[PATCH 0/4] Orion GBE fixes and Marvell PHY driver

[Sascha Hauer]

On Tue, Jun 24, 2014 at 12:18:07PM +0200, Sebastian Hesselbarth wrote:
> This patch set comprises some fixes and improvements related with ethernet
> support on Marvell Orion SoC based boards.
> 
> Patch 1 adds a check for ePAPR standard "phy-connection-type" property to
> of_get_phy_mode.
> 
> Patch 2 resolves a device name conflict on orion-gbe port names when using
> more than one controller instance.
> 
> Patch 3 extends ethernet serial port setup to also check for delayed RGMII
> interface modes.
> 
> Patch 4 finally adds a driver for Marvell PHYs with 88E1121R as a first
> PHY driver.
> 
> The patches have been tested on Globalscale Guruplug. For ethernet, the
> board needs a DT fix that has been picked up for Linux v3.16-rc yesterday
> and should be available in barebox soon. For the second ethernet port,
> barebox is still missing pinctrl for Kirkwood, but that is next on my
> "polish private branches for submission"-TODO list.
> 
> Sebastian Hesselbarth (4):
>   of: net: respect phy-connection-type property
>   net: orion: generate unique port device names
>   net: orion-gbe: extend RGMII detection to delayed modes
>   net: phy: add support for Marvell PHY drivers

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |