[PATCH 03/15] mci: fix high capacity detection

[Sascha Hauer]

Whether a card is high capacity is checked in
sd_send_op_cond/mmc_send_op_cond. Remove the wrong check in
mmc_change_freq which wrongly recognizes some eMMC flash
as high capacity.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/mci/mci-core.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index db69b27..8951c07 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -414,9 +414,6 @@ static int mmc_change_freq(struct device_d *mci_dev)
 		return err;
 	}
 
-	if (ext_csd[212] || ext_csd[213] || ext_csd[214] || ext_csd[215])
-		mci->high_capacity = 1;
-
 	cardtype = ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK;
 
 	err = mci_switch(mci_dev, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
-- 
1.7.9