October 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Oct 1 00:29:59 EDT 2010
Ending: Fri Oct 29 15:36:26 EDT 2010
Messages: 403

• [PATCH 1/2] imx: Internal boot sources, handle all header offsets   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] imx: Internal boot sources, handle all header offsets   Marc Reilly
    • [PATCH 1/2] imx: Internal boot sources, handle all header offsets   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/2] imx: Internal boot sources, handle all header offsets   Marc Reilly
• [PATCH v2] i2c-imx: wait for STOP before disabling controller   Marc Reilly
• [PATCH v3] MAKEALL: make it generic   Sascha Hauer
  • [PATCH v3] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] imx35: add base addresses for I2C and SDHC   Robert Schwebel
  • [PATCH] imx35: add base addresses for I2C and SDHC   Marc Reilly
    • [PATCH] imx35: add base addresses for I2C and SDHC   Sascha Hauer
• Failing to load Barebox Environment   Gaurav Singh
• [PATCH v4] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• m68k pull request   Jean-Christophe PLAGNIOL-VILLARD
• v2010.10.0   Sascha Hauer
• [PATCH] imx: fix Internal boot source default choice   Jean-Christophe PLAGNIOL-VILLARD
• Cheap online Marketing,Purchase Now   Mr, Kim
• SD/MMC driver for imx   Marc Reilly
  • SD/MMC driver for imx   Juergen Beisert
• Code "borrowed" without attribution to original authors   Wolfgang Denk
  • Code "borrowed" without attribution to original authors   Jean-Christophe PLAGNIOL-VILLARD
    • Code "borrowed" without attribution to original authors   Jean-Christophe PLAGNIOL-VILLARD
      • Code "borrowed" without attribution to original authors   Wolfgang Denk
      • Code "borrowed" without attribution to original authors   Jean-Christophe PLAGNIOL-VILLARD
  • Code "borrowed" without attribution to original authors   Sascha Hauer
    • Code "borrowed" without attribution to original authors   Wolfgang Denk
      • Code "borrowed" without attribution to original authors   Uwe Kleine-König
      • Code "borrowed" without attribution to original authors   Wolfgang Denk
      • Code "borrowed" without attribution to original authors   Uwe Kleine-König
      • Code "borrowed" without attribution to original authors   Sascha Hauer
      • Code "borrowed" without attribution to original authors   Wolfgang Denk
      • Code "borrowed" without attribution to original authors   Sascha Hauer
• No subject  
• [RFC] Add MMC support to barebox   Juergen Beisert
  • [PATCH 1/3] Add MMC support to barebox   Juergen Beisert
  • [PATCH 2/3] Add i.MX23 MCI card support   Juergen Beisert
  • [PATCH 3/3] Add S3C2440 MCI card support   Juergen Beisert
    • [PATCH 3/3] Add S3C2440 MCI card support   Belisko Marek
  • [RFC] Add MMC support to barebox   Juergen Beisert
• [RFC] Add MCI card support to barebox   Juergen Beisert
  • [PATCH 1/7] x-functions do not return in case of failure.   Juergen Beisert
  • [PATCH 2/7] Make the disk driver less noisy   Juergen Beisert
  • [PATCH 3/7] Don't use a sector buffer on stack   Juergen Beisert
  • [PATCH 4/7] Don't try to guess the size of a disk if its size value is already given   Juergen Beisert
  • [PATCH 5/7] Add MCI card support to barebox   Juergen Beisert
    • [PATCH 5/7] Add MCI card support to barebox   Sascha Hauer
      • [PATCH 5/7] Add MCI card support to barebox   Juergen Beisert
      • [PATCH 5/7] Add MCI card support to barebox   Sascha Hauer
      • [PATCH 5/7] Add MCI card support to barebox   Juergen Beisert
  • [PATCH 6/7] Add i.MX23 MCI card support   Juergen Beisert
  • [PATCH 7/7] Add S3C2440 MCI card support   Juergen Beisert
    • [PATCH 7/7] Add S3C2440 MCI card support   Sascha Hauer
      • [PATCH 7/7] Add S3C2440 MCI card support   Juergen Beisert
  • [RFC] Add MCI card support to barebox   Jean-Christophe PLAGNIOL-VILLARD
• Add the i.MX23/i.MX28 architecure   Juergen Beisert
  • [PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs   Juergen Beisert
  • [PATCH 2/4] Add the driver for the i.MX23 debug UART   Juergen Beisert
  • [PATCH 3/4] Add the i.MX23-EVK platform (WIP)   Juergen Beisert
    • [PATCH 3/4] Add the i.MX23-EVK platform (WIP)   Sascha Hauer
  • [PATCH 4/4] Add the i.MX23 based Chumby platform (WIP)   Juergen Beisert
• No subject   Sascha Hauer
  • [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers   Sascha Hauer
  • [PATCH 2/3] mci: Add i.MX27/31 driver   Sascha Hauer
  • [PATCH 3/3] ARM pca100: Add mci support   Sascha Hauer
• [PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/5] commands/crc32: add compare 2 files crc   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/5] defaultenv: add xmodem support for update   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/5] defaultenv: add xmodem support for update   Sascha Hauer
      • [PATCH 3/5] defaultenv: add xmodem support for update   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/5] defaultenv: add update_barebox to update barebox easly for tftp or xmodem   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/5] nhk8815: use defaultenv   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it   Sascha Hauer
    • [PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MAKEALL: allow CROSS_COMPILE*=""   Jean-Christophe PLAGNIOL-VILLARD
• Switch the i.MX27's PLL in a safe manner   Juergen Beisert
  • [PATCH] Switch the i.MX27's PLL in a safe manner   Juergen Beisert
  • Switch the i.MX27's PLL in a safe manner   Juergen Beisert
• [2nd try] Switch the i.MX27's PLL in a safe manner   Juergen Beisert
  • [PATCH] Switch the i.MX27's PLL in a safe manner   Juergen Beisert
• No subject   Sascha Hauer
  • [PATCH 1/3] hush: pass context around in shell   Sascha Hauer
  • [PATCH 2/3] hush: fix nasty memory leak in hush   Sascha Hauer
  • [PATCH 3/3] hush: implement getopt builtin   Sascha Hauer
    • [PATCH 3/3] hush: implement getopt builtin   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 3/3] hush: implement getopt builtin   Sascha Hauer
      • [PATCH 3/3] hush: implement getopt builtin   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/3 v2] hush: implement getopt builtin   Sascha Hauer
• [PATCH v2] Add MCI card support to barebox   Juergen Beisert
  • [PATCH 01/10] x-functions do not return in case of failure.   Juergen Beisert
  • [PATCH 02/10] Make the disk driver less noisy   Juergen Beisert
  • [PATCH 03/10] Don't use a sector buffer on stack   Juergen Beisert
  • [PATCH 04/10] Don't try to guess the size of a disk if its size value is already given   Juergen Beisert
  • [PATCH 05/10] Add MCI card support to barebox   Juergen Beisert
  • [PATCH 06/10] Add i.MX23 MCI card support   Juergen Beisert
  • [PATCH 07/10] Add S3C2440 MCI card support   Juergen Beisert
  • [PATCH 08/10] i.MX27: Add mmc clock support in order to add an i.MX MCI driver   Juergen Beisert
  • [PATCH 09/10] mci: Add i.MX27/31 driver   Juergen Beisert
  • [PATCH 10/10] ARM pca100: Add mci support   Juergen Beisert
• [PATCH 00/13] OMAP/Beagleboard ehci support   Anand Gadiyar
• [PATCH] Add basic support from ARM Versatile/PB   Alexey Zaytsev
  • [PATCH] Add basic support from ARM Versatile/PB   Baruch Siach
    • [PATCH] Add basic support from ARM Versatile/PB   Alexey Zaytsev
  • [PATCH] Add basic support from ARM Versatile/PB   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] Add basic support from ARM Versatile/PB   Sascha Hauer
      • [PATCH] Add basic support from ARM Versatile/PB   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] Add basic support from ARM Versatile/PB   Alexey Zaytsev
• [PATCH] barebox-next: Avoid a Kconfig warning   Juergen Beisert
  • [PATCH] barebox-next: Avoid a Kconfig warning   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] barebox-next: Avoid a Kconfig warning   Juergen Beisert
• [PATCH v2] Add the i.MX23 architecure to barebox   Juergen Beisert
  • [PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs   Juergen Beisert
  • [PATCH 2/4] Add the driver for the i.MX23 debug UART   Juergen Beisert
  • [PATCH 3/4] Add the i.MX23-EVK platform (WIP)   Juergen Beisert
    • [PATCH 3/4] Add the i.MX23-EVK platform (WIP)   Juergen Beisert
  • [PATCH 4/4] Add the i.MX23 based Chumby platform (WIP)   Juergen Beisert
• Patches for -next   Sascha Hauer
  • [PATCH 02/17] mci: Add i.MX esdhc support   Sascha Hauer
  • [PATCH 04/17] spi i.MX: add spi version namespace to register defines   Sascha Hauer
  • [PATCH 05/17] spi i.MX: redirect functions to version specific functions   Sascha Hauer
  • [PATCH 06/17] spi i.MX: Add i.MX51 support   Sascha Hauer
  • [PATCH 07/17] Move mfd drivers to drivers/mfd   Sascha Hauer
  • [PATCH 08/17] move include files for mfd drivers to include/mfd   Sascha Hauer
  • [PATCH 09/17] mfd mc13892: Add spi support   Sascha Hauer
  • [PATCH 10/17] mfd mc13892: support reading the revision   Sascha Hauer
  • [PATCH 12/17] mci: align write buffer if necessary   Sascha Hauer
  • [PATCH 14/17] imx_serial: Add mx51 support   Sascha Hauer
  • [PATCH 15/17] ARM mmu: Call __mmu_cache_flush instead of hardcoded v4/v5 only function   Sascha Hauer
  • [PATCH 16/17] ARM i.MX: Add basic i.MX51 support   Sascha Hauer
  • [PATCH 17/17] ARM i.MX51: Add babbage board support   Sascha Hauer
• [PATCH 01/17] i.MX27: Add support for SDHC pins   Sascha Hauer
• [PATCH 03/17] mci: print error code on failure   Sascha Hauer
• [PATCH 11/17] mci: handle SD cards < 2.0 correctly   Sascha Hauer
  • [PATCH 11/17] mci: handle SD cards < 2.0 correctly   Juergen Beisert
    • [PATCH 11/17] mci: handle SD cards < 2.0 correctly   Belisko Marek
      • [PATCH 11/17] mci: handle SD cards < 2.0 correctly   Juergen Beisert
  • [PATCH 11/17] mci: handle SD cards < 2.0 correctly   Juergen Beisert
• [PATCH 13/17] defaultenv: handle disk partitions   Sascha Hauer
  • [PATCH 13/17] defaultenv: handle disk partitions   Juergen Beisert
    • [PATCH 13/17] defaultenv: handle disk partitions   Sascha Hauer
      • [PATCH 13/17] defaultenv: handle disk partitions   Juergen Beisert
      • [PATCH 13/17] defaultenv: handle disk partitions   Sascha Hauer
      • [PATCH 13/17] defaultenv: handle disk partitions   Juergen Beisert
      • [PATCH 13/17] defaultenv: handle disk partitions   Jean-Christophe PLAGNIOL-VILLARD
• defaultv env update v2   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/6] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/6] commands/crc32: add compare 2 files crc   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/6] defaultenv/update: merge update_rootfs and update_kernel   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/6] defaultenv/update: add check crc32 options   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/6] defaultenv: add xmodem support for update   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/6] defaultenv: add update_barebox to update barebox easly via tftp or xmodem   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] nhk8815: use defaultenv   Jean-Christophe PLAGNIOL-VILLARD
• Bring together i.MX23, its MCI driver and the ChumbyOne   Juergen Beisert
  • [PATCH 1/4] Glue i.MX23 and MCI support   Juergen Beisert
  • [PATCH 2/4] Adapt the i.MX23 MCI driver to the v2 i.MX23 patch series   Juergen Beisert
  • [PATCH 3/4] Spend the ChumbyOne a persistant environment memory on MCI card   Juergen Beisert
  • [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support   Juergen Beisert
    • [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support   Juergen Beisert
      • [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support   Sascha Hauer
    • [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support   Juergen Beisert
  • Bring together i.MX23, its MCI driver and the ChumbyOne   Juergen Beisert
• [PATCH v2] Add basic support from ARM Versatile/PB   Alexey Zaytsev
  • [PATCH v2] Add basic support from ARM Versatile/PB   Alexey Zaytsev
• [PATCH v3] Add basic support from ARM Versatile/PB   Alexey Zaytsev
  • [PATCH v3] Add basic support from ARM Versatile/PB   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH v3] Add basic support from ARM Versatile/PB   Alexey Zaytsev
      • [PATCH v3] Add basic support from ARM Versatile/PB   Sascha Hauer
• Where to store a header file   Juergen Beisert
• [PATCH] unbreak bootm   Eric Bénard
  • [PATCH] unbreak bootm   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] unbreak bootm   Eric Bénard
  • [PATCH] unbreak bootm   Sascha Hauer
    • [PATCH] unbreak bootm   Eric Bénard
      • [PATCH] unbreak bootm   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] unbreak bootm   Sascha Hauer
• [PATCH] eukrea_cpuimx27: update board support   Eric Bénard
• pull-request: kp-mcb2 board files and configuration, GCC 4.5.x optimizer workaround, powerpc mach changes   Carsten Schlote
  • pull-request: kp-mcb2 board files and configuration, GCC 4.5.x optimizer workaround, powerpc mach changes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix Sascha's patch   Eric Bénard
• [PATCH] eukrea_cpuimx35: update board support   Eric Bénard
• [PATCH] eukrea_cpuimx35: update defconfig   Eric Bénard
• [PATCH 1/5] [ppc/mpc5xxx] Fixed typo in cpu_init.c   Carsten Schlote
  • [PATCH 2/5] [ppc/mpc5xxx] Small text cleanups and ADDECR to output   Carsten Schlote
    • [PATCH 3/5] [kp-mcb2] Added board files and configs for konzeptpark mcb2   Carsten Schlote
      • [PATCH 3/5] [kp-mcb2] Added board files and configs for konzeptpark mcb2   Sascha Hauer
• [PATCH 4/5] [compiler] Added OPTIMIZE options to enable GCC optimizer   Carsten Schlote
  • [PATCH 5/5] [drivers/nor] Fixed mismatch in prototype   Carsten Schlote
  • [PATCH 4/5] [compiler] Added OPTIMIZE options to enable GCC optimizer   Sascha Hauer
• [PATCH 01/10] imx/clocksource: enable GPT1 before using it on CPUIMX25   Eric Bénard
  • [PATCH 02/10] mx25: add MMC clock support   Eric Bénard
  • [PATCH 03/10] MX25: fix IOMUX for ESDHC1 pins   Eric Bénard
  • [PATCH 04/10] mci-core: add more tested SD Cards   Eric Bénard
  • [PATCH 05/10] epautoconf: fix compile error   Eric Bénard
  • [PATCH 06/10] eukrea_cpuimx25: update board support   Eric Bénard
    • [PATCH 06/10] eukrea_cpuimx25: update board support   Baruch Siach
      • [PATCH 06/10] eukrea_cpuimx25: update board support   Eric Bénard
  • [PATCH 07/10] imx35-regs: add defines for USB and SD   Eric Bénard
  • [PATCH 08/10] speed-imx35: add support for SDHC1   Eric Bénard
  • [PATCH 09/10] iomux-mx35: fox IOMUX for SDHC1's pins   Eric Bénard
  • [PATCH 10/10] eukrea_cpuimx35: update board support   Eric Bénard
• [PATCH] i.MX23/MCI: Make the clock calculation easier to read and correct   Juergen Beisert
• [PATCH] imx: Separate framebuffer platformdata and the videomode   Juergen Beisert
  • [PATCH] imx: Separate framebuffer platformdata and the videomode   Sascha Hauer
    • [PATCH] imx: Separate framebuffer platformdata and the videomode   Juergen Beisert
• [PATCH] Add GPIO support and GPIO setup features to the S3C processors   Juergen Beisert
  • [PATCH] Add GPIO support and GPIO setup features to the S3C processors   Sascha Hauer
    • [PATCH] Add GPIO support and GPIO setup features to the S3C processors   Juergen Beisert
      • [PATCH v2] Add GPIO support and GPIO setup features to the S3C processors   Juergen Beisert
• [PATCH] S3C24xx: Remove variable type size restrictions   Juergen Beisert
• [PATCH] S3C24xx: Move register definitions into their user   Juergen Beisert
• [RFC] S3C24xx: Enable only the clocks of used units   Juergen Beisert
  • [RFC] S3C24xx: Enable only the clocks of used units   Jean-Christophe PLAGNIOL-VILLARD
    • [RFC] S3C24xx: Enable only the clocks of used units   Juergen Beisert
      • [RFC] S3C24xx: Enable only the clocks of used units   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add basic support for mini2440 dev board.   Marek Belisko
  • [PATCH] Add basic support for mini2440 dev board.   Juergen Beisert
    • [PATCH] Add basic support for mini2440 dev board.   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] Add basic support for mini2440 dev board.   Juergen Beisert
      • [PATCH] Add basic support for mini2440 dev board.   Belisko Marek
    • [PATCH] Add basic support for mini2440 dev board.   Belisko Marek
      • [PATCH] Add basic support for mini2440 dev board.   Juergen Beisert
      • [PATCH] Add basic support for mini2440 dev board.   Belisko Marek
• sparse fixes   Sascha Hauer
  • [PATCH 01/42] glob: sparse fixes   Sascha Hauer
  • [PATCH 02/42] fnmatch:sparse fixes   Sascha Hauer
  • [PATCH 03/42] readline: sparse fixes   Sascha Hauer
  • [PATCH 04/42] edit: sparse fixes   Sascha Hauer
  • [PATCH 05/42] command.h: sparse fixes   Sascha Hauer
  • [PATCH 06/42] crc32: sparse fixes   Sascha Hauer
  • [PATCH 07/42] copy_file: sparse fixes   Sascha Hauer
  • [PATCH 08/42] commands/mem.c: sparse fixes   Sascha Hauer
  • [PATCH 09/42] dlmalloc: sparse fixes   Sascha Hauer
  • [PATCH 10/42] console: sparse fixes   Sascha Hauer
  • [PATCH 11/42] notifier: sparse fixes   Sascha Hauer
  • [PATCH 12/42] fec_imx: sparse fixes   Sascha Hauer
  • [PATCH 13/42] imx gpio: sparse fixes   Sascha Hauer
  • [PATCH 14/42] imx clocksource: sparse fixes   Sascha Hauer
  • [PATCH 15/42] armlinux: sparse fixes   Sascha Hauer
  • [PATCH 16/42] arch/arm/cpu/cpu.c: sparse fixes   Sascha Hauer
  • [PATCH 17/42] cache-l2x0: sparse fixes   Sascha Hauer
  • [PATCH 18/42] speed-imx35: sparse fixes   Sascha Hauer
  • [PATCH 19/42] imx_dump_clocks: sparse fixes   Sascha Hauer
  • [PATCH 20/42] i.MX serial: sparse fixes   Sascha Hauer
  • [PATCH 21/42] i.MX remove wdog registers from header files   Sascha Hauer
    • [PATCH 21/42] i.MX remove wdog registers from header files   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 21/42] i.MX remove wdog registers from header files   Sascha Hauer
  • [PATCH 22/42] hush: sparse fixes   Sascha Hauer
  • [PATCH 23/42] ramfs: sparse fixes   Sascha Hauer
  • [PATCH 24/42] common/env.c: sparse fixes   Sascha Hauer
  • [PATCH 25/42] version_string: sparse fixes   Sascha Hauer
  • [PATCH 26/42] imx-nand: sparse fixes   Sascha Hauer
  • [PATCH 27/42] ping: make locally used functions static   Sascha Hauer
  • [PATCH 28/42] arm div0: sparse fixes   Sascha Hauer
  • [PATCH 29/42] edit: make locally used variable static   Sascha Hauer
  • [PATCH 30/42] common/environment.c: sparse fixes   Sascha Hauer
  • [PATCH 31/42] commands/mem.c: make locally used function static   Sascha Hauer
  • [PATCH 32/42] bootm: sparse fixes   Sascha Hauer
  • [PATCH 33/42] net: make locally used functions static   Sascha Hauer
  • [PATCH 34/42] lib/driver.c: sparse fixes   Sascha Hauer
  • [PATCH 35/42] remove dead ldiv code   Sascha Hauer
  • [PATCH 36/42] common/memsize.c: add missing include   Sascha Hauer
  • [PATCH 37/42] i.MX speed: add missing include   Sascha Hauer
  • [PATCH 38/42] libbb: sparse fixes   Sascha Hauer
  • [PATCH 39/42] remove strange flush_cache functions   Sascha Hauer
  • [PATCH 40/42] pcm043: ifx compiler warning   Sascha Hauer
  • [PATCH 41/42] arm interrupts.c: sparse fixes   Sascha Hauer
  • [PATCH 42/42] process_escape_sequence: Add missing include   Sascha Hauer
• [PATCH 1/3] fsl_udc: fix warning   Eric Bénard
• [PATCH 1/3] fsl_udc: fix warning   Eric Bénard
• [PATCH 1/3] fsl_udc: fix warning   Eric Bénard
  • [PATCH 2/3] cpuimx35: fix warning   Eric Bénard
    • [PATCH 2/3] cpuimx35: fix warning   Sascha Hauer
      • [PATCH 2/3] cpuimx35: fix warning   Eric Bénard
  • [PATCH 3/3] i.MX25 & 35 usb config bits : create mach/usb.h   Eric Bénard
• Beagleboard and barebox problem   Victor Rodriguez
  • Beagleboard and barebox problem   Sascha Hauer
    • Beagleboard and barebox problem   Victor Rodriguez
      • Beagleboard and barebox problem   Sascha Hauer
      • Beagleboard and barebox problem   Victor Rodriguez
      • Beagleboard and barebox problem   Sascha Hauer
• [PATCH] Add some help using the gpio commands at runtime   Juergen Beisert
  • [PATCH] Add some help using the gpio commands at runtime   Marc Reilly
    • [PATCH] Add some help using the gpio commands at runtime   Juergen Beisert
    • [PATCH v2] Add some help using the gpio commands at runtime   Juergen Beisert
      • [PATCH v2] Add some help using the gpio commands at runtime   Sascha Hauer
• [PATCH] Fix a simple typo to less confusing the user   Juergen Beisert
• more patches for next   Sascha Hauer
  • [PATCH 02/13] i.MX nand: optimize nand boot code for size   Sascha Hauer
  • [PATCH 03/13] mci-core: add multiple block support   Sascha Hauer
    • [PATCH 03/13] mci-core: add multiple block support   Juergen Beisert
    • [PATCH 03/13] mci-core: add multiple block support   Juergen Beisert
  • [PATCH 04/13] i.MX51: Fix mmcclk rate   Sascha Hauer
  • [PATCH 05/13] i.MX esdctl: Add register bits from redboot   Sascha Hauer
  • [PATCH 06/13] i.MX35 regs: Add watchdog base   Sascha Hauer
  • [PATCH 07/13] fb: i.MX IPU: remove unnecessary printf   Sascha Hauer
  • [PATCH 08/13] fb: i.MX IPU: move fb_info initialization to a single function   Sascha Hauer
  • [PATCH 09/13] fb: i.MX IPU: fold mx3fb_set_par into its only user   Sascha Hauer
  • [PATCH 10/13] mci: align data for commands   Sascha Hauer
    • [PATCH 10/13] mci: align data for commands   Juergen Beisert
  • [PATCH 11/13] ARM: Add Garz+Fricke Cupid board support   Sascha Hauer
  • [PATCH 12/13] defaultenv: fix mtdparts   Sascha Hauer
  • [PATCH 13/13] ARM: Add defconfig for Garz+Fricke cupid board   Sascha Hauer
  • more patches for next   Juergen Beisert
    • more patches for next   Marc Kleine-Budde
    • more patches for next   Sascha Hauer
• [PATCH 01/13] ARM pca100: Use a flash bbt   Sascha Hauer
• Documentation Updates   Robert Schwebel
  • [PATCH 01/32] reset_cpu: unify declaration   Robert Schwebel
  • [PATCH 03/32] Doxyfile: remove obsolete boards directory   Robert Schwebel
  • [PATCH 05/32] Doxyfile: remove non-existing directories   Robert Schwebel
  • [PATCH 08/32] doc: let doxygen find some assembler functions   Robert Schwebel
  • [PATCH 10/32] doc: remove reference to non-existing documentation   Robert Schwebel
  • [PATCH 11/32] doc: eliminate nonexisting reference   Robert Schwebel
  • [PATCH 12/32] doc: add missing quoting   Robert Schwebel
  • [PATCH 14/32] doc: mark code explicitely   Robert Schwebel
  • [PATCH 16/32] doc: fix wrongly named parameter   Robert Schwebel
  • [PATCH 25/32] doc: unify documentation for 'cat'   Robert Schwebel
  • [PATCH 26/32] doc: unify documentation for 'cd'   Robert Schwebel
  • [PATCH 27/32] doc: add documentation for 'echo'   Robert Schwebel
• [PATCH 02/32] Doxyfile: enable quiet output   Robert Schwebel
• [PATCH 04/32] Doxyfile: add exclude rules   Robert Schwebel
• [PATCH 06/32] Doxyfile: remove unused features   Robert Schwebel
• [PATCH 07/32] Doxyfile: enable assembler files   Robert Schwebel
• [PATCH 09/32] doc: remove nonexisting command   Robert Schwebel
• [PATCH 13/32] doc: fix typo   Robert Schwebel
  • [PATCH 13/32] doc: fix typo   Juergen Beisert
• [PATCH 15/32] doc: avoid that doxygen parses magic in command.h   Robert Schwebel
• [PATCH 17/32] doc: fix parameter name in mci-core   Robert Schwebel
• [PATCH 18/32] doc: silence doxygen warnings   Robert Schwebel
  • [PATCH 18/32] doc: silence doxygen warnings   Sascha Hauer
• [PATCH 19/32] doc: add macros to unify command help with doxygen   Robert Schwebel
• [PATCH 20/32] doc: add documentation for 'bmp'   Robert Schwebel
• [PATCH 21/32] doc: add documentation for 'clear'   Robert Schwebel
• [PATCH 22/32] doc: add documentation for 'crc32'   Robert Schwebel
• [PATCH 23/32] doc: add documentation for 'dfu'   Robert Schwebel
• [PATCH 24/32] doc: unify documentation for 'ls'   Robert Schwebel
• [PATCH 28/32] doc: unify documentation for 'edit'   Robert Schwebel
• [PATCH 29/32] doc: add documentation for 'bootm'   Robert Schwebel
• [PATCH 30/32] doc: unify documentation for 'addpart'   Robert Schwebel
• [PATCH 31/32] doc: unify documentation for 'cp'   Robert Schwebel
• [PATCH 32/32] doc: unify documentation for 'delpart'   Robert Schwebel
• Add dynamic video initialization to barebox   Juergen Beisert
  • [PATCH 01/11] imx: Separate framebuffer platformdata and the videomode   Juergen Beisert
    • [PATCH 01/11] imx: Separate framebuffer platformdata and the videomode   Sascha Hauer
      • [PATCH 01/11] imx: Separate framebuffer platformdata and the videomode   Juergen Beisert
  • [PATCH 02/11] Add more flags for sync control   Juergen Beisert
  • [PATCH 03/11] Bring in dynamic videomode selection at runtime   Juergen Beisert
    • [PATCH 03/11] Bring in dynamic videomode selection at runtime   Sascha Hauer
      • [PATCH 03/11] Bring in dynamic videomode selection at runtime   Juergen Beisert
  • [PATCH 04/11] Remove the old videomode functions   Juergen Beisert
  • [PATCH 05/11] Add verbose framebuffer device info   Juergen Beisert
  • [PATCH 06/11] Adapt the existing imx fb driver to support runtime videomode selection   Juergen Beisert
  • [PATCH 07/11] Adapt the existing imx-ipu fb driver to support runtime videomode selection   Juergen Beisert
    • [PATCH 07/11] Adapt the existing imx-ipu fb driver to support runtime videomode selection   Sascha Hauer
      • [PATCH 07/11] Adapt the existing imx-ipu fb driver to support runtime videomode selection   Juergen Beisert
  • [PATCH 08/11] Add a video driver for S3C2440 bases platforms   Juergen Beisert
    • [PATCH 08/11] Add a video driver for S3C2440 bases platforms   Sascha Hauer
      • [PATCH 08/11] Add a video driver for S3C2440 bases platforms   Juergen Beisert
  • [PATCH 09/11] STM378x: Add video driver for this platform   Juergen Beisert
    • [PATCH 09/11] STM378x: Add video driver for this platform   Sascha Hauer
      • [PATCH 09/11] STM378x: Add video driver for this platform   Juergen Beisert
  • [PATCH 10/11] Remove variable size restrictions   Juergen Beisert
  • [PATCH 11/11] Add doxygen documentation to the framebfuffer code   Juergen Beisert
• No subject  
• No subject  
• [PATCH] barebox:usb_gadget:Remove compilation error.   Marek Belisko
  • [PATCH] barebox:usb_gadget:Remove compilation error.   Sascha Hauer
    • [PATCH] barebox:usb_gadget:Remove compilation error.   Belisko Marek
      • [PATCH] barebox:usb_gadget:Remove compilation error.   Sascha Hauer
• [PATCHv2] Add dynamic video initialization to barebox   Juergen Beisert
  • [PATCH 01/12] Separate framebuffer platformdata and the videomode   Juergen Beisert
  • [PATCH 02/12] Add more flags for sync control   Juergen Beisert
  • [PATCH 03/12] Bring in dynamic videomode selection at runtime   Juergen Beisert
  • [PATCH 04/12] Remove the old videomode functions   Juergen Beisert
  • [PATCH 05/12] Add verbose framebuffer device info   Juergen Beisert
  • [PATCH 06/12] Adapt the existing imx fb driver to support runtime videomode selection   Juergen Beisert
  • [PATCH 07/12] Adapt the existing imx-ipu fb driver to support runtime videomode selection   Juergen Beisert
  • [PATCH 08/12] Add a video driver for S3C2440 bases platforms   Juergen Beisert
  • [PATCH 09/12] STM378x: Add video driver for this platform   Juergen Beisert
  • [PATCH 10/12] Remove variable size restrictions   Juergen Beisert
  • [PATCH 11/12] Add doxygen documentation to the framebfuffer code   Juergen Beisert
  • [PATCH 12/12] Provide more driver specific data in a videomode   Juergen Beisert
• [PATCH] ARM i.MX27: remove duplicated defines   Sascha Hauer
• command bootu to start kernel   Belisko Marek
  • command bootu to start kernel   Juergen Beisert
    • command bootu to start kernel   Sascha Hauer
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Juergen Beisert
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Marc Reilly
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Baruch Siach
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Marc Kleine-Budde
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Marc Kleine-Budde
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Marc Kleine-Budde
      • command bootu to start kernel   Uwe Kleine-König
      • command bootu to start kernel   Belisko Marek
      • command bootu to start kernel   Juergen Beisert
  • command bootu to start kernel   Sascha Hauer
• [PATCH] MCI: Add some doc how to handle MCI cards   Juergen Beisert

Last message date: Fri Oct 29 15:36:26 EDT 2010
Archived on: Mon Mar 21 11:19:14 EDT 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...