[PATCH v4 0/8] add noswitch support for skov boards

[Oleksij Rempel]

changes v4:
- rename skov_no_switch to skov_have_switch
- use xasprintf instead of xzallox + snprintf
- use alias for ethernet0 node detection and make it compatible with the
  old DTs versions.

changes v3:
- add missing byte in the switch path generation
- make sure it work with old devicetrees

Oleksij Rempel (8):
  ARM: dts: skov-imx6: add USB nodes
  ARM: boards: skov-imx6: fixup_machine_compatible() add optional root
    node
  ARM: boards: skov-imx6: add switch detection
  ARM: boards: skov-imx6: disable eth0 for barebox if no switch is
    detected
  ARM: boards: skov-imx6: fixup different DTS variants
  ARM: boards: skov-imx6: start using deep-probe
  ARM: boards: skov-imx6: add defaultenv with eth1-discover script
  ARM: boards: skov-imx6: use separate DTS for the iMX6 Solo variant

 arch/arm/boards/skov-imx6/Makefile            |   1 +
 arch/arm/boards/skov-imx6/board.c             | 228 +++++++++++++++---
 .../network/eth1-discover                     |   8 +
 arch/arm/boards/skov-imx6/lowlevel.c          |   6 +-
 arch/arm/dts/Makefile                         |   2 +-
 arch/arm/dts/imx6qdl-skov-imx6.dtsi           |  20 ++
 arch/arm/dts/imx6s-skov-imx6.dts              |  22 ++
 7 files changed, 253 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm/boards/skov-imx6/defaultenv-skov-imx6/network/eth1-discover
 create mode 100644 arch/arm/dts/imx6s-skov-imx6.dts

-- 
2.30.2