[PATCH 01/11] imx: Separate framebuffer platformdata and the videomode
Sascha Hauer
s.hauer at pengutronix.de
Fri Oct 22 13:46:21 EDT 2010
On Fri, Oct 22, 2010 at 06:53:15PM +0200, Juergen Beisert wrote:
> This patch separates the imx platformdata and its videomode in two structures,
> in order to support more than one defined videomode in the boardfile. This
> is intended to support runtime videomode selection later on. It also uses
> now the same videomode setup style than the imx-fpu based systems (like the
> i.MX35).
>
> Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
> ---
> arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 28 +++++++++--------
> arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 28 +++++++++--------
> arch/arm/boards/guf-neso/board.c | 28 +++++++++--------
> arch/arm/boards/imx21ads/imx21ads.c | 34 +++++++++++----------
> arch/arm/boards/pcm038/pcm038.c | 28 +++++++++--------
> arch/arm/mach-imx/include/mach/imxfb.h | 2 +-
> drivers/video/imx.c | 6 ++--
> 7 files changed, 82 insertions(+), 72 deletions(-)
>
> diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> index 805ffe2..032897a 100644
> --- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> +++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> @@ -120,20 +120,22 @@ static struct device_d nand_dev = {
> .platform_data = &nand_info,
> };
>
> +static struct fb_videomode cmo_display = {
> + .name = "CMO-QVGA",
> + .refresh = 60,
> + .xres = 320,
> + .yres = 240,
> + .pixclock = KHZ2PICOS(6500),
> + .hsync_len = 30,
> + .left_margin = 38,
> + .right_margin = 20,
> + .vsync_len = 3,
> + .upper_margin = 15,
> + .lower_margin = 4,
> +};
> +
> static struct imx_fb_videomode imxfb_mode = {
> - .mode = {
> - .name = "CMO-QVGA",
> - .refresh = 60,
> - .xres = 320,
> - .yres = 240,
> - .pixclock = KHZ2PICOS(6500),
> - .hsync_len = 30,
> - .left_margin = 38,
> - .right_margin = 20,
> - .vsync_len = 3,
> - .upper_margin = 15,
> - .lower_margin = 4,
> - },
> + .mode = &cmo_display,
> .pcr = 0xCAD08B80,
> .bpp = 16,
> };
What are we going to do about the .pcr value? It is display specific.
Look for example in pcm970-baseboard.c in the kernel. It has two
different possible displays with two different pcr values.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list