freescale imx28 barebox supported?

[Sascha Hauer]

On Wed, Feb 08, 2012 at 08:26:05AM +0100, christian.buettner at rafi.de wrote:
> Hi all,
> is the imx28 from Freescale supported in barebox? I cannot find it in the 
> menuconfig list.
> UBoot supports the imx28, so i thought i can find it in barbox too..

Yes, it's supported. It's a different architecture than the classic i.MX
processors. You find it when you change the ARM system type to
"Freescale i.MX23/28 (mxs) based"

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |