[RFC v3 5/5] MIPS: qemu-malta_defconfig: enable PCI & network stuff

[Antony Pavlov]

qemu usage:

  # ifconfig br0:1 172.20.0.1
  # qemu-system-mips -nodefaults -nographic -M malta -m 256 \
    -serial stdio -monitor null \
    -bios ./barebox-flash-image \
    -net nic,vlan=0,model=rtl8139 \
    -net tap,vlan=0,script=net_br0.sh

  ...

  barebox:/ eth0.ipaddr=172.20.0.2
  barebox:/ eth0.serverip=172.20.0.1
  barebox:/ ping 172.20.0.1
  phy0: Link is up - 100/Full
  host 172.20.0.1 is alive
  barebox:/

Sample net_br0.sh (for connecting to br0 interface, so you can
connect barebox to your real network):

  #!/bin/sh

  brctl addif br0 $1
  ifconfig $1 up

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
 arch/mips/configs/qemu-malta_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/mips/configs/qemu-malta_defconfig b/arch/mips/configs/qemu-malta_defconfig
index 78f175d..4fee70e 100644
--- a/arch/mips/configs/qemu-malta_defconfig
+++ b/arch/mips/configs/qemu-malta_defconfig
@@ -1,5 +1,7 @@
 CONFIG_BUILTIN_DTB=y
 CONFIG_BUILTIN_DTB_NAME="qemu-malta"
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
 CONFIG_PBL_IMAGE=y
 CONFIG_STACK_SIZE=0x7000
 CONFIG_BROKEN=y
@@ -32,6 +34,7 @@ CONFIG_CMD_UNCOMPRESS=y
 CONFIG_CMD_GETOPT=y
 CONFIG_CMD_SLEEP=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_TFTP=y
 CONFIG_CMD_ECHO_E=y
@@ -56,6 +59,7 @@ CONFIG_NET_NETCONSOLE=y
 CONFIG_NET_RESOLV=y
 CONFIG_OFDEVICE=y
 CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_DRIVER_NET_RTL8139=y
 # CONFIG_SPI is not set
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
-- 
1.9.2