[PATCH V3] arm/mach-pxa: add mioa701 board
Robert Jarzmik
robert.jarzmik at free.fr
Tue Feb 28 08:41:11 EST 2012
Add Mitac MioA701 board initial support.
The support provides basic boot and :
- a console over USB (serial gadget).
- the SD card support
- the MTD docg3 support
- the LCD support
Add a check in the default environment for a barebox.env
file on the first partition (FAT). If the file exists,
source it instead of the normal boot procedure.
Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
Since V1:
- taken into account Marc's review
- added SD+MTD
Since V2:
- added MFP setup for pxafb
- added pwm support for backlight
---
arch/arm/Makefile | 1 +
arch/arm/boards/mioa701/Makefile | 1 +
arch/arm/boards/mioa701/board.c | 278 ++++++++++++++++++++++
arch/arm/boards/mioa701/config.h | 22 ++
arch/arm/boards/mioa701/env/bin/barebox_update | 5 +
arch/arm/boards/mioa701/env/bin/init | 35 +++
arch/arm/boards/mioa701/env/bin/mtd_env_override | 4 +
arch/arm/boards/mioa701/env/bin/sdcard_override | 16 ++
arch/arm/boards/mioa701/env/config | 5 +
arch/arm/boards/mioa701/mioa701.h | 81 +++++++
arch/arm/configs/mioa701_defconfig | 62 +++++
arch/arm/mach-pxa/Kconfig | 18 ++
12 files changed, 528 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boards/mioa701/Makefile
create mode 100644 arch/arm/boards/mioa701/board.c
create mode 100644 arch/arm/boards/mioa701/config.h
create mode 100644 arch/arm/boards/mioa701/env/bin/barebox_update
create mode 100644 arch/arm/boards/mioa701/env/bin/init
create mode 100644 arch/arm/boards/mioa701/env/bin/mtd_env_override
create mode 100644 arch/arm/boards/mioa701/env/bin/sdcard_override
create mode 100644 arch/arm/boards/mioa701/env/config
create mode 100644 arch/arm/boards/mioa701/mioa701.h
create mode 100644 arch/arm/configs/mioa701_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9926280..b28a5b2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -83,6 +83,7 @@ board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack
board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
board-$(CONFIG_MACH_IMX21ADS) := imx21ads
board-$(CONFIG_MACH_IMX27ADS) := imx27ads
+board-$(CONFIG_MACH_MIOA701) := mioa701
board-$(CONFIG_MACH_MMCCPU) := mmccpu
board-$(CONFIG_MACH_MX1ADS) := mx1ads
board-$(CONFIG_MACH_NOMADIK_8815NHK) := nhk8815
diff --git a/arch/arm/boards/mioa701/Makefile b/arch/arm/boards/mioa701/Makefile
new file mode 100644
index 0000000..dcfc293
--- /dev/null
+++ b/arch/arm/boards/mioa701/Makefile
@@ -0,0 +1 @@
+obj-y += board.o
diff --git a/arch/arm/boards/mioa701/board.c b/arch/arm/boards/mioa701/board.c
new file mode 100644
index 0000000..6a67a03
--- /dev/null
+++ b/arch/arm/boards/mioa701/board.c
@@ -0,0 +1,278 @@
+/*
+ * (C) 2011 Robert Jarzmik <robert.jarzmik at free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <environment.h>
+#include <fs.h>
+#include <init.h>
+#include <partition.h>
+#include <led.h>
+#include <gpio.h>
+#include <pwm.h>
+
+#include <mach/devices.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/udc_pxa2xx.h>
+#include <mach/mci_pxa2xx.h>
+
+#include <asm/armlinux.h>
+#include <asm/io.h>
+#include <generated/mach-types.h>
+#include <asm/mmu.h>
+
+#include "mioa701.h"
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ * - the LTM0305A776C datasheet,
+ * - and the PXA27x Programmers' manual
+ */
+static struct pxafb_videomode mioa701_ltm0305a776c = {
+ {
+ .pixclock = 220000, /* CLK=4.545 MHz */
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 4,
+ .upper_margin = 5,
+ .lower_margin = 3,
+ },
+ .bpp = 16,
+};
+
+static void mioa701_lcd_power(int on)
+{
+ gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static void mioa701_lcd_backlight(int on)
+{
+ struct pwm_device *pwm0 = pwm_request("pxa_pwm0");
+
+ /*
+ * The backlight has a base frequency of 250kHz (<=> 4 ms).
+ */
+ if (on) {
+ pwm_enable(pwm0);
+ pwm_config(pwm0, 2000 * 1024, 4000 * 1024);
+ } else {
+ pwm_disable(pwm0);
+ }
+ pwm_free(pwm0);
+}
+
+static struct pxafb_platform_data mioa701_pxafb_info = {
+ .mode = &mioa701_ltm0305a776c,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .lcd_power = mioa701_lcd_power,
+ .backlight_power = mioa701_lcd_backlight,
+};
+
+#define MIO_LED(_name, _gpio) \
+ { .gpio = _gpio, .active_low = 1, .led = { .name = #_name, } }
+static struct gpio_led leds[] = {
+ MIO_LED(charging, GPIO10_LED_nCharging),
+ MIO_LED(blue, GPIO97_LED_nBlue),
+ MIO_LED(orange, GPIO98_LED_nOrange),
+ MIO_LED(vibra, GPIO82_LED_nVibra),
+ MIO_LED(keyboard, GPIO115_LED_nKeyboard),
+};
+
+
+static int is_usb_connected(void)
+{
+ return !gpio_get_value(GPIO13_nUSB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+ .udc_is_connected = is_usb_connected,
+ .gpio_pullup = GPIO22_USB_ENABLE,
+};
+
+static struct pxamci_platform_data mioa701_mmc_info = {
+ .gpio_power = GPIO91_SDIO_EN,
+};
+
+static int mioa701_devices_init(void)
+{
+ int i;
+ void *docg3_iospace;
+
+ pxa_add_pwm((void *)0x40b00000, 0);
+ pxa_add_fb((void *)0x44000000, &mioa701_pxafb_info);
+ pxa_add_mmc((void *)0x41100000, -1, &mioa701_mmc_info);
+ docg3_iospace = map_io_sections(0x0, (void *)0xe0000000, 0x2000);
+ add_generic_device("docg3", -1, NULL, (ulong) docg3_iospace, 0x2000,
+ IORESOURCE_MEM, NULL);
+ armlinux_set_bootparams((void *)0xa0000100);
+ armlinux_set_architecture(MACH_TYPE_MIOA701);
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++)
+ led_gpio_register(&leds[i]);
+ add_generic_device("pxa27x-udc", 0, NULL, 0x40600000,
+ 1024, IORESOURCE_MEM, &mioa701_udc_info);
+ return 0;
+}
+
+device_initcall(mioa701_devices_init);
+
+static unsigned long mioa701_pin_config[] = {
+ /* Mio global */
+ MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+ MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
+
+ /* Backlight PWM 0 */
+ GPIO16_PWM0_OUT,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+ MIO_CFG_OUT(GPIO87_LCD_POWER, AF0, DRIVE_LOW),
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+ MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+ MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+ /* USB */
+ MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
+ MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+ /* QCI */
+ GPIO12_CIF_DD_7,
+ GPIO17_CIF_DD_6,
+ GPIO50_CIF_DD_3,
+ GPIO51_CIF_DD_2,
+ GPIO52_CIF_DD_4,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO55_CIF_DD_1,
+ GPIO81_CIF_DD_0,
+ GPIO82_CIF_DD_5,
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+
+ /* Bluetooth */
+ MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
+ GPIO44_BTUART_CTS,
+ GPIO42_BTUART_RXD,
+ GPIO45_BTUART_RTS,
+ GPIO43_BTUART_TXD,
+ MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
+
+ /* GPS */
+ MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* GSM */
+ MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+ MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* Sound */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+ /* Leds */
+ MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+ /* Keyboard */
+ MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+ MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+ MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* Unknown */
+ MFP_CFG_IN(GPIO20, AF0),
+ MFP_CFG_IN(GPIO21, AF0),
+ MFP_CFG_IN(GPIO33, AF0),
+ MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+ MFP_CFG_IN(GPIO96, AF0),
+ MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+static int mioa701_coredevice_init(void)
+{
+ unsigned int cclk;
+ /* route pins */
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+
+ CCCR = CCCR_A | 0x20110;
+ cclk = 0x02;
+ asm volatile("mcr p14, 0, %0, c6, c0, 0 @ set CCLK"
+ : : "r" (cclk) : "cc");
+
+ return 0;
+}
+coredevice_initcall(mioa701_coredevice_init);
+
+static int mioa701_mem_init(void)
+{
+ arm_add_mem_device("ram0", 0xa0000000, 64 * 1024 * 1024);
+ return 0;
+}
+mem_initcall(mioa701_mem_init);
diff --git a/arch/arm/boards/mioa701/config.h b/arch/arm/boards/mioa701/config.h
new file mode 100644
index 0000000..390aa30
--- /dev/null
+++ b/arch/arm/boards/mioa701/config.h
@@ -0,0 +1,22 @@
+/*
+ * (C) 2011 Robert Jarzmik <robert.jarzmik at free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/mioa701/env/bin/barebox_update b/arch/arm/boards/mioa701/env/bin/barebox_update
new file mode 100644
index 0000000..564549b
--- /dev/null
+++ b/arch/arm/boards/mioa701/env/bin/barebox_update
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+# Page+OOB specific partitions
+addpart /dev/mtdraw0 1081344 at 3649536(msipl)
+addpart /dev/mtdraw0 270336 at 3649536(barebox)
diff --git a/arch/arm/boards/mioa701/env/bin/init b/arch/arm/boards/mioa701/env/bin/init
new file mode 100644
index 0000000..8a54da0
--- /dev/null
+++ b/arch/arm/boards/mioa701/env/bin/init
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+PATH=/env/bin
+export PATH
+
+. /env/config
+addpart /dev/mtd0 $mtdparts
+
+usbserial -s "Mio A701 usb gadget"
+led keyboard 0
+
+sdcard_override
+
+fb0.enable=1
+bmp /dev/mtd0.barebox-logo
+
+mtd_env_override
+if [ $? = 0 ]; then
+ echo "Switching to custom environment"
+ /env/init
+ exit
+fi
+
+echo "No custom environment found"
+echo -n "Hit any key to stop autoboot: "
+timeout -a $autoboot_timeout
+if [ $? != 0 ]; then
+ echo
+ echo "Welcome to barebox console"
+ exit
+fi
+
+echo "Booting linux kernel on docg3 chip ..."
+bootargs="$bootargs mtdparts=mtd0:$mtdparts root=/dev/mtd4"
+bootm /dev/mtd0.kernel
diff --git a/arch/arm/boards/mioa701/env/bin/mtd_env_override b/arch/arm/boards/mioa701/env/bin/mtd_env_override
new file mode 100644
index 0000000..faeb4d0
--- /dev/null
+++ b/arch/arm/boards/mioa701/env/bin/mtd_env_override
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+loadenv /dev/mtd0.barebox-env
+exit $?
diff --git a/arch/arm/boards/mioa701/env/bin/sdcard_override b/arch/arm/boards/mioa701/env/bin/sdcard_override
new file mode 100644
index 0000000..4b2ad51
--- /dev/null
+++ b/arch/arm/boards/mioa701/env/bin/sdcard_override
@@ -0,0 +1,16 @@
+#!/bin/sh
+# Script to switch to execute sdcard environment scripts if available
+#
+# This enables an override of the default environment if an SD Card
+# is inserted, has a FAT filesystem, and has a barebox.env file in
+# the root directory.
+
+mci0.probe=1
+if [ $mci0.probe = 1 ]; then
+ mkdir /sdcard
+ mount /dev/disk0.0 fat /sdcard
+ if [ -f /sdcard/barebox.env ]; then
+ loadenv /sdcard/barebox.env /env.sd
+ /env.sd/bin/init
+ fi
+fi
diff --git a/arch/arm/boards/mioa701/env/config b/arch/arm/boards/mioa701/env/config
new file mode 100644
index 0000000..2cc44fd
--- /dev/null
+++ b/arch/arm/boards/mioa701/env/config
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+autoboot_timeout=3
+
+mtdparts="256k at 3456k(barebox)ro,256k(barebox-logo),128k(barebox-env),4M(kernel),-(root)"
diff --git a/arch/arm/boards/mioa701/mioa701.h b/arch/arm/boards/mioa701/mioa701.h
new file mode 100644
index 0000000..20b9b51
--- /dev/null
+++ b/arch/arm/boards/mioa701/mioa701.h
@@ -0,0 +1,81 @@
+/*
+ * (C) 2011 Robert Jarzmik <robert.jarzmik at free.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_EN 9
+#define GPIO18_POWEROFF 18
+#define GPIO87_LCD_POWER 87
+#define GPIO96_AC_DETECT 96
+#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
+
+/* USB */
+#define GPIO13_nUSB_DETECT 13
+#define GPIO22_USB_ENABLE 22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO 78
+#define GPIO15_SDIO_INSERT 15
+#define GPIO91_SDIO_EN 91
+
+/* Bluetooth */
+#define GPIO14_BT_nACTIVITY 14
+#define GPIO83_BT_ON 83
+#define GPIO77_BT_UNKNOWN1 77
+#define GPIO86_BT_MAYBE_nRESET 86
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1 23
+#define GPIO26_GPS_ON 26
+#define GPIO27_GPS_RESET 27
+#define GPIO106_GPS_UNKNOWN2 106
+#define GPIO107_GPS_UNKNOWN3 107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD 24
+#define GPIO88_GSM_nMOD_ON_CMD 88
+#define GPIO90_GSM_nMOD_OFF_CMD 90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 114
+#define GPIO25_GSM_MOD_ON_STATE 25
+#define GPIO113_GSM_EVENT 113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT 12
+
+/* LEDS */
+#define GPIO10_LED_nCharging 10
+#define GPIO97_LED_nBlue 97
+#define GPIO98_LED_nOrange 98
+#define GPIO82_LED_nVibra 82
+#define GPIO115_LED_nKeyboard 115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER 0
+#define GPIO93_KEY_VOLUME_UP 93
+#define GPIO94_KEY_VOLUME_DOWN 94
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/configs/mioa701_defconfig b/arch/arm/configs/mioa701_defconfig
new file mode 100644
index 0000000..2bb3cec
--- /dev/null
+++ b/arch/arm/configs/mioa701_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARCH_PXA=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_BANNER is not set
+CONFIG_TEXT_BASE=0xa3f00000
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x262144
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_EXPERIMENTAL=y
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_HUSH_GETOPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/mioa701/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_LOADS=y
+CONFIG_CMD_SAVES=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_LED=y
+CONFIG_DRIVER_SERIAL_PXA=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_DEVICE=y
+CONFIG_MTD_DOCG3=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_SERIAL=y
+CONFIG_VIDEO=y
+CONFIG_DRIVER_VIDEO_PXA=y
+CONFIG_MCI=y
+CONFIG_MCI_PXA=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_FS_CRAMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_BZLIB=y
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 9ef11bb..750f466 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,9 +2,11 @@ if ARCH_PXA
config ARCH_TEXT_BASE
hex
+ default 0xa0000000 if MACH_MIOA701
config BOARDINFO
string
+ default "Scoter Mitac Mio A701" if MACH_MIOA701
# ----------------------------------------------------------
@@ -29,8 +31,24 @@ choice
prompt "PXA27x Board Type"
bool
+config MACH_MIOA701
+ bool "Mitac Mio A701"
+ select BCH_CONST_PARAMS
+ select PWM
+ help
+ Say Y here if you are using a Mitac Mio A701 smartphone
+ board
endchoice
+if MACH_MIOA701
+config BCH_CONST_M
+ int
+ default 14 if MACH_MIOA701
+config BCH_CONST_T
+ int
+ default 4 if MACH_MIOA701
+endif
+
endif
# ----------------------------------------------------------
--
1.7.5.4
More information about the barebox
mailing list