[PATCH 13/32] doc: fix typo

[Juergen Beisert]

Robert Schwebel wrote:
> Remove a # which leads to this warning:
> arch/arm/mach-s3c24xx/lowlevel-init.S:307: Warning: explicit link request
> to 'CALC_NFCONF_TIMING' could not be resolved
>
> Signed-off-by: Robert Schwebel <r.schwebel at pengutronix.de>
> ---
>  arch/arm/mach-s3c24xx/lowlevel-init.S |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-s3c24xx/lowlevel-init.S
> b/arch/arm/mach-s3c24xx/lowlevel-init.S index e8004e5..27f3a32 100644
> --- a/arch/arm/mach-s3c24xx/lowlevel-init.S
> +++ b/arch/arm/mach-s3c24xx/lowlevel-init.S
> @@ -304,7 +304,7 @@ minimalistic. Setup the NAND access timing is done in a
> safe manner, what means: Slowest possible values are used. If you want to
> increase the speed you should define the BOARD_DEFAULT_NAND_TIMING to a
> valid setting into the NFCONF register and add it to your board specific
> config.h. Refer S3C24x0's -datasheet for further details. The macro
> #CALC_NFCONF_TIMING could help to +datasheet for further details. The macro
> CALC_NFCONF_TIMING could help to calculate the register setting in a
> hardware independent manner.
>
>  @note The regular NAND driver uses a platform data structure to define the

Hmm, but this macro exists and doxygen should generate a reference to it. 
Don't know why it spits out a warning here.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |