[PATCH 06/10] eukrea_cpuimx25: update board support

[Baruch Siach]

Hi Eric,

On Thu, Oct 14, 2010 at 04:05:28PM +0200, Eric Bénard wrote:
> - support NAND external boot
> - enable only used clocks
> - LCD fix in /env/bin/init
> - I2C support
> - SDCard support
> - USB Host 1 support
> - DFU support on OTG port
> - update defconfig
> 
> Signed-off-by: Eric Bénard <eric at eukrea.com>
> ---
>  arch/arm/boards/eukrea_cpuimx25/env/bin/init      |    2 +
>  arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c |  104 +++++++++++++++++++-
>  arch/arm/boards/eukrea_cpuimx25/lowlevel.c        |   64 ++++++++++---
>  arch/arm/configs/eukrea_cpuimx25_defconfig        |   12 ++-
>  4 files changed, 162 insertions(+), 20 deletions(-)

[snip]

> diff --git a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c 
> b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> index 7fd1031..c2eb398 100644
> --- a/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c
> +++ b/arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c

[snip]

> +#ifdef CONFIG_USB
> +
> +#define MX35_H1_SIC_SHIFT	21
> +#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
> +#define MX35_H1_PM_BIT		(1 << 8)
> +#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
> +#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
> +#define MX35_H1_TLL_BIT		(1 << 5)
> +#define MX35_H1_USBTE_BIT	(1 << 4)
> +#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)

The exact same defines appear in patch no. 10 of this series. IMO these should 
go into a shared header file.

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -