June 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Jun 1 23:55:40 PDT 2014
Ending: Mon Jun 30 23:59:47 PDT 2014
Messages: 471

• [PATCH V2] sama5d3x: fix AT91_SMC_CS offset stride   Sascha Hauer
• [PATCH 09/10] beautify PHY driver names   Sascha Hauer
• [PATCH 10/10] device drivers: harmonize underscore in driver names   Sascha Hauer
• [PATCH 00/10] miscelleanous beautification patches   Sascha Hauer
• [PATCH] serial: imx: Fix buggy transmissions when baudrate mismatches   Sascha Hauer
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Sascha Hauer
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Holger Schurig
• [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer   Juergen Borleis
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Sascha Hauer
• [RFC] net: picoping: try to make it asynchronious: fail   Sascha Hauer
• [RFC] picotcp.20140530   Sascha Hauer
• [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer   Holger Schurig
• [RFC] net: picoping: try to make it asynchronious: fail   Daniele Lacamera
• [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer   Juergen Borleis
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Antony Pavlov
• [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer   Holger Schurig
• [PATCH] serial: imx: Fix buggy transmissions when baudrate mismatches   Fabio Estevam
• [PATCH] ARM: AM3xxx: Add support for building AM33xx spi images   Rolf Evers-Fischer
• [RFC] net: picoping: try to make it asynchronious: fail   Daniele Lacamera
• [PATCH v2] serial: imx: Fix buggy transmissions when baudrate mismatches   Fabio Estevam
• [RFC] picotcp.20140530   Antony Pavlov
• [PATCH v2] serial: imx: Fix buggy transmissions when baudrate mismatches   Sascha Hauer
• [PATCH] ARM: hummingboard: add barebox update handler   Lucas Stach
• [PATCH] ARM: atmel: add sama5d3_xplained support   Bo Shen
• [PATCH] ARM: hummingboard: add barebox update handler   Sascha Hauer
• [PATCH 00/30] Tegra K1 support   Lucas Stach
• [PATCH 01/30] mci: implement non-removable property   Lucas Stach
• [PATCH 02/30] tegra: lowlevel-dvc: use __always_inline macro   Lucas Stach
• [PATCH 03/30] tegra: pmc: add Tegra30 compatible   Lucas Stach
• [PATCH 04/30] tegra: pmc: add command to get into RCM   Lucas Stach
• [PATCH 05/30] tegra: lowlevel: setup an early stack   Lucas Stach
• [PATCH 06/30] tegra: add Tegra124 id to lowlevel functions   Lucas Stach
• [PATCH 07/30] tegra: lowlevel: fix ODMdata fetch on Tegra124   Lucas Stach
• [PATCH 08/30] tegra: recognize Tegra124 in maincomplex startup   Lucas Stach
• [PATCH 09/30] tegra: recognize Tegra124 in common initcalls   Lucas Stach
• [PATCH 10/30] tegra: add Tegra124 and AS3722 PMIC to lowlevel-dvc   Lucas Stach
• [PATCH 11/30] tegra: disable IDDQ for PLL_X on Tegra124   Lucas Stach
• [PATCH 12/30] tegra: power up additional partitions on Tegra124   Lucas Stach
• [PATCH 13/30] tegra: fix MESLECT clock enable   Lucas Stach
• [PATCH 14/30] tegra: change cpu internal reset layout for Tegra124   Lucas Stach
• [PATCH 15/30] tegra: add Tegra124 PLL_X rate setup   Lucas Stach
• [PATCH 16/30] tegra: apply cluster switch logic to all SoCs >=T30   Lucas Stach
• [PATCH 17/30] tegra: hardcode entry address for main cluster   Lucas Stach
• [PATCH 18/30] tegra: setup L2 cache on Tegra124   Lucas Stach
• [PATCH 19/30] tegra: add architectural timer init   Lucas Stach
• [PATCH 20/30] tegra: add Tegra124 Kconfig symbol   Lucas Stach
• [PATCH 21/30] pinctrl: tegra30: introduce drvdata   Lucas Stach
• [PATCH 22/30] pinctrl: tegra: add Tegra124 support   Lucas Stach
• [PATCH 23/30] clk: tegra: allow variable sized muxes   Lucas Stach
• [PATCH 24/30] clk: tegra: don't bug out on zero PLL postdiv   Lucas Stach
• [PATCH 25/30] clk: tegra: add Tegra124 driver   Lucas Stach
• [PATCH 26/30] mci: tegra: add Tegra124 compatible   Lucas Stach
• [PATCH 27/30] tegra: pmc: add Tegra124 compatible   Lucas Stach
• [PATCH 28/30] images: add Tegra124 image build rules   Lucas Stach
• [PATCH 29/30] tegra: add NVIDIA Jetson-TK1 board support   Lucas Stach
• [PATCH 30/30] tegra: refresh defconfig   Lucas Stach
• [PATCH] ARM: atmel: add sama5d3_xplained support   Sascha Hauer
• [PATCH 00/30] Tegra K1 support   Sascha Hauer
• redirect stdout   Thibaut Dambry
• redirect stdout   Sascha Hauer
• redirect stdout   Thibaut Dambry
• v2014.06.0   Sascha Hauer
• redirect stdout   Sascha Hauer
• Fix Compiler warnings   Sascha Hauer
• [PATCH 1/9] fix format specifiers   Sascha Hauer
• [PATCH 2/9] ARM: MXS: Remove unused variables   Sascha Hauer
• [PATCH 3/9] ARM: friendlyarm_mini2440: refresh defconfig   Sascha Hauer
• [PATCH 4/9] mips: dlink-dir-320: refresh defconfig   Sascha Hauer
• [PATCH 5/9] mips: ar9331: Add missing #address-cells/#size-cells properties   Sascha Hauer
• [PATCH 6/9] PPC: FSL DDR: Fix compiler warning   Sascha Hauer
• [PATCH 7/9] commands: drvinfo: Make locally used function static   Sascha Hauer
• [PATCH 8/9] gui: IMAGE_RENDERER does not depend on VIDEO   Sascha Hauer
• [PATCH 9/9] mips: Add builtin dtb to dtb-y   Sascha Hauer
• [PATCH 4/9] mips: dlink-dir-320: refresh defconfig   Antony Pavlov
• [PATCH] ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO   Sascha Hauer
• [PATCH 4/9] mips: dlink-dir-320: refresh defconfig   Sascha Hauer
• [PATCH 1/3] ARM: clps711x: Prepare common init function to DT support   Alexander Shiyan
• [PATCH 2/3] ARM: clps711x: Remove unused UART bit definitions   Alexander Shiyan
• [PATCH 3/3] ARM: clep7212: Make partition names more generic   Alexander Shiyan
• [PATCH] 2048: Reset score on startup   Alexander Shiyan
• [PATCH] ARM: PCM038: Switch to devicetree probe   Alexander Shiyan
• [PATCH] ARM: dts: Remove orphaned i.MX27 DT template   Alexander Shiyan
• picoTCP, barebox, and licenses   Frederik Van Slycken
• picoTCP, barebox, and licenses   Robert Schwebel
• picoTCP, barebox, and licenses   Frederik Van Slycken
• picoTCP, barebox, and licenses   Frederik Van Slycken
• [PATCH] 2048: Reset score on startup   Sascha Hauer
• [PATCH 1/3] ARM: clps711x: Prepare common init function to DT support   Sascha Hauer
• [PATCH] ARM: dts: Remove orphaned i.MX27 DT template   Sascha Hauer
• picoTCP, barebox, and licenses   Antony Pavlov
• [RFC] [WIP] net: add initial ENC28J60 support   Antony Pavlov
• Re: [PATCH] 2048: Reset score on startup   Alexander Shiyan
• [PATCH] sama5d3x HSMC NAND: MODE and TIMINGS registers   Matteo Fortini
• [PATCH 1/2] sama5d3x: fix HSMC MODE register offset and add TIMINGS register   Matteo Fortini
• [PATCH 2/2] sama5d3x: HSMC NAND initialize TIMINGS and import values from U-Boot   Matteo Fortini
• Re: [PATCH] ARM: dts: Remove orphaned i.MX27 DT template   Alexander Shiyan
• [PATCH] ARM: dts: Remove skeleton.dtsi   Alexander Shiyan
• [PATCH 1/2] make .gitignore files visible to git   Antony Pavlov
• [PATCH 2/2] MIPS: dts: add .gitignore for generated files   Antony Pavlov
• picoTCP, barebox, and licenses   Antony Pavlov
• [PATCH 1/2] mtd: Fix writesize parameter value   Herve Codina
• [PATCH 2/2] mtd: fix mtd erasesize   Herve Codina
• picoTCP, barebox, and licenses   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] sama5d3x: fix HSMC MODE register offset and add TIMINGS register   Sascha Hauer
• [PATCH 1/2] mtd: Fix writesize parameter value   Sascha Hauer
• [RFC] [WIP] net: add initial ENC28J60 support   Sascha Hauer
• [PATCH 1/2] make .gitignore files visible to git   Sascha Hauer
• [PATCH] ARM: PCM038: Switch to devicetree probe   Sascha Hauer
• [PATCH 1/2] mtd: partition: Fix multi eraseregion chips   Sascha Hauer
• [PATCH 2/2] mtd: partition: implement lock/unlock   Sascha Hauer
• [RFC] [WIP] net: add initial ENC28J60 support   Antony Pavlov
• [PATCH] treewide: remove address of the Free Software Foundation   Antony Pavlov
• [RFC] [WIP] net: add initial ENC28J60 support   Sascha Hauer
• [PATCH] ARM: dts: Remove orphaned i.MX27 DT template   Sascha Hauer
• [PATCH] mips: Fix dtb build rules   Sascha Hauer
• [PATCH] treewide: remove address of the Free Software Foundation   Sascha Hauer
• dev_param_int_ro   Herve Codina
• dev_param_int_ro   Sascha Hauer
• i.MX6Q SABRESD board and barebox   Andrey Smirnov
• i.MX6Q SABRESD board and barebox   Sascha Hauer
• [PATCH] ARM: Phytec-phyCARD-imx27: Add missing compatible check   Sascha Hauer
• [PATCH 1/4] ARM: i.MX6 sabresd: Drop board defconfig   Sascha Hauer
• [PATCH 2/4] ARM: i.MX6 sabrelite: Drop board defconfig   Sascha Hauer
• [PATCH 3/4] ARM: i.MX51 babbage: Drop board defconfig   Sascha Hauer
• [PATCH 4/4] ARM: i.MX53 QSB: Drop board defconfig   Sascha Hauer
• phyCORE-imx27 updates   Sascha Hauer
• [PATCH 1/5] ARM: uncompress.c: copy executable to SDRAM if necessary   Sascha Hauer
• [PATCH 2/5] ARM: Phytec-phyCORE-imx27: Register board env during runtime   Sascha Hauer
• [PATCH 3/5] ARM: i.MX bbu: Add update handler for external NOR boot   Sascha Hauer
• [PATCH 4/5] ARM: Phytec-phyCORE-imx27: Register NOR/NAND update handlers   Sascha Hauer
• [PATCH 5/5] ARM: Phytec-phyCORE-imx27: Switch to multiimage support   Sascha Hauer
• [PATCH 1/2] param: Add support for long long read only dev param   Herve Codina
• [PATCH 2/2] mtd: use long long dev param for size   Herve Codina
• atmel_nand pmecc on 8k page   Raphaël Poggi
• atmel_nand pmecc on 8k page   Bo Shen
• [PATCH 1/2] param: Add support for long long read only dev param   Sascha Hauer
• CFI FLash on a 8 bits bus working ?   Franck Jullien
• [RFC][PATCH 00/18] am33x: add musb   Christoph Fritz
• [PATCH 01/18] arm: am33xx: add USB clocks   Christoph Fritz
• [PATCH 02/18] arm: am33xx: add pinmux config for USB   Christoph Fritz
• [PATCH 03/18] linux wrapper: add more dummy spin_lock stubs   Christoph Fritz
• [PATCH 05/18] musb: delete unused include files   Christoph Fritz
• [PATCH 06/18] musb: move musb.h to path include/usb   Christoph Fritz
• [PATCH 07/18] musb: drop gadget support - remove appropriate files   Christoph Fritz
• [PATCH 08/18] musb: use __BAREBOX__ macro   Christoph Fritz
• [PATCH 09/18] musb: adapt Kconfig and Makefiles   Christoph Fritz
• [PATCH 10/18] arm: pcm051: enable musb in defconfig   Christoph Fritz
• [PATCH 11/18] musb: adapt driver to work on barebox   Christoph Fritz
• [PATCH 12/18] musb: only support USB_SPEED_HIGH devices   Christoph Fritz
• [PATCH 13/18] usb: add musb support   Christoph Fritz
• [PATCH 14/18] arm: am33xx: add usb base addresses   Christoph Fritz
• [PATCH 15/18] arm: am33xx: add usb platform helper code   Christoph Fritz
• [PATCH 16/18] musb: add barebox gluecode   Christoph Fritz
• [PATCH 17/18] arm: pcm051: enable USB pinmux   Christoph Fritz
• [PATCH 18/18] arm: pcm051: enable USB   Christoph Fritz
• atmel_nand pmecc on 8k page   Raphaël Poggi
• atmel_nand pmecc on 8k page [RFC]   Matteo Fortini
• i.MX6Q SABRESD board and barebox   Andrey Smirnov
• CFI FLash on a 8 bits bus working ?   Franck Jullien
• i.MX6Q SABRESD board and barebox   Holger Schurig
• i.MX6Q SABRESD board and barebox   Andrey Smirnov
• [PATCH 11/18] musb: adapt driver to work on barebox   Michael Grzeschik
• atmel_nand pmecc on 8k page [RFC]   Bo Shen
• [RFC v2 1/2] [WIP] net.h: add ETH_ALEN constant; fix whitespaces   Antony Pavlov
• [RFC v2 2/2] [WIP] net: add initial ENC28J60 support   Antony Pavlov
• [PATCH] [WIP] i2c: add Marvell 64xxx driver   Antony Pavlov
• [RFC 1/2] [WIP] i2c: import SMBus stuff from linux   Antony Pavlov
• [RFC 2/2] [WIP] gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders   Antony Pavlov
• [PATCH] [WIP] i2c: add Marvell 64xxx driver   Antony Pavlov
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Philipp Zabel
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Antony Pavlov
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Sascha Hauer
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Antony Pavlov
• [PATCH] commands: gpio_direction_output: add missed VALUE parameter to help message   Antony Pavlov
• [PATCH 11/18] musb: adapt driver to work on barebox   Christoph Fritz
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Sascha Hauer
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Sascha Hauer
• [PATCH] commands: gpio_direction_output: add missed VALUE parameter to help message   Sascha Hauer
• [PATCH] [WIP] i2c: add Marvell 64xxx driver   Sascha Hauer
• [PATCH] ARM: AM335x: Beaglebone: Fix memory setup for Beaglebone black   Antony Pavlov
• i.MX6 frame buffer inside barebox?   Holger Schurig
• [PATCH] commands: ls: add ll as an alias for ls -l   Jan Luebbe
• [PATCH 1/2] ARM: AM335x: beaglebone: remove obsolete config   Jan Luebbe
• [PATCH 2/2] ARM: AM335x: beaglebone: add simple script to change usb current limit   Jan Luebbe
• i.MX6 frame buffer inside barebox?   Sascha Hauer
• atmel_nand pmecc on 8k page [RFC]   Jean-Christophe PLAGNIOL-VILLARD
• atmel_nand pmecc on 8k page [RFC]   Bo Shen
• [PATCH 1/1] passwd: Support passwd file custom directory   Herve Codina
• [PATCH 0/4] ARM: versatile: switch to devicetree support   Antony Pavlov
• [PATCH 1/4] ARM: versatile: drop redundant <mach/gpio.h>   Antony Pavlov
• [PATCH 2/4] i2c: versatile: add devicetree support   Antony Pavlov
• [PATCH 3/4] ARM: versatile: switch to devicetree support   Antony Pavlov
• [PATCH 4/4] ARM: versatilepb_defconfig: enable devicetree support   Antony Pavlov
• [RFC 1/2] kirkwood: add support for booting via oftree probe   Alexander Aring
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Alexander Aring
• [RFC 1/2] kirkwood: add support for booting via oftree probe   Sebastian Hesselbarth
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Sebastian Hesselbarth
• [RFC v2 2/2] [WIP] net: add initial ENC28J60 support   Sascha Hauer
• [RFC 2/2] [WIP] gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders   Sascha Hauer
• [RFC 1/2] [WIP] i2c: import SMBus stuff from linux   Sascha Hauer
• [PATCH] commands: ls: add ll as an alias for ls -l   Sascha Hauer
• [PATCH 1/2] ARM: AM335x: beaglebone: remove obsolete config   Sascha Hauer
• [PATCH 0/4] ARM: versatile: switch to devicetree support   Sascha Hauer
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Alexander Aring
• [RFC 1/2] kirkwood: add support for booting via oftree probe   Alexander Aring
• [PATCH] net: ifup: skip *-discover files for ifup -a   Sascha Hauer
• [PATCH] remove unused boot-menu-add-entry   Sascha Hauer
• [PATCH] commands: ls: add ll as an alias for ls -l   Holger Schurig
• [PATCH] ARM: i.MX: remove console= from env files   Sascha Hauer
• i.MX6 frame buffer inside barebox?   Holger Schurig
• i.MX6 frame buffer inside barebox?   Sascha Hauer
• [PATCH] commands: ls: add ll as an alias for ls -l   Sascha Hauer
• [PATCH] common: resource: print conflicts as warning   Alexander Aring
• [PATCH] commands: ls: add ll as an alias for ls -l   Alexander Aring
• i.MX6 frame buffer inside barebox?   Holger Schurig
• SFI NOR sizes totally off ?!?   Holger Schurig
• SFI NOR sizes totally off ?!?   Sascha Hauer
• i.MX6 frame buffer inside barebox?   Sascha Hauer
• i.MX6 frame buffer inside barebox?   Robert Schwebel
• [PATCH 0/7] Marvell MVEBU assorted fixes and cleanup   Sebastian Hesselbarth
• [PATCH 1/7] ARM: mvebu: set model and default hostname for Dove   Sebastian Hesselbarth
• [PATCH 2/7] ARM: mvebu: set default TEXT_BASE by SoC   Sebastian Hesselbarth
• [PATCH 3/7] ARM: mvebu: delete unused mach/mvebu.h   Sebastian Hesselbarth
• [PATCH 4/7] ARM: mvebu: move lowlevel code to lowlevel.c   Sebastian Hesselbarth
• [PATCH 5/7] clk: mvebu: fix Armada 370 TCLK frequencies   Sebastian Hesselbarth
• [PATCH 6/7] ARM: mvebu: add 25MHz fixed clock for Armada XP   Sebastian Hesselbarth
• [PATCH 7/7] clocksource: mvebu: split initialization for Armada 370/XP   Sebastian Hesselbarth
• [PATCH 00/11] Convert MVEBU SoCs to DT and PBL_MULTI_IMAGE   Sebastian Hesselbarth
• [PATCH 01/11] ARM: dts: sort pbl entries by alphabet   Sebastian Hesselbarth
• [PATCH 02/11] ARM: mvebu: sort pbl image target by board   Sebastian Hesselbarth
• [PATCH 03/11] ARM: mvebu: convert Kirkwood devices to be probed from DT   Sebastian Hesselbarth
• [PATCH 04/11] ARM: mvebu: convert Armada 370/XP devices to be probed from DT   Sebastian Hesselbarth
• [PATCH 05/11] ARM: mvebu: convert Globalscale Guruplug to PBL_MULTI_IMAGES   Sebastian Hesselbarth
• [PATCH 06/11] ARM: mvebu: convert USI Topkick to PBL_MULTI_IMAGES   Sebastian Hesselbarth
• [PATCH 07/11] ARM: mvebu: convert Globalscale Mirabox to PBL_MULTI_IMAGES   Sebastian Hesselbarth
• [PATCH 08/11] ARM: mvebu: convert Marvell Armada XP GP to PBL_MULTI_IMAGES   Sebastian Hesselbarth
• [PATCH 09/11] ARM: mvebu: convert PlatHome Openblocks AX3-4 to PBL_MULTI_IMAGES   Sebastian Hesselbarth
• [PATCH 10/11] ARM: mvebu: convert to multiple board selection   Sebastian Hesselbarth
• [PATCH 11/11] ARM: mvebu: remove dtb Makefile entries   Sebastian Hesselbarth
• [PATCH 0/7] MIPS: malta: enable gpio & i2c stuff   Antony Pavlov
• [PATCH 1/7] gpio: add Malta CBUS FPGA I2C driver   Antony Pavlov
• [PATCH 2/7] MIPS: add <asm/gpio.h> header file   Antony Pavlov
• [PATCH 3/7] MIPS: malta: enable gpiolib   Antony Pavlov
• [PATCH 4/7] MIPS: dts: qemu-malta.dts: enable CBUS FPGA I2C gpio driver   Antony Pavlov
• [PATCH 5/7] i2c: i2c_gpio: add devicetree support   Antony Pavlov
• [PATCH 6/7] MIPS: dts: qemu-malta.dts: use i2c-gpio for accessing CBUS FPGA I2C bus   Antony Pavlov
• [PATCH 7/7] MIPS: qemu-malta_defconfig: enable gpio & i2c stuff   Antony Pavlov
• [PATCH] common: resource: print conflicts as warning   Sascha Hauer
• [PATCH 0/7] Marvell MVEBU assorted fixes and cleanup   Sascha Hauer
• [RFC] incorporate picotcp into barebox   Antony Pavlov
• [PATCH 1/3] arm: imx6: move imx6_init_lowlevel to single initcall   Lucas Stach
• [PATCH 2/3] arm: imx6: rename hummingboard directory to microsom   Lucas Stach
• [PATCH 3/3] scripts: tegra: add gitignore   Lucas Stach
• [PATCH 00/11] Convert MVEBU SoCs to DT and PBL_MULTI_IMAGE   Sascha Hauer
• [PATCH 5/7] i2c: i2c_gpio: add devicetree support   Sascha Hauer
• [PATCH 0/7] MIPS: malta: enable gpio & i2c stuff   Sascha Hauer
• [PATCH 1/3] arm: imx6: move imx6_init_lowlevel to single initcall   Sascha Hauer
• [RFC] incorporate picotcp into barebox   Daniele Lacamera
• [PATCH 0/4] Orion GBE fixes and Marvell PHY driver   Sebastian Hesselbarth
• [PATCH 1/4] of: net: respect phy-connection-type property   Sebastian Hesselbarth
• [PATCH 2/4] net: orion: generate unique port device names   Sebastian Hesselbarth
• [PATCH 3/4] net: orion-gbe: extend RGMII detection to delayed modes   Sebastian Hesselbarth
• [PATCH 4/4] net: phy: add support for Marvell PHY drivers   Sebastian Hesselbarth
• [PATCH] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Sebastian Hesselbarth
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Sebastian Hesselbarth
• [PATCH V2] SAMA5D3 SMC: Fix CS offset and add TIMINGS register   Matteo Fortini
• [PATCH 1/2] sama5d3x: fix HSMC MODE register offset and add TIMINGS register   Matteo Fortini
• [PATCH 2/2] sama5d3x: HSMC NAND initialize TIMINGS and import values from U-Boot   Matteo Fortini
• [PATCH 0/3] MVEBU SoC ID and revision detection   Sebastian Hesselbarth
• [PATCH 1/3] drivers: of: import PCI bus specific translator   Sebastian Hesselbarth
• [PATCH 2/3] ARM: mvebu: select PCI specific DT bus translator   Sebastian Hesselbarth
• [PATCH 3/3] ARM: mvebu: determine SoC id and revision from PCIe nodes   Sebastian Hesselbarth
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Sebastian Hesselbarth
• [PATCH] i2c: omap: fix typo in dt_ids   Raphael Poggi
• [PATCH 1/2] sama5d3x: fix HSMC MODE register offset and add TIMINGS register   Bo Shen
• [PATCH] MIPS: mach-ath79: drop extra 'select HAVE_CLK'   Antony Pavlov
• [PATCH 0/4] Orion GBE fixes and Marvell PHY driver   Sascha Hauer
• [PATCH 1/2] sama5d3x: fix HSMC MODE register offset and add TIMINGS register   Sascha Hauer
• [PATCH 0/3] MVEBU SoC ID and revision detection   Sascha Hauer
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Sascha Hauer
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Sascha Hauer
• [PATCH] MIPS: mach-ath79: drop extra 'select HAVE_CLK'   Sascha Hauer
• [PATCH 1/4] arm: add errata workarounds   Lucas Stach
• [PATCH 2/4] arm: imx6: add cpu lowlevel init function   Lucas Stach
• [PATCH 3/4] arm: imx6: use imx6 specific cpu init function   Lucas Stach
• [PATCH 4/4] arm: tegra: enable ARM errata workarounds   Lucas Stach
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Sebastian Hesselbarth
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Alexander Aring
• i.MX6 frame buffer inside barebox?   Holger Schurig
• [PATCH FIXUP] pinctrl: mvebu: fixup mpp_base check   Sebastian Hesselbarth
• [PATCH RFC 0/4] MVEBU SoC full USB support   Sebastian Hesselbarth
• [PATCH RFC 1/4] usb: add Marvell MVEBU USB support   Sebastian Hesselbarth
• [PATCH RFC 2/4] ARM: dts: add new USB nodes to Kirkwood Guruplug   Sebastian Hesselbarth
• [PATCH RFC 3/4] ARM: dts: add new USB nodes to Dove CuBox   Sebastian Hesselbarth
• [PATCH RFC 4/4] ARM: dts: add new USB nodes to Armada 370 Mirabox   Sebastian Hesselbarth
• How to disable console late?   Holger Schurig
• [PATCH RFC 0/4] MVEBU SoC full USB support   Jason Cooper
• [PATCH RFC 0/4] MVEBU SoC full USB support   Sebastian Hesselbarth
• [PATCH RFC 0/4] MVEBU SoC full USB support   Thomas Petazzoni
• [RFC v3 0/5] barebox PCI support   Antony Pavlov
• [RFC v3 1/5] PCI: initial commit   Antony Pavlov
• [RFC v3 2/5] commands: add 'lspci' command   Antony Pavlov
• [RFC v3 3/5] net: add RealTek RTL-8139 PCI Ethernet driver   Antony Pavlov
• [RFC v3 4/5] MIPS: add PCI support for GT64120-based Malta board   Antony Pavlov
• [RFC v3 5/5] MIPS: qemu-malta_defconfig: enable PCI & network stuff   Antony Pavlov
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Alexander Aring
• How to disable console late?   Sascha Hauer
• i.MX6 frame buffer inside barebox?   Sascha Hauer
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Sascha Hauer
• [PATCH FIXUP] pinctrl: mvebu: fixup mpp_base check   Sascha Hauer
• [PATCH 1/4] arm: add errata workarounds   Sascha Hauer
• [PATCH] kconfig: Fix compiler warning   Sascha Hauer
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Sebastian Hesselbarth
• [PATCH 0/4] sandbox: prepare for static checkers   Holger Schurig
• [PATCH 1/4] commands: include missing header   Holger Schurig
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Holger Schurig
• [PATCH 3/4] sandbox: add bit manipulation stuff   Holger Schurig
• [PATCH 4/4] sandbox: allow "make ARCH=sandbox allyesconfig"   Holger Schurig
• New Documentation for barebox   Sascha Hauer
• [PATCH 1/7] ubiformat: avoid macros in help text   Sascha Hauer
• [PATCH 2/7] automount: fix description typo   Sascha Hauer
• [PATCH 3/7] commands: addpart: Improve description   Sascha Hauer
• [PATCH 4/7] Documentation: remove doxygen documentation   Sascha Hauer
• [PATCH 5/7] Documentation: remove remaining documentation   Sascha Hauer
• [PATCH 6/7] Documentation: remove devicetree docs   Sascha Hauer
• [PATCH 7/7] Documentation: Add new sphinxs docs   Sascha Hauer
• [PATCH] kconfig: Fix compiler warning   Alexander Aring
• New Documentation for barebox   Holger Schurig
• New Documentation for barebox   Sascha Hauer
• [RFC 2/2] dns325: initial support for D-Link DNS-325   Alexander Aring
• New Documentation for barebox   Holger Schurig
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Alexander Aring
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Alexander Aring
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Holger Schurig
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Alexander Aring
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Alexander Aring
• New Documentation for barebox   Holger Schurig
• New Documentation for barebox   Lucas Stach
• Booting barebox on i.MX6 from SDCARD?   Holger Schurig
• New Documentation for barebox   Holger Schurig
• Booting barebox on i.MX6 from SDCARD?   Lucas Stach
• New Documentation for barebox   Antony Pavlov
• New Documentation for barebox   Robert P. J. Day
• [PATCH 1/3] arm: imx6: move imx6_init_lowlevel to single initcall   Holger Schurig
• [PATCH RFC 0/4] MVEBU SoC full USB support   Sebastian Hesselbarth
• [PATCH] imx6:phyFLEX: Fix ENTRY_FUNCTION   Christian Hemp
• [PATCH] imx6:phyFLEX: Fix ENTRY_FUNCTION   Alexander Aring
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Alexander Aring
• New Documentation for barebox   Sascha Hauer
• New Documentation for barebox   Sascha Hauer
• a couple consistent misspellings that could be fixed   Robert P. J. Day
• New Documentation for barebox   Sascha Hauer
• [PATCH v2] pinctrl: mvebu: add pinctrl drivers for Dove and Kirkwood   Sascha Hauer
• a couple consistent misspellings that could be fixed   Sascha Hauer
• [PATCH 4/4] sandbox: allow "make ARCH=sandbox allyesconfig"   Sascha Hauer
• [PATCH 1/4] commands: include missing header   Sascha Hauer
• [PATCH 3/4] sandbox: add bit manipulation stuff   Sascha Hauer
• [PATCH] imx6:phyFLEX: Fix ENTRY_FUNCTION   Sascha Hauer
• Booting barebox on i.MX6 from SDCARD?   Sascha Hauer
• [PATCH] Fix misspellings of "persistant" -> "persistent" in various places   Robert P. J. Day
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Sascha Hauer
• [PATCH 1/3] arm: imx6: move imx6_init_lowlevel to single initcall   Sascha Hauer
• AM335x NAND   Stefan Müller-Klieser
• [PATCH] Support for booting ELF images.   Owen Kirby
• where is Documentation/parameters.txt?   Robert P. J. Day
• where is cpu/arm920t/imx/interrupts.c?   Robert P. J. Day
• [PATCH] Support for booting ELF images.   Antony Pavlov
• [PATCH 0/4] MIPS: XBurst: add gpio support   Antony Pavlov
• [PATCH 1/4] gpio: add jz4740-gpio driver for Ingenic MIPS SoCs   Antony Pavlov
• [PATCH 2/4] MIPS: XBurst: use gpiolib   Antony Pavlov
• [PATCH 3/4] MIPS: dts: jz4755.dtsi: add gpio   Antony Pavlov
• [PATCH 4/4] MIPS: ritmix-rzx50_defconfig: enable gpio stuff   Antony Pavlov
• [PATCH] Support for booting ELF images.   Owen Kirby
• where is Documentation/parameters.txt?   Sascha Hauer
• [PATCH] Support for booting ELF images.   Antony Pavlov
• [PATCH] Support for booting ELF images.   Antony Pavlov
• [PATCH 2/4] sandbox: only access of_add_memory_bank if it's defined   Alexander Aring
• where is Documentation/parameters.txt?   Robert P. J. Day
• Booting barebox on i.MX6 from SDCARD?   Holger Schurig
• [PATCH 1/3] arm: imx6: move imx6_init_lowlevel to single initcall   Holger Schurig
• where is Documentation/parameters.txt?   Holger Schurig
• Booting barebox on i.MX6 from SDCARD?   Sascha Hauer
• [PATCH 00/12] documentation updates   Holger Schurig
• [PATCH 01/12] doc: .gitignore generated files   Holger Schurig
• [PATCH 02/12] doc: make "System setup" an appendix   Holger Schurig
• [PATCH 03/12] doc: start (almost) all headlines with a capital   Holger Schurig
• [PATCH 04/12] doc: only include own download chapter   Holger Schurig
• [PATCH 05/12] doc: filesystemtype -> filesystem type   Holger Schurig
• [PATCH 06/12] doc: mention "make xconfig"   Holger Schurig
• [PATCH 07/12] doc: add colon after NOTE and HINT   Holger Schurig
• [PATCH 08/12] doc: add hint on how to calculate in hush   Holger Schurig
• [PATCH 09/12] doc: remove board type from barebox prompt examples   Holger Schurig
• [PATCH 10/12] doc: reformat overly long lines   Holger Schurig
• [PATCH 11/12] doc: move variables near device parameters   Holger Schurig
• [PATCH 12/12] doc: link back from variables to device parameters   Holger Schurig
• Booting barebox on i.MX6 from SDCARD?   Holger Schurig
• where is Documentation/parameters.txt?   Robert P. J. Day
• why is some output placed under "srctree" even if i specify output dir?   Robert P. J. Day
• where is Documentation/parameters.txt?   Holger Schurig
• why is some output placed under "srctree" even if i specify output dir?   Holger Schurig
• why is some output placed under "srctree" even if i specify output dir?   Robert P. J. Day
• [PATCH] Documentation: Fix broken line in download.rst.   Robert P. J. Day
• where is Documentation/parameters.txt?   Sascha Hauer
• [PATCH 0/4] MIPS: XBurst: add gpio support   Sascha Hauer
• [PATCH v2] Support for booting ELF images.   Owen Kirby
• [PATCH 00/12] documentation updates   Sascha Hauer
• [PATCH] Documentation: Fix broken line in download.rst.   Sascha Hauer
• AM335x NAND   Sascha Hauer
• [PATCH] Documentation: Minor editing changes to filesystems content.   Robert P. J. Day
• WRT Synertronixx scb9328, what is "sha"?   Robert P. J. Day
• and what is "i.MX1"?   Robert P. J. Day
• WRT Synertronixx scb9328, what is "sha"?   Robert P. J. Day
• WRT Synertronixx scb9328, what is "sha"?   Lucas Stach
• and what is "i.MX1"?   Robert P. J. Day
• and what is "i.MX1"?   Lucas Stach
• in sphinx docs, what is "@b barebox" markup supposed to do?   Robert P. J. Day
• [PATCH] Documentation/boards/: Numerous grammar/typo/rendering fixes.   Robert P. J. Day
• [PATCH] Documentation: Clean up sandbox.rst, use definition list.   Robert P. J. Day
• [RFC] picotcp.20140628   Antony Pavlov
• [PATCH] Documentation: add mips boards files   Antony Pavlov
• [PATCH] Documentation: add mips boards files   Sascha Hauer
• in sphinx docs, what is "@b barebox" markup supposed to do?   Sascha Hauer
• [PATCH] kconfig: Fix compiler warning   Uwe Kleine-König
• [PATCH] Documentation/boards/: Numerous grammar/typo/rendering fixes.   Sascha Hauer
• [PATCH] Documentation: Clean up sandbox.rst, use definition list.   Sascha Hauer
• [PATCH] imx6: add new chip revisions   Christian Hemp
• [PATCH] Documentation: Minor editing changes to filesystems content.   Sascha Hauer
• [PATCH] imx6: add new chip revisions   Sascha Hauer
• [PATCH] Fix misspellings of "persistant" -> "persistent" in various places   Sascha Hauer
• [PATCH RFC 1/4] usb: add Marvell MVEBU USB support   Sascha Hauer
• doc branch now in -next   Sascha Hauer
• [PATCH RFC 1/4] usb: add Marvell MVEBU USB support   Sebastian Hesselbarth
• [PATCH] regulator: fixed: add always-on property   Steffen Trumtrar
• [PATCH] usb: chipidea: imx: add vbus regulator support   Steffen Trumtrar
• [PATCH] usb: chipidea: imx: add vbus regulator support   Sebastian Hesselbarth
• in sphinx docs, what is "@b barebox" markup supposed to do?   Holger Schurig
• in sphinx docs, what is "@b barebox" markup supposed to do?   Robert P. J. Day
• [RFC v3 1/5] PCI: initial commit   Lucas Stach
• [RFC v3 2/5] commands: add 'lspci' command   Lucas Stach
• [PATCH] boot: show all boot sources   Rolf Evers-Fischer
• [PATCH] Documentation: device tree bindings.   Robert P. J. Day
• [PATCH] Documentation: Fix glossary entry, "FTD" -> "FDT"   Robert P. J. Day
• [PATCH] boot: fix typo   Rolf Evers-Fischer
• [PATCH] sdma.h: Typo, "interupt" -> "interrupt"   Robert P. J. Day
• in sphinx docs, what is "@b barebox" markup supposed to do?   Robert P. J. Day
• in sphinx docs, what is "@b barebox" markup supposed to do?   Sascha Hauer
• [PATCH] Makefile: Add missing closing quote for "make help"   Robert P. J. Day
• AM335x NAND   Jan Lübbe
• [PATCH] Documentation: User manual, "barebox" section   Robert P. J. Day
• recommendation for ARM cross-compiler for building for beaglebone black?   Robert P. J. Day
• [PATCH] Documentation: device tree bindings.   Sascha Hauer
• [PATCH] Documentation: Fix glossary entry, "FTD" -> "FDT"   Sascha Hauer
• [PATCH] sdma.h: Typo, "interupt" -> "interrupt"   Sascha Hauer
• [PATCH] Makefile: Add missing closing quote for "make help"   Sascha Hauer
• [PATCH] Documentation: User manual, "barebox" section   Sascha Hauer
• [PATCH] Documentation: User manual, "barebox" section   Robert P. J. Day
• [PATCH] Documentation: User manual, "barebox" section   Robert P. J. Day
• [RFC v3 2/5] commands: add 'lspci' command   Antony Pavlov
• [PATCH] Support for booting ELF images.   Owen Kirby
• [RFC v4 0/6] barebox PCI support   Antony Pavlov
• [RFC v4 1/6] MIPS: add dma_alloc_coherent()   Antony Pavlov
• [RFC v4 2/6] PCI: initial commit   Antony Pavlov
• [RFC v4 3/6] commands: add 'lspci' command   Antony Pavlov
• [RFC v4 4/6] net: add RealTek RTL-8139 PCI Ethernet driver   Antony Pavlov
• [RFC v4 5/6] MIPS: add PCI support for GT64120-based Malta board   Antony Pavlov
• [RFC v4 6/6] MIPS: qemu-malta_defconfig: enable PCI & network stuff   Antony Pavlov
• recommendation for ARM cross-compiler for building for beaglebone black?   Robert Schwebel
• [PATCH 1/3] arm: imx6: move imx6_init_lowlevel to single initcall   Sascha Hauer
• [PATCH] boot: fix typo   Sascha Hauer
• [PATCH] boot: show all boot sources   Sascha Hauer
• recommendation for ARM cross-compiler for building for beaglebone black?   Holger Schurig

Last message date: Mon Jun 30 23:59:47 PDT 2014
Archived on: Tue Jul 1 00:00:11 PDT 2014

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...