[PATCH RFC 2/4] ARM: dts: add new USB nodes to Kirkwood Guruplug

[Sebastian Hesselbarth]

Add new MVEBU usb controller nodes to Guruplug dts overlay to show
how it should be included upstream.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: barebox at lists.infradead.org
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 arch/arm/dts/kirkwood-guruplug-server-plus-bb.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/dts/kirkwood-guruplug-server-plus-bb.dts b/arch/arm/dts/kirkwood-guruplug-server-plus-bb.dts
index aba7c06160d0..eaf9869e9483 100644
--- a/arch/arm/dts/kirkwood-guruplug-server-plus-bb.dts
+++ b/arch/arm/dts/kirkwood-guruplug-server-plus-bb.dts
@@ -11,4 +11,24 @@
 			barebox,default-trigger = "heartbeat";
 		};
 	};
+
+	ocp at f1000000 {
+		musb0: usb at 50000 {
+			compatible = "marvell,mvebu-usb";
+			reg = <0x50000 0x400>;
+			interrupts = <19>;
+			clocks = <&gate_clk 3>;
+			usb-phy = <&usb_phy0>;
+			dr_mode = "host";
+			status = "okay";
+		};
+
+		usb_phy0: phy at 50400 {
+			compatible = "marvell,mvebu-usb-phy-65nm";
+			reg = <0x50400 0x100>;
+			clocks = <&gate_clk 3>;
+			#phy-cells = <0>;
+			status = "okay";
+		};
+	};
 };
-- 
2.0.0