[PATCH 2/4] Adapt the i.MX23 MCI driver to the v2 i.MX23 patch series

[Juergen Beisert]

The i.MX23 v2 architecture patch series was sligthly modified to easify
the i.MX28 architecture addition later on. So, we need now an index to
query the SSP clock frequency.

Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
---
 drivers/mci/stm378x.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mci/stm378x.c b/drivers/mci/stm378x.c
index fbb9994..8865ee8 100644
--- a/drivers/mci/stm378x.c
+++ b/drivers/mci/stm378x.c
@@ -481,7 +481,7 @@ static unsigned setup_clock_speed(struct device_d *hw_dev, unsigned nc)
 		return 0;
 	}
 
-	ssp = imx_get_sspclk() * 1000;
+	ssp = imx_get_sspclk(0) * 1000;
 
 	for (div1 = 2; div1 < 255; div1 += 2) {
 		div2 = ssp / nc / div1;
@@ -658,20 +658,20 @@ static int stm_mci_probe(struct device_d *hw_dev)
 	host->host_caps = pd->caps;
 
 	if (pd->f_min == 0) {
-		host->f_min = imx_get_sspclk() / 254U / 256U * 1000U;
+		host->f_min = imx_get_sspclk(0) / 254U / 256U * 1000U;
 		pr_debug("Min. frequency is %u Hz\n", host->f_min);
 	} else {
 		host->f_min = pd->f_min;
 		pr_debug("Min. frequency is %u Hz, could be %u Hz\n",
-			host->f_min, imx_get_sspclk() / 254U / 256U * 1000U);
+			host->f_min, imx_get_sspclk(0) / 254U / 256U * 1000U);
 	}
 	if (pd->f_max == 0) {
-		host->f_max = imx_get_sspclk() / 2U / 1U * 1000U;
+		host->f_max = imx_get_sspclk(0) / 2U / 1U * 1000U;
 		pr_debug("Max. frequency is %u Hz\n", host->f_max);
 	} else {
 		host->f_max =  pd->f_max;
 		pr_debug("Max. frequency is %u Hz, could be %u Hz\n",
-			host->f_max, imx_get_sspclk() / 2U / 1U * 1000U);
+			host->f_max, imx_get_sspclk(0) / 2U / 1U * 1000U);
 	}
 
 #ifdef CONFIG_MCI_INFO
-- 
1.7.2.3