cc: barebox at lists.infradead.org
> > Subject: Re: [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.
> > 
> > On Wed, Feb 1, 2012 at 10:32 AM, Premi, Sanjeev <premi at ti.com> wrote:
> > >> -----Original Message-----
> > >> From: barebox-bounces at lists.infradead.org
> > >> [mailto:barebox-bounces at lists.infradead.org] On Behalf Of
> > >> Marek Belisko
> > >> Sent: Wednesday, February 01, 2012 2:21 AM
> > >> To: barebox at lists.infradead.org
> > >> Cc: Marek Belisko
> > >> Subject: [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.
> > >>
> > >> Build for omap platform by default.
> > >>
> > >> Signed-off-by: Marek Belisko <marek.belisko at open-nandra.com>
> > >> ---
> > >>  arch/arm/boards/beagle/board.c          |    4 ++--
> > >>  arch/arm/boards/omap343xdsp/board.c     |    2 --
> > >>  arch/arm/boards/omap3evm/board.c        |    3 +--
> > >>  arch/arm/boards/phycard-a-l1/pca-a-l1.c |    3 ---
> > >>  arch/arm/configs/panda_xload_defconfig  |    1 -
> > >>  arch/arm/configs/phycard_a_l1_defconfig |    1 -
> > >>  arch/arm/mach-omap/Kconfig              |   10 ----------
> > >>  arch/arm/mach-omap/Makefile             |    3 +--
> > >>  drivers/mtd/nand/Kconfig                |    1 -
> > >>  9 files changed, 4 insertions(+), 24 deletions(-)
> > >>
> 
> [snip]...[snip]
> 
> > > The config option helps in reducing the extra code being built into
> > > the "xload" configurations - where the size matters.
> > >
> > > Instead of making this change, I suggest you add this in 
> > the defconfig
> > > for pandaboard:
> > > CONFIG_OMAP_GPMC=y
> > >
> > > It is much smaller change.

Yes, the change is smaller, but we show an option to the user which
he better not changes. It's better to just not ask questions which
have only one reasonable answer.

> > GPMC is common for omap platform so I don't see a benefit to add user
> > possibility to disable it and
> > then make his board un-bootable. Solution was proposed by Sascha :
> > http://www.spinics.net/lists/u-boot-v2/msg05897.html
> 
> I missed this discussion, but if in the early boot stages we aren't
> concerned about the devices on GPMC, then we shouldn't be initializing it.

I generally agree, but we are talking about a few writel here, it
shouldn't add more than a few bytes to the binary.

> 
> I don't have code in front of me, so can't say whether this is the
> case for xload configurations today - but I am assuming this was the
> original intent of having this option.
> 
> On OMAP3EVM, GPMC needs to be configured only if NAND and Ethernet are
> used. Else, the init can easily be skipped.
> 
> In patch 2/2 you mentioned about the kernel crash.
> Can you share the crash log?
> (or point me to a post which already has it)

The right(tm) fix is probably to fix this in the Kernel to not depend
on the bootloader.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |