October 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Oct 1 02:22:03 PDT 2021
Ending: Sat Oct 30 10:59:26 PDT 2021
Messages: 246

• [PATCH] pbl/Kconfig: fix typo "inflluences" -> "influences"   Sascha Hauer
• [PATCH v=2] serial: implement riscv SBI console support   Sascha Hauer
• [PATCH v2 0/8] ARM: i.MX8M: add nano support   Ahmad Fatoum
  • [PATCH v2 1/8] ARM: i.MX: add i.MX8MN (Nano) SoC support boilerplate   Ahmad Fatoum
  • [PATCH v2 2/8] clk: imx: add i.MX8MN (Nano) support   Ahmad Fatoum
  • [PATCH v2 3/8] ARM: i.MX8MN: adapt early clock support   Ahmad Fatoum
  • [PATCH v2 5/8] ddr: imx8m: add i.MX8MN (Nano) support   Ahmad Fatoum
  • [PATCH v2 6/8] ddr: imx8m: ddrphy_train: add DDR4 support   Ahmad Fatoum
  • [PATCH v2 7/8] scripts: imx: add i.MX8MN support to imx-image   Ahmad Fatoum
  • [PATCH v2 8/8] ARM: i.MX8MN: add i.MX8MN-EVK support   Ahmad Fatoum
  • [PATCH v2 0/8] ARM: i.MX8M: add nano support   Sascha Hauer
• [PATCH v2 4/8] ARM: i.MX: extend drivers for i.MX8MN (Nano) support   Ahmad Fatoum
• [PATCH RESEND v4 1/8] clocksource: timer-riscv: select CSR from device tree   Ahmad Fatoum
• [PATCH RESEND v4 4/8] gpio: add driver for 74xx-ICs with MMIO access   Ahmad Fatoum
• [PATCH RESEND v4 5/8] spi: add litex spiflash driver   Ahmad Fatoum
• [PATCH RESEND v4 6/8] net: add LiteEth driver   Ahmad Fatoum
• [PATCH RESEND v4 8/8] RISC-V: add litex_linux_defconfig   Ahmad Fatoum
• [PATCH RESEND v4 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support   Ahmad Fatoum
• 'of_compatible' and 'model' imd records are unusable   Antony Pavlov
  • 'of_compatible' and 'model' imd records are unusable   Antony Pavlov
  • 'of_compatible' and 'model' imd records are unusable   Sascha Hauer
    • 'of_compatible' and 'model' imd records are unusable   Antony Pavlov
      • 'of_compatible' and 'model' imd records are unusable   Sascha Hauer
• [PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM   Sascha Hauer
• [PATCH v2 1/1] kbuild: dtc: Allow adding device tree fragments via config   Sascha Hauer
• [PATCH v2] Documentation: reboot-mode: add note about /env/bmode   Sascha Hauer
• [PATCH master] power: reset: nvmem-reboot-mode: disable device tree fixup   Sascha Hauer
• [PATCH master 1/2] startup: don't read glob_t if glob("/env/init/*") fails   Sascha Hauer
• [PATCH 0/5] ARM: at91: sama5d3_xplained: migrate to DT   Sascha Hauer
• [PATCH v3 3/7] ARM: boards: skov-imx6: add switch detection   Sascha Hauer
• [PATCH 1/2] pinctrl: bcm2835: Probe driver earlier   Sascha Hauer
• [PATCH v3] ARM: document arm_setup_stack() pitfalls   Sascha Hauer
• [PATCH v2 1/4] common: remove !SANDBOX dependency for target tools   Sascha Hauer
• [PATCH 1/2] mci-bcm2835: Don't block infinitely while waiting for a command completion   Sascha Hauer
• [PATCH master] virtio: implement remove callbacks   Sascha Hauer
• [PATCH] arm64: Don't truncate upper 32 bits in ENTRY_FUNCTION arg registers   Sascha Hauer
• [PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function   Sascha Hauer
• [PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option   Sascha Hauer
• [PATCH] mci: Improve error message for non-existent vmmc regulator   Sascha Hauer
• [PATCH v1] net: dhcp: send current hostname as part of the DHCP request   Sascha Hauer
• [PATCH v1] net: dhcp: set default DHCP vendor ID to "barebox"   Sascha Hauer
• [PATCH master v2] base: driver: fix double removal of child devices   Sascha Hauer
• [PATCH] net: add virtio network driver   Sascha Hauer
• [PATCH] fixup! console: add new CONFIG_CONSOLE_DISABLE_INPUT option   Ahmad Fatoum
• [PATCH] debug_ll: ns16550: Fix interrupt disable on init   Jules Maselbas
• [PATCH] mtd: core: fix whitespaces   Antony Pavlov
  • [PATCH] mtd: core: fix whitespaces   Sascha Hauer
• [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources   Sascha Hauer
• [PATCH 1/2 v2] usb: dwc2: Make having a phy optional   Sascha Hauer
  • [PATCH 1/2 v2] usb: dwc2: Make having a phy optional   Jules Maselbas
    • [PATCH 1/2 v2] usb: dwc2: Make having a phy optional   Daniel Brát
      • [PATCH 1/2 v2] usb: dwc2: Make having a phy optional   Jules Maselbas
• [PATCH] common: Select CRC32 dependency for DEFAULT_ENVIRONMENT   Sascha Hauer
• [PATCH] Documentation: Typo fix in command example   Sascha Hauer
• [PATCH] fs: remove unused struct fs_device_d::parent_device   Sascha Hauer
• [PATCH master] blspec: fix use-after-free of firmware search path   Sascha Hauer
• [PATCH] video: Fix broken bcm2835 fb driver   Sascha Hauer
• [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP   Sascha Hauer
  • [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP   Ahmad Fatoum
    • [PATCH v2 2/3] mci: imx-esdhc-pbl: support eMMC boot partitions on i.MX8MP   Sascha Hauer
• [PATCH v2] mci: sdhci: fix big-endian write for blockcount/size   Sascha Hauer
• [PATCH] net: cpsw: fix ethernet bringup in case of a fixed-link phy   Sascha Hauer
• [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards   Sascha Hauer
  • [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards   Ahmad Fatoum
• [PATCH master] of: overlay: don't do fixups on empty global.of.overlay.dir   Sascha Hauer
• [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget   Sascha Hauer
  • [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget   Jules Maselbas
    • [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget   Sascha Hauer
• [PATCH] state: backend_raw: fix ignoring unpack failures   Sascha Hauer
• [PATCH v1 0/6] protonic: maintaining and new board   Sascha Hauer
• [PATCH] Documentation: framebuffer: remove note about lack of backlight support   Sascha Hauer
• [PATCH v2] usb: imx-us-phy: add vbus_valid ro parameter   Sascha Hauer
• [PATCH] net: eqos: let phy_resume handle fixed link phys   Sascha Hauer
• [PATCH 1/2] video: simplefb-client: populate video mode field   Sascha Hauer
• [PATCH RESEND v4 0/8] RISC-V: add LiteX SoC support   Sascha Hauer
• [PATCH] ARM: i.MX8MP: move SCTR enabling into imx8mp_cpu_lowlevel_init   Sascha Hauer
• [PATCH] RISC-V: virt: support poweroff/restart on tinyemu   Sascha Hauer
• [PATCH] ARM: at91: sama5d27_som1_ek: populate MAC address from EEPROM   Sascha Hauer
• [PATCH] kbuild: force 16-bit wchar_t treewide   Ahmad Fatoum
  • [PATCH] kbuild: force 16-bit wchar_t treewide   Ahmad Fatoum
• [PATCH] commands: smc: disable -c (start cpu) test option for ARMv8   Ahmad Fatoum
  • [PATCH] commands: smc: disable -c (start cpu) test option for ARMv8   Sascha Hauer
• [PATCH v4 0/8] add noswitch support for skov boards   Oleksij Rempel
  • [PATCH v4 8/8] ARM: boards: skov-imx6: use separate DTS for the iMX6 Solo variant   Oleksij Rempel
  • [PATCH v4 0/8] add noswitch support for skov boards   Sascha Hauer
• [PATCH v4 1/8] ARM: dts: skov-imx6: add USB nodes   Oleksij Rempel
• [PATCH v4 2/8] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node   Oleksij Rempel
• [PATCH v4 3/8] ARM: boards: skov-imx6: add switch detection   Oleksij Rempel
• [PATCH v4 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected   Oleksij Rempel
• [PATCH v4 5/8] ARM: boards: skov-imx6: fixup different DTS variants   Oleksij Rempel
• [PATCH v4 6/8] ARM: boards: skov-imx6: start using deep-probe   Oleksij Rempel
• [PATCH v4 7/8] ARM: boards: skov-imx6: add defaultenv with eth1-discover script   Oleksij Rempel
• inkscape 1.1.1 issue   Antony Pavlov
  • inkscape 1.1.1 issue   Ahmad Fatoum
    • inkscape 1.1.1 issue   Ian Abbott
    • inkscape 1.1.1 issue   Jules Maselbas
      • inkscape 1.1.1 issue   Ahmad Fatoum
  • [RFC PATCH] logo: Makefile: Replace inkscape with convert   Jules Maselbas
    • [RFC PATCH] logo: Makefile: Replace inkscape with convert   Ian Abbott
    • [RFC PATCH] logo: Makefile: Replace inkscape with convert   Sascha Hauer
• [PATCH 0/5] scripts: Common functions for host tools and rk-usb-loader   Sascha Hauer
  • [PATCH 1/5] scripts: Add Kconfig option for most host tools   Sascha Hauer
  • [PATCH 2/5] scripts: Add common library functions   Sascha Hauer
    • [PATCH 2/5] scripts: Add common library functions   Masahiro Yamada
      • [PATCH 2/5] scripts: Add common library functions   Sascha Hauer
      • [PATCH 2/5] scripts: Add common library functions   Masahiro Yamada
  • [PATCH 4/5] scripts/common: Add write_full() and read_full()   Sascha Hauer
  • [PATCH 5/5] scripts: Add rk-usb-loader tool   Sascha Hauer
    • [PATCH 5/5] scripts: Add rk-usb-loader tool   Michael Riesch
      • [PATCH 5/5] scripts: Add rk-usb-loader tool   Sascha Hauer
      • [PATCH 5/5] scripts: Add rk-usb-loader tool   Michael Riesch
• [PATCH 3/5] scripts/common: Add write_file()   Sascha Hauer
• [PATCH] Documentation/boards/riscv.rst: fix code blocks   Antony Pavlov
• v2021.10.0   Sascha Hauer
• yocto integration - best practice   Konstantin Kletschke
  • yocto integration - best practice   Sascha Hauer
    • yocto integration - best practice   Enrico Jörns
• [PATCH] devfs: Do not create overlapping partitions   Sascha Hauer
• [PATCH 0/9] RK3568 updates   Sascha Hauer
  • [PATCH 1/9] phy: rockchip: Add dummy driver for child node   Sascha Hauer
  • [PATCH 2/9] ARM: Rockchip rk3568 EVB: Enable deep probe   Sascha Hauer
  • [PATCH 3/9] ARM: Rockchip: rk3568 EVB: use 64bit partition sizes   Sascha Hauer
  • [PATCH 4/9] phy: rockchip-inno-usb2: handle disabled child nodes gracefully   Sascha Hauer
  • [PATCH 5/9] usb: dwc3: reset controller before using it   Sascha Hauer
  • [PATCH 6/9] usb: dwc3: Clarify error message   Sascha Hauer
    • [PATCH 6/9] usb: dwc3: Clarify error message   Trent Piepho
      • [PATCH 6/9] usb: dwc3: Clarify error message   Sascha Hauer
  • [PATCH 7/9] ARM: rk3568: Detect USB boot   Sascha Hauer
    • [PATCH 7/9] ARM: rk3568: Detect USB boot   Trent Piepho
      • [PATCH 7/9] ARM: rk3568: Detect USB boot   Sascha Hauer
  • [PATCH 8/9] cdev: Add function to get unallocated start of device   Sascha Hauer
  • [PATCH 9/9] ARM: Rockchip: RK3568: implement failsafe barebox update   Sascha Hauer
    • [PATCH 9/9] ARM: Rockchip: RK3568: implement failsafe barebox update   Michael Riesch
• [PATCH] ARM: Rockchip: fix path to rkbin firmware in documentation   Ahmad Fatoum
  • [PATCH] ARM: Rockchip: fix path to rkbin firmware in documentation   Sascha Hauer
• [PATCH 1/2] fixup! scripts: Add rk-usb-loader tool   Ahmad Fatoum
  • [PATCH 2/2] scripts: add target tool for rk-usb-loader   Ahmad Fatoum
  • [PATCH 1/2] fixup! scripts: Add rk-usb-loader tool   Sascha Hauer
• [PATCH] net: ksz8864: Add support for KSZ87xx switches   Trent Piepho
  • [PATCH] net: ksz8864: Add support for KSZ87xx switches   Sascha Hauer
• [PATCH] nandtest: Add more fields when bad byte found   Trent Piepho
  • [PATCH] nandtest: Add more fields when bad byte found   Sascha Hauer
• [PATCH] of: partitions: Skip fixup for devices with no partitions   Trent Piepho
  • [PATCH] of: partitions: Skip fixup for devices with no partitions   Sascha Hauer
• [PATCH 1/3] imx-bbu-nand-fcb: Show additional information from decoded FCB   Trent Piepho
  • [PATCH 2/3] imx-bbu-nand-fcb: Save bootloader location into device parameters   Trent Piepho
    • [PATCH 2/3] imx-bbu-nand-fcb: Save bootloader location into device parameters   Sascha Hauer
  • [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues   Trent Piepho
    • [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues   Sascha Hauer
      • [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues   Trent Piepho
      • [PATCH 3/3] imx-bbu-nand-fcb: Add command to help debug FCB issues   Sascha Hauer
• [PATCH v2 0/8] RK3568 updates   Sascha Hauer
  • [PATCH 3/8] ARM: Rockchip: rk3568 EVB: use 64bit partition sizes   Sascha Hauer
  • [PATCH 4/8] phy: rockchip-inno-usb2: handle disabled child nodes gracefully   Sascha Hauer
  • [PATCH 8/8] ARM: Rockchip: RK3568: implement failsafe barebox update   Sascha Hauer
• [PATCH 1/8] phy: rockchip: Add dummy driver for child node   Sascha Hauer
• [PATCH 2/8] ARM: Rockchip rk3568 EVB: Enable deep probe   Sascha Hauer
• [PATCH 5/8] usb: dwc3: reset controller before using it   Sascha Hauer
• [PATCH 6/8] ARM: rk3568: Detect USB boot   Sascha Hauer
• [PATCH 7/8] cdev: Add function to get unallocated start of device   Sascha Hauer
  • [PATCH 7/8] cdev: Add function to get unallocated start of device   Ahmad Fatoum
    • [PATCH 7/8] cdev: Add function to get unallocated start of device   Sascha Hauer
• [PATCH 1/2] common: Kconfig: fix typos   Ulrich Ölmann
  • [PATCH 1/2] common: Kconfig: fix typos   Sascha Hauer
• [PATCH 2/2] common: Kconfig: fix indentation   Ulrich Ölmann
• [PATCH v1 1/2] include/phy: add driver_data to resume more of kernel code   Oleksij Rempel
  • [PATCH v1 2/2] net: phy: micrel: port clock select support   Oleksij Rempel
    • [PATCH v1 2/2] net: phy: micrel: port clock select support   Trent Piepho
      • [PATCH v1 2/2] net: phy: micrel: port clock select support   Oleksij Rempel
      • [PATCH v1 2/2] net: phy: micrel: port clock select support   Trent Piepho
      • [PATCH v1 2/2] net: phy: micrel: port clock select support   Oleksij Rempel
      • [PATCH v1 2/2] net: phy: micrel: port clock select support   Trent Piepho
      • [PATCH v1 2/2] net: phy: micrel: port clock select support   Oleksij Rempel
• [PATCH v2 1/2] include/phy: add driver_data to resume more of kernel code   Oleksij Rempel
  • [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Oleksij Rempel
    • [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Trent Piepho
      • [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Oleksij Rempel
      • [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Trent Piepho
      • [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Oleksij Rempel
      • [PATCH v2 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Sascha Hauer
• [PATCH v2 0/1] gpio: add driver for xilinx zynq and zynqmp   Michael Riesch
  • [PATCH v2 1/1] gpio: add driver for xilinx zynq and zynqmp   Michael Riesch
  • [PATCH v2 0/1] gpio: add driver for xilinx zynq and zynqmp   Sascha Hauer
• [PATCH v3 1/2] include/phy: add driver_data to resume more of kernel code   Oleksij Rempel
  • [PATCH v3 2/2] net: phy: micrel: sync init code for ksz80xx variants with the kernel driver   Oleksij Rempel
• [PATCH v2 0/3] Support usb booting on i.MX8MP   Ahmad Fatoum
• [PATCH master] ARM: psci: client: fix power off and reset via 64-bit secure monitor   Ahmad Fatoum
  • [PATCH master] ARM: psci: client: fix power off and reset via 64-bit secure monitor   Sascha Hauer
• [PATCH v1 1/1] usb: net: Add support for the Realtek RTL8152B/RTL8153   Oleksij Rempel
  • [PATCH v1 1/1] usb: net: Add support for the Realtek RTL8152B/RTL8153   Trent Piepho
    • [PATCH v1 1/1] usb: net: Add support for the Realtek RTL8152B/RTL8153   Oleksij Rempel
• [PATCH v2] usb: net: Add support for the Realtek RTL8152B/RTL8153   Oleksij Rempel
  • [PATCH v2] usb: net: Add support for the Realtek RTL8152B/RTL8153   Ahmad Fatoum
    • [PATCH v2] usb: net: Add support for the Realtek RTL8152B/RTL8153   Oleksij Rempel
• [PATCH v2] ARM: rpi_defconfig: Enable PHY core for dwc2 USB driver   Daniel Brát
  • [PATCH v2] ARM: rpi_defconfig: Enable PHY core for dwc2 USB driver   Sascha Hauer
• [PATCH] phy: core: Make 'phy_optional_get' return NULL when not implemented   Daniel Brát
• [PATCH v3] usb: net: Add support for the Realtek RTL8152B/RTL8153   Oleksij Rempel
  • [PATCH v3] usb: net: Add support for the Realtek RTL8152B/RTL8153   Sascha Hauer
• [PATCH] Documentation: reboot-mode: fix typos   Ulrich Ölmann
  • [PATCH] Documentation: reboot-mode: fix typos   Sascha Hauer
• [PATCH v2 1/3] imx8mp-evk: Add support for booting via USB   Ahmad Fatoum
• [PATCH] fixup! scripts: Add common library functions   Ahmad Fatoum
• [PATCH v2 2/3] imx-usb-loader: Drop nearly unused struct usb_id   Ahmad Fatoum
• [PATCH v2 3/3] imx-usb-loader: Add support for i.MX8MP   Ahmad Fatoum
• [PATCH 0/4] imd fixes   Antony Pavlov
  • [PATCH 1/4] imd: fix imd_is_crc32()   Antony Pavlov
  • [PATCH 2/4] imd: reuse imd_is_crc32()   Antony Pavlov
  • [PATCH 3/4] include/image-metadata.h: fix whitespaces in the BAREBOX_IMD_CRC macro   Antony Pavlov
  • [PATCH 4/4] bareboximd: make the '-c' option work again   Antony Pavlov
    • [PATCH 4/4] bareboximd: make the '-c' option work again   Ahmad Fatoum
      • [PATCH 4/4] bareboximd: make the '-c' option work again   Antony Pavlov
• [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size   Joacim Zetterling
  • [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size   Ahmad Fatoum
    • [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size   Joacim Zetterling
      • [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size   Ahmad Fatoum
      • [PATCH] ARM: imx: Fix problem with imx_ddrc_sdram_size   Joacim Zetterling
• [PATCH v2] ARM: imx: Fix problem with imx_ddrc_sdram_size   Joacim Zetterling
  • [PATCH v2] ARM: imx: Fix problem with imx_ddrc_sdram_size   Ahmad Fatoum
• [PATCH] fs: ramfs: drop free of unused dev->priv   Ahmad Fatoum
• [PATCH 1/5] include: <linux/bitops.h>: discard left-over hweight code   Ahmad Fatoum
  • [PATCH 2/5] scripts: <linux/bitops.h>: fix references to undefined __BITS_PER_LONG   Ahmad Fatoum
  • [PATCH 3/5] include: add dedicated header for printf/printk   Ahmad Fatoum
  • [PATCH 4/5] include: <asm-generic/bug.h>: make self-contained   Ahmad Fatoum
  • [PATCH 5/5] include: move ARRAY_AND_SIZE to <linux/kernel.h>   Ahmad Fatoum
• [PATCH master] ARM: i.MX8M: nxp-imx8mn-evk: use regular i2c read for device detection   Ahmad Fatoum
• [PATCH] I2C: i.MX: early: replace zero-valued variable use with zero directly   Ahmad Fatoum
• [PATCH 1/4] misc: acpi-test: bump down debug message on remove   Ahmad Fatoum
  • [PATCH 2/4] usb: dwc3: remove unneeded EPROBE_DEFER check   Ahmad Fatoum
• [PATCH 3/4] serial: atmel: abort probe on atmel_serial_init_port failure   Ahmad Fatoum
• [PATCH 4/4] spi: zynq_qspi: don't check clk_get return value for NULLness   Ahmad Fatoum
• [PATCH 1/4] drivers: caam: remove license text covered by SPDX-License-Identifier   Ahmad Fatoum
  • [PATCH 2/4] hw_random: mxc-rngc: switch to SPDX-License-Identifier   Ahmad Fatoum
  • [PATCH 3/4] i2c: algo-bit: switch to SPDX-License-Identifier   Ahmad Fatoum
  • [PATCH 4/4] drivers: add missing SPDX-License-Identifier   Ahmad Fatoum
• [PATCH 0/9] COMPILE_TEST: fix misc issues   Ahmad Fatoum
  • [PATCH 1/9] ARM: Rockchip: move ARCH_RK3568_OPTEE into ARCH_ROCKCHIP menu   Ahmad Fatoum
  • [PATCH 2/9] ARM: i.MX: guf-santaro: fix passing around of uninitialized variable   Ahmad Fatoum
  • [PATCH 3/9] regulator: fix bitrotted EXPORT_SYMBOL_GPL   Ahmad Fatoum
  • [PATCH 4/9] aiodev: fix bitrotted EXPORT_SYMBOL   Ahmad Fatoum
  • [PATCH 5/9] mtd: remove NULLness check for IOMEM()   Ahmad Fatoum
  • [PATCH 6/9] clocksource: clint: restrict to RISC-V   Ahmad Fatoum
  • [PATCH 7/9] ddr: fsl: make ARCH_LAYERSCAPE only   Ahmad Fatoum
  • [PATCH 8/9] reset: socfpga: error out on failure to request memory   Ahmad Fatoum
  • [PATCH 9/9] i2c-mux-pca954x: drop duplicate warning message on probe   Ahmad Fatoum
• [PATCH] driver: implement dev_err_probe()   Ahmad Fatoum

Last message date: Sat Oct 30 10:59:26 PDT 2021
Archived on: Sat Oct 30 10:59:32 PDT 2021

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...