[PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources

[Sascha Hauer]

On Mon, Sep 13, 2021 at 02:13:47PM +0200, Michael Riesch wrote:
> Hi all,
> 
> This series features some mixed additions to and improvements of
> the Xilinx Zynq UltraScale+ MPSoC support in barebox.
> 
> The first patch introduces support for the Xilinx Zynq UltraScale+
> MPSoC ZCU106 evaluation board (based on the board support for the
> ZCU104). Tested the basic features (SD card, Ethernet, ...) on a
> ZCU106 board (well, obviously...).
> 
> The second patch fixes two links in the Zynq UltraScale+ part
> of the documentation.
> 
> Finally, the third patch introduces support for the boot source
> detection on the Zynq UltraScale+ architecture in general. Tested
> on the ZCU106 and a custom Zynq UltraScale+ board.
> 
> Version 2 of this patch considers the reviews by Michael Tretter
> and Ahmad Fatoum. Now boot source and instance are set in the
> zynqmp_init method and the boot source/instance determination has
> been revised for better readability.
> 
> Best regards,
> Michael
> 
> Michael Riesch (3):
>   arm: zynqmp: add support for xilinx zcu106 board
>   Documentation: boards: zynqmp: fix broken links
>   arm: zynqmp: add boot source support

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |