[PATCH] Remove apparently superfluous Kconfig variable HAS_OMAP_NAND#

[Sascha Hauer]

On Tue, Feb 07, 2012 at 07:01:04AM -0500, Robert P. J. Day wrote:
> 
> Remove what is an apparently valueless Kconfig variable HAS_OMAP_NAND.
> A search of the entire source tree shows:
> 
> $ grep -r HAS_OMAP_NAND *
> arch/arm/mach-omap/Kconfig:	select HAS_OMAP_NAND
> arch/arm/mach-omap/Kconfig:	select HAS_OMAP_NAND
> arch/arm/mach-omap/Kconfig:	select HAS_OMAP_NAND
> arch/arm/mach-omap/Kconfig:	select HAS_OMAP_NAND
> arch/arm/mach-omap/Kconfig:config HAS_OMAP_NAND
> arch/arm/configs/phycard_a_l1_defconfig:CONFIG_HAS_OMAP_NAND=y
> $
> 
> where the definition of that variable is simply:
> 
> config HAS_OMAP_NAND
>         bool
> 
> so it seems pretty clear it can be removed as nothing is using it.
> 
> Signed-off-by: Robert P. J. Day <rpjday at crashcourse.ca>
> 

Applied to master.

Sascha

> ---
> 
>   compile-tested for beagleboard.  beyond that, it looks like a pretty
> safe removal.
> 
> diff --git a/arch/arm/configs/phycard_a_l1_defconfig b/arch/arm/configs/phycard_a_l1_defconfig
> index 95dffbb..64afcc2 100644
> --- a/arch/arm/configs/phycard_a_l1_defconfig
> +++ b/arch/arm/configs/phycard_a_l1_defconfig
> @@ -13,7 +13,6 @@ CONFIG_OMAP3_CLOCK_CONFIG=y
>  CONFIG_OMAP3_COPY_CLOCK_SRAM=n
>  CONFIG_OMAP_GPMC=y
>  CONFIG_MACH_PCAAL1=y
> -CONFIG_HAS_OMAP_NAND=y
>  CONFIG_AEABI=y
>  CONFIG_CMD_ARM_CPUINFO=y
>  CONFIG_ARM_EXCEPTIONS=y
> diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
> index 73125a7..6a5e674 100644
> --- a/arch/arm/mach-omap/Kconfig
> +++ b/arch/arm/mach-omap/Kconfig
> @@ -114,7 +114,6 @@ config MACH_OMAP343xSDP
>  	bool "Texas Instrument's SDP343x"
>  	select MACH_HAS_LOWLEVEL_INIT
>  	select OMAP_CLOCK_ALL
> -	select HAS_OMAP_NAND
>  	depends on ARCH_OMAP3
>  	help
>  	  Say Y here if you are using SDP343x platform
> @@ -124,7 +123,6 @@ config MACH_BEAGLE
>  	select MACH_HAS_LOWLEVEL_INIT
>  	select OMAP_CLOCK_ALL
>  	select HAVE_NOSHELL
> -	select HAS_OMAP_NAND
>  	depends on ARCH_OMAP3
>  	  help
>  	  Say Y here if you are using Beagle Board
> @@ -133,7 +131,6 @@ config MACH_OMAP3EVM
>  	bool "Texas Instrument's OMAP3 EVM"
>  	select MACH_HAS_LOWLEVEL_INIT
>  	select OMAP_CLOCK_ALL
> -	select HAS_OMAP_NAND
>  	depends on ARCH_OMAP3
>  	  help
>  	  Say Y here if you are using OMAP3EVM
> @@ -158,7 +155,6 @@ config MACH_PCAAL1
>  	bool "Phytec phyCARD-A-L1"
>  	select MACH_HAS_LOWLEVEL_INIT
>  	select OMAP_CLOCK_ALL
> -	select HAS_OMAP_NAND
>  	  help
>  	  Say Y here if you are using a phyCARD-A-L1 PCA-A-L1
> 
> @@ -190,7 +186,4 @@ config MACH_OMAP_ADVANCED_MUX
>  	  Say Y here if you would like to have complete pin muxing to be
>  	  done at boot time
> 
> -config HAS_OMAP_NAND
> -	bool
> -
>  endmenu
> 
> -- 
> 
> ========================================================================
> Robert P. J. Day                                 Ottawa, Ontario, CANADA
>                         http://crashcourse.ca
> 
> Twitter:                                       http://twitter.com/rpjday
> LinkedIn:                               http://ca.linkedin.com/in/rpjday
> ========================================================================
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |