[PATCH] Documentation: device tree bindings.

[Sascha Hauer]

On Mon, Jun 30, 2014 at 08:23:43AM -0400, Robert P. J. Day wrote:
> 
> Adjusted Sphinx markup for devicetree bindings pages.
> 
> Signed-off-by: Robert P. J. Day <rpjday at crashcourse.ca>
> 
> ---
> 
>   not completely confident in my markup here so i'm open to
> suggestions.

Looks fine in the source code, so applied.

I'll have a look at the rendered html result tomorrow.

Sascha


> 
> diff --git a/Documentation/devicetree/bindings/barebox/barebox,environment.rst b/Documentation/devicetree/bindings/barebox/barebox,environment.rst
> index d243484..d472f66 100644
> --- a/Documentation/devicetree/bindings/barebox/barebox,environment.rst
> +++ b/Documentation/devicetree/bindings/barebox/barebox,environment.rst
> @@ -4,18 +4,19 @@ barebox environment
>  This driver provides an environment for barebox from the devicetree.
> 
>  Required properties:
> -- compatible: should be "barebox,environment"
> -- device-path: path to the environment
> +
> +* ``compatible``: should be ``barebox,environment``
> +* ``device-path``: path to the environment
> 
>  The device-path is a multistring property. The first string should be a
>  nodepath to the node containing the physical device of the environment.
>  The subsequent strings are of the form <type>:<options> to further describe
>  the path to the environment. Supported values for <type>:
> 
> -partname:<partname>  This describes a partition on a device. <partname> can
> -                     be the label for mtd partitions, the number for DOS
> -		     partitions (beginning with 0) or the name for GPT
> -		     partitions
> +``partname``:<partname>
> +  This describes a partition on a device. <partname> can
> +  be the label for MTD partitions, the number for DOS
> +  partitions (beginning with 0) or the name for GPT partitions.
> 
>  Example::
> 
> diff --git a/Documentation/devicetree/bindings/leds/common.rst b/Documentation/devicetree/bindings/leds/common.rst
> index 63a45bd..c1fd1ab 100644
> --- a/Documentation/devicetree/bindings/leds/common.rst
> +++ b/Documentation/devicetree/bindings/leds/common.rst
> @@ -1,9 +1,10 @@
>  Common leds properties
>  ======================
> 
> -- linux,default-trigger barebox,default-trigger:  This parameter, if present, is a
> +* ``linux,default-trigger``, ``barebox,default-trigger``:  This parameter, if present, is a
>      string defining the trigger assigned to the LED.  Current triggers are:
> -     "heartbeat" - LED flashes at a constant rate
> -     "panic" - LED turns on when barebox panics
> -     "net" - LED indicates network activity
> +
> +    * ``heartbeat`` - LED flashes at a constant rate
> +    * ``panic`` - LED turns on when barebox panics
> +    * ``net`` - LED indicates network activity
> 
> diff --git a/Documentation/devicetree/bindings/misc/fsl,imx-iim.rst b/Documentation/devicetree/bindings/misc/fsl,imx-iim.rst
> index a067579..b9d5bcb 100644
> --- a/Documentation/devicetree/bindings/misc/fsl,imx-iim.rst
> +++ b/Documentation/devicetree/bindings/misc/fsl,imx-iim.rst
> @@ -3,14 +3,14 @@ Freescale i.MX IIM (Ic Identification Module)
> 
>  Required properties:
> 
> -- compatible: fsl,imx27-iim
> -- reg: physical register base and size
> +* ``compatible``: ``fsl,imx27-iim``, ``fsl,imx51-iim``
> +* ``reg``: physical register base and size
> 
>  Optional properties:
> 
> -- barebox,provide-mac-address: Provide MAC addresses for ethernet devices. This
> -  can be multiple entries in the form <&phandle bankno fuseofs> to specify a MAC
> -  address to a ethernet device.
> +* ``barebox,provide-mac-address``: Provide MAC addresses for Ethernet devices. This
> +  can be multiple entries in the form <&phandle bankno fuseofs> to assign a MAC
> +  address to an Ethernet device.
> 
>  Example::
> 
> diff --git a/Documentation/devicetree/bindings/misc/fsl,imx-ocotp.rst b/Documentation/devicetree/bindings/misc/fsl,imx-ocotp.rst
> index 472b9e2..403863e 100644
> --- a/Documentation/devicetree/bindings/misc/fsl,imx-ocotp.rst
> +++ b/Documentation/devicetree/bindings/misc/fsl,imx-ocotp.rst
> @@ -3,14 +3,14 @@ Freescale i.MX OCOTP (On-Chip OTP)
> 
>  Required properties:
> 
> -- compatible: fsl,imx6q-ocotp
> -- reg: physical register base and size
> +* ``compatible``: ``fsl,imx6q-ocotp``
> +* ``reg``: physical register base and size
> 
>  Optional properties:
> 
> -- barebox,provide-mac-address: Provide MAC addresses for ethernet devices. This
> -  can be multiple entries in the form <&phandle regofs> to specify a MAC
> -  address to a ethernet device.
> +* ``barebox,provide-mac-address``: Provide MAC addresses for Ethernet devices. This
> +  can be multiple entries in the form <&phandle regofs> to assign a MAC
> +  address to an Ethernet device.
> 
>  Example::
> 
> 
> -- 
> 
> ========================================================================
> Robert P. J. Day                                 Ottawa, Ontario, CANADA
>                         http://crashcourse.ca
> 
> Twitter:                                       http://twitter.com/rpjday
> LinkedIn:                               http://ca.linkedin.com/in/rpjday
> ========================================================================
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |