"panda" config and build doesn't work on panda ES at all

[Eric Bénard]

Hi,
Le Wed, 8 Feb 2012 17:20:45 -0500 (EST),
"Robert P. J. Day" <rpjday at crashcourse.ca> a écrit :
>   just for fun, i configured and built MLO and barebox.bin for the
> panda, then tried to use that on a panda ES -- got no response
> whatever from minicom.  i did verify that i could boot to barebox just
> fine on a regular panda, though.
> 
>   this is different from the case of a regular beagle and beagle xM,
> for which the MLO and barebox.bin boot just fine on an xM, so there's
> clearly a significant difference between those two panda variants as
> far as barebox is concerned.  i haven't had any time to look at it in
> more detail yet.
> 
Panda ES has a OMAP4460 @ 1.2GHz Panda has a OMAP4430 @ 1GHz.
This patch series shows that some changes are really needed to switch
from the 4430 to the 4460 :
http://lists.denx.de/pipermail/u-boot/2011-July/096351.html

Eric
-- 
http://eukrea.com/en/news/104-2012