[PATCH] Add GPIO support and GPIO setup features to the S3C processors
Juergen Beisert
jbe at pengutronix.de
Mon Oct 18 12:43:39 EDT 2010
From: Juergen Beisert <juergen at kreuzholzen.de>
Subject: Add GPIO support and GPIO setup features to the S3C processors
This patch adds genetic GPIO support to all S3C2440 processor based systems.
Also it adds definitions to setup the pin multiplexer in a way the other
architectures do.
Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
Signed-off-by: Juergen Beisert <juergen at kreuzholzen.de>
---
arch/arm/Kconfig | 1
arch/arm/mach-s3c24xx/Makefile | 2
arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 170 ++++++++
arch/arm/mach-s3c24xx/include/mach/gpio.h | 31 +
arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h | 426 +++++++++++++++++++++
5 files changed, 629 insertions(+), 1 deletion(-)
Index: barebox-2010.10.0/arch/arm/mach-s3c24xx/gpio-s3c24x0.c
===================================================================
--- /dev/null
+++ barebox-2010.10.0/arch/arm/mach-s3c24xx/gpio-s3c24x0.c
@@ -0,0 +1,170 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <mach/s3c24x0-iomap.h>
+#include <mach/gpio.h>
+
+static const unsigned char group_offset[] =
+{
+ 0x00, /* GPA */
+ 0x10, /* GPB */
+ 0x20, /* GPC */
+ 0x30, /* GPD */
+ 0x40, /* GPE */
+ 0x50, /* GPF */
+ 0x60, /* GPG */
+ 0x70, /* GPH */
+#ifdef CONFIG_CPU_S3C2440
+ 0xd0, /* GPJ */
+#endif
+};
+
+void gpio_set_value(unsigned gpio, int value)
+{
+ unsigned group = gpio >> 5;
+ unsigned bit = gpio % 32;
+ unsigned offset;
+ uint32_t reg;
+
+ offset = group_offset[group];
+
+ reg = readl(GPADAT + offset);
+ reg &= ~(1 << bit);
+ reg |= (!!value) << bit;
+ writel(reg, GPADAT + offset);
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+ unsigned group = gpio >> 5;
+ unsigned bit = gpio % 32;
+ unsigned offset;
+ uint32_t reg;
+
+ offset = group_offset[group];
+
+ reg = readl(GPACON + offset);
+ reg &= ~(0x3 << (bit << 1));
+ writel(reg, GPACON + offset);
+
+ return 0;
+}
+
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ unsigned group = gpio >> 5;
+ unsigned bit = gpio % 32;
+ unsigned offset;
+ uint32_t reg;
+
+ offset = group_offset[group];
+
+ /* value */
+ reg = readl(GPADAT + offset);
+ reg &= ~(1 << bit);
+ reg |= (!!value) << bit;
+ writel(reg, GPADAT + offset);
+
+ /* direction */
+ if (group == 0) { /* GPA is special */
+ reg = readl(GPACON);
+ reg &= ~(1 << bit);
+ writel(reg, GPACON);
+ } else {
+ reg = readl(GPACON + offset);
+ reg &= ~(0x3 << (bit << 1));
+ reg |= 0x1 << (bit << 1);
+ writel(reg, GPACON + offset);
+ }
+
+ return 0;
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ unsigned group = gpio >> 5;
+ unsigned bit = gpio % 32;
+ unsigned offset;
+ uint32_t reg;
+
+ offset = group_offset[group];
+
+ /* value */
+ reg = readl(GPADAT + offset);
+
+ return !!(reg & (1 << bit));
+}
+
+void s3c_gpio_mode(unsigned gpio_mode)
+{
+ unsigned group, func, bit, offset, gpio;
+ uint32_t reg;
+
+ group = GET_GROUP(gpio_mode);
+ func = GET_FUNC(gpio_mode);
+ bit = GET_BIT(gpio_mode);
+ gpio = GET_GPIO_NO(gpio_mode);
+
+ if (group == 0) {
+ /* GPA is special */
+ switch (func) {
+ case 0: /* GPIO input */
+ pr_debug("Cannot set GPA pin to GPIO input\n");
+ break;
+ case 1: /* GPIO output */
+ gpio_direction_output(bit, GET_GPIOVAL(gpio_mode));
+ break;
+ default:
+ reg = readl(GPACON);
+ reg |= 1 << bit;
+ writel(reg, GPACON);
+ break;
+ }
+ return;
+ }
+
+ offset = group_offset[group];
+
+ if (PU_PRESENT(gpio_mode)) {
+ reg = readl(GPACON + offset + 8);
+ if (GET_PU(gpio_mode))
+ reg |= (1 << bit); /* set means _disabled_ */
+ else
+ reg &= ~(1 << bit);
+ writel(reg, GPACON + offset + 8);
+ }
+
+ switch (func) {
+ case 0: /* input */
+ gpio_direction_input(gpio);
+ break;
+ case 1: /* output */
+ gpio_direction_output(gpio, GET_GPIOVAL(gpio_mode));
+ break;
+ case 2: /* function one */
+ case 3: /* function two */
+ reg = readl(GPACON + offset);
+ reg &= ~(0x3 << (bit << 1));
+ reg |= func << (bit << 1);
+ writel(reg, GPACON + offset);
+ break;
+ }
+}
Index: barebox-2010.10.0/arch/arm/mach-s3c24xx/include/mach/gpio.h
===================================================================
--- /dev/null
+++ barebox-2010.10.0/arch/arm/mach-s3c24xx/include/mach/gpio.h
@@ -0,0 +1,31 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_MACH_GPIO_H
+#define __ASM_MACH_GPIO_H
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2410)
+# include <mach/iomux-s3c24x0.h>
+#endif
+
+void gpio_set_value(unsigned, int);
+int gpio_direction_input(unsigned);
+int gpio_direction_output(unsigned, int);
+int gpio_get_value(unsigned);
+void s3c_gpio_mode(unsigned);
+
+#endif /* __ASM_MACH_GPIO_H */
Index: barebox-2010.10.0/arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h
===================================================================
--- /dev/null
+++ barebox-2010.10.0/arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h
@@ -0,0 +1,426 @@
+/*
+ * Copyright (C) 2010 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IOMUX_S3C24x0_H
+#define __MACH_IOMUX_S3C24x0_H
+
+/* 3322222222221111111111
+ * 10987654321098765432109876543210
+ * ^^^^^_ Bit offset
+ * ^^^^______ Group Number
+ * ^^____________ Function
+ * ^______________ initial GPIO out value
+ * ^_______________ Pull up feature present
+ * ^________________ initial pull up setting
+ */
+
+
+#define PIN(group,bit) (group * 32 + bit)
+#define FUNC(x) (((x) & 0x3) << 11)
+#define GET_FUNC(x) (((x) >> 11) & 0x3)
+#define GET_GROUP(x) (((x) >> 5) & 0xf)
+#define GET_BIT(x) (((x) & 0x1ff) % 32)
+#define GET_GPIOVAL(x) (((x) >> 13) & 0x1)
+#define GET_GPIO_NO(x) ((x & 0x1ff))
+#define GPIO_OUT FUNC(1)
+#define GPIO_IN FUNC(0)
+#define GPIO_VAL(x) ((!!(x)) << 13)
+#define PU (1 << 14)
+#define PU_PRESENT(x) (!!((x) & (1 << 14)))
+#define ENABLE_PU (0 << 15)
+#define DISABLE_PU (1 << 15)
+#define GET_PU(x) (!!((x) & DISABLE_PU))
+
+/*
+ * Group 0: GPIO 0...31
+ * Used GPIO: 0...22
+ * These pins can also act as GPIO outputs
+ */
+#define GPA0_ADDR0 (PIN(0,0) | FUNC(2))
+#define GPA0_ADDR0_GPIO (PIN(0,0) | FUNC(0))
+#define GPA1_ADDR16 (PIN(0,1) | FUNC(2))
+#define GPA1_ADDR16_GPIO (PIN(0,1) | FUNC(0))
+#define GPA2_ADDR17 (PIN(0,2) | FUNC(2))
+#define GPA2_ADDR17_GPIO (PIN(0,2) | FUNC(0))
+#define GPA3_ADDR18 (PIN(0,3) | FUNC(2))
+#define GPA3_ADDR18_GPIO (PIN(0,3) | FUNC(0))
+#define GPA4_ADDR19 (PIN(0,4) | FUNC(2))
+#define GPA4_ADDR19_GPIO (PIN(0,4) | FUNC(0))
+#define GPA5_ADDR20 (PIN(0,5) | FUNC(2))
+#define GPA5_ADDR20_GPIO (PIN(0,5) | FUNC(0))
+#define GPA6_ADDR21 (PIN(0,6) | FUNC(2))
+#define GPA6_ADDR21_GPIO (PIN(0,6) | FUNC(0))
+#define GPA7_ADDR22 (PIN(0,7) | FUNC(2))
+#define GPA7_ADDR22_GPIO (PIN(0,7) | FUNC(0))
+#define GPA8_ADDR23 (PIN(0,8) | FUNC(2))
+#define GPA8_ADDR23_GPIO (PIN(0,8) | FUNC(0))
+#define GPA9_ADDR24 (PIN(0,9) | FUNC(2))
+#define GPA9_ADDR24_GPIO (PIN(0,9) | FUNC(0))
+#define GPA10_ADDR25 (PIN(0,10) | FUNC(2))
+#define GPA10_ADDR25_GPIO (PIN(0,10) | FUNC(0))
+#define GPA11_ADDR26 (PIN(0,11) | FUNC(2))
+#define GPA11_ADDR26_GPIO (PIN(0,11) | FUNC(0))
+#define GPA12_NGCS1 (PIN(0,12) | FUNC(2))
+#define GPA12_NGCS1_GPIO (PIN(0,12) | FUNC(0))
+#define GPA13_NGCS2 (PIN(0,13) | FUNC(2))
+#define GPA13_NGCS2_GPIO (PIN(0,13) | FUNC(0))
+#define GPA14_NGCS3 (PIN(0,14) | FUNC(2))
+#define GPA14_NGCS3_GPIO (PIN(0,14) | FUNC(0))
+#define GPA15_NGCS4 (PIN(0,15) | FUNC(2))
+#define GPA15_NGCS4_GPIO (PIN(0,15) | FUNC(0))
+#define GPA16_NGCS5 (PIN(0,16) | FUNC(2))
+#define GPA16_NGCS5_GPIO (PIN(0,16) | FUNC(0))
+#define GPA17_CLE (PIN(0,17) | FUNC(2))
+#define GPA17_CLE_GPIO (PIN(0,17) | FUNC(0))
+#define GPA18_ALE (PIN(0,18) | FUNC(2))
+#define GPA18_ALE_GPIO (PIN(0,18) | FUNC(0))
+#define GPA19_NFWE (PIN(0,19) | FUNC(2))
+#define GPA19_NFWE_GPIO (PIN(0,19) | FUNC(0))
+#define GPA20_NFRE (PIN(0,20) | FUNC(2))
+#define GPA20_NFRE_GPIO (PIN(0,20) | FUNC(0))
+#define GPA21_NRSTOUT (PIN(0,21) | FUNC(2))
+#define GPA21_NRSTOUT_GPIO (PIN(0,21) | FUNC(0))
+#define GPA22_NFCE (PIN(0,22) | FUNC(2))
+#define GPA22_NFCE_GPIO (PIN(0,22) | FUNC(0))
+
+/*
+ * Group 1: GPIO 32...63
+ * Used GPIO: 0...10
+ * these pins can also act as GPIO inputs/outputs
+ */
+#define GPB0_TOUT0 (PIN(1,0) | FUNC(2) | PU)
+#define GPB0_GPIO (PIN(1,0) | FUNC(0) | PU)
+#define GPB1_TOUT1 (PIN(1,1) | FUNC(2) | PU)
+#define GPB1_GPIO (PIN(1,1) | FUNC(0) | PU)
+#define GPB2_TOUT2 (PIN(1,2) | FUNC(2) | PU)
+#define GPB2_GPIO (PIN(1,2) | FUNC(0) | PU)
+#define GPB3_TOUT3 (PIN(1,3) | FUNC(2) | PU)
+#define GPB3_GPIO (PIN(1,3) | FUNC(0) | PU)
+#define GPB4_TCLK0 (PIN(1,4) | FUNC(2) | PU)
+#define GPB4_GPIO (PIN(1,4) | FUNC(0) | PU)
+#define GPB5_NXBACK (PIN(1,5) | FUNC(2) | PU)
+#define GPB5_GPIO (PIN(1,5) | FUNC(0) | PU)
+#define GPB6_NXBREQ (PIN(1,6) | FUNC(2) | PU)
+#define GPB6_GPIO (PIN(1,6) | FUNC(0) | PU)
+#define GPB7_NXDACK1 (PIN(1,7) | FUNC(2) | PU)
+#define GPB7_GPIO (PIN(1,7) | FUNC(0) | PU)
+#define GPB8_NXDREQ1 (PIN(1,8) | FUNC(2) | PU)
+#define GPB8_GPIO (PIN(1,8) | FUNC(0) | PU)
+#define GPB9_NXDACK0 (PIN(1,9) | FUNC(2) | PU)
+#define GPB9_GPIO (PIN(1,9) | FUNC(0) | PU)
+#define GPB10_NXDREQ0 (PIN(1,10) | FUNC(2) | PU)
+#define GPB10_GPIO (PIN(1,10) | FUNC(0) | PU)
+
+/*
+ * Group 1: GPIO 64...95
+ * Used GPIO: 0...15
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPC0_LEND (PIN(2,0) | FUNC(2) | PU)
+#define GPC0_GPIO (PIN(2,0) | FUNC(0) | PU)
+#define GPC1_VCLK (PIN(2,1) | FUNC(2) | PU)
+#define GPC1_GPIO (PIN(2,1) | FUNC(0) | PU)
+#define GPC2_VLINE (PIN(2,2) | FUNC(2) | PU)
+#define GPC2_GPIO (PIN(2,2) | FUNC(0) | PU)
+#define GPC3_VFRAME (PIN(2,3) | FUNC(2) | PU)
+#define GPC3_GPIO (PIN(2,3) | FUNC(0) | PU)
+#define GPC4_VM (PIN(2,4) | FUNC(2) | PU)
+#define GPC4_GPIO (PIN(2,4) | FUNC(0) | PU)
+#define GPC5_LPCOE (PIN(2,5) | FUNC(2) | PU)
+#define GPC5_GPIO (PIN(2,5) | FUNC(0) | PU)
+#define GPC6_LPCREV (PIN(2,6) | FUNC(2) | PU)
+#define GPC6_GPIO (PIN(2,6) | FUNC(0) | PU)
+#define GPC7_LPCREVB (PIN(2,7) | FUNC(2) | PU)
+#define GPC7_GPIO (PIN(2,7) | FUNC(0) | PU)
+#define GPC8_VD0 (PIN(2,8) | FUNC(2) | PU)
+#define GPC8_GPIO (PIN(2,8) | FUNC(0) | PU)
+#define GPC9_VD1 (PIN(2,9) | FUNC(2) | PU)
+#define GPC9_GPIO (PIN(2,9) | FUNC(0) | PU)
+#define GPC10_VD2 (PIN(2,10) | FUNC(2) | PU)
+#define GPC10_GPIO (PIN(2,10) | FUNC(0) | PU)
+#define GPC11_VD3 (PIN(2,11) | FUNC(2) | PU)
+#define GPC11_GPIO (PIN(2,11) | FUNC(0) | PU)
+#define GPC12_VD4 (PIN(2,12) | FUNC(2) | PU)
+#define GPC12_GPIO (PIN(2,12) | FUNC(0) | PU)
+#define GPC13_VD5 (PIN(2,13) | FUNC(2) | PU)
+#define GPC13_GPIO (PIN(2,13) | FUNC(0) | PU)
+#define GPC14_VD6 (PIN(2,14) | FUNC(2) | PU)
+#define GPC14_GPIO (PIN(2,14) | FUNC(0) | PU)
+#define GPC15_VD7 (PIN(2,15) | FUNC(2) | PU)
+#define GPC15_GPIO (PIN(2,15) | FUNC(0) | PU)
+
+/*
+ * Group 1: GPIO 96...127
+ * Used GPIO: 0...15
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPD0_VD8 (PIN(3,0) | FUNC(2) | PU)
+#define GPD0_GPIO (PIN(3,0) | FUNC(0) | PU)
+#define GPD1_VD9 (PIN(3,1) | FUNC(2) | PU)
+#define GPD1_GPIO (PIN(3,1) | FUNC(0) | PU)
+#define GPD2_VD10 (PIN(3,2) | FUNC(2) | PU)
+#define GPD2_GPIO (PIN(3,2) | FUNC(0) | PU)
+#define GPD3_VD11 (PIN(3,3) | FUNC(2) | PU)
+#define GPD3_GPIO (PIN(3,3) | FUNC(0) | PU)
+#define GPD4_VD12 (PIN(3,4) | FUNC(2) | PU)
+#define GPD4_GPIO (PIN(3,4) | FUNC(0) | PU)
+#define GPD5_VD13 (PIN(3,5) | FUNC(2) | PU)
+#define GPD5_GPIO (PIN(3,5) | FUNC(0) | PU)
+#define GPD6_VD14 (PIN(3,6) | FUNC(2) | PU)
+#define GPD6_GPIO (PIN(3,6) | FUNC(0) | PU)
+#define GPD7_VD15 (PIN(3,7) | FUNC(2) | PU)
+#define GPD7_GPIO (PIN(3,7) | FUNC(0) | PU)
+#define GPD8_VD16 (PIN(3,8) | FUNC(2) | PU)
+#define GPD8_GPIO (PIN(3,8) | FUNC(0) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPD8_SPIMISO1 (PIN(3,8) | FUNC(3) | PU)
+#endif
+#define GPD9_VD17 (PIN(3,9) | FUNC(2) | PU)
+#define GPD9_GPIO (PIN(3,9) | FUNC(0) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPD9_SPIMOSI1 (PIN(3,9) | FUNC(3) | PU)
+#endif
+#define GPD10_VD18 (PIN(3,10) | FUNC(2) | PU)
+#define GPD10_GPIO (PIN(3,10) | FUNC(0) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPD10_SPICLK (PIN(3,10) | FUNC(3) | PU)
+#endif
+#define GPD11_VD19 (PIN(3,11) | FUNC(2) | PU)
+#define GPD11_GPIO (PIN(3,11) | FUNC(0) | PU)
+#define GPD12_VD20 (PIN(3,12) | FUNC(2) | PU)
+#define GPD12_GPIO (PIN(3,12) | FUNC(0) | PU)
+#define GPD13_VD21 (PIN(3,13) | FUNC(2) | PU)
+#define GPD13_GPIO (PIN(3,13) | FUNC(0) | PU)
+#define GPD14_VD22 (PIN(3,14) | FUNC(2) | PU)
+#define GPD14_GPIO (PIN(3,14) | FUNC(0) | PU)
+#define GPD14_NSS1 (PIN(3,14) | FUNC(3) | PU)
+#define GPD15_VD23 (PIN(3,15) | FUNC(2) | PU)
+#define GPD15_GPIO (PIN(3,15) | FUNC(0) | PU)
+#define GPD15_NSS0 (PIN(3,15) | FUNC(3) | PU)
+
+/*
+ * Group 1: GPIO 128...159
+ * Used GPIO: 0...15
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPE0_I2SLRCK (PIN(4,0) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPE0_AC_SYNC (PIN(4,0) | FUNC(3) | PU)
+#endif
+#define GPE0_GPIO (PIN(4,0) | FUNC(0) | PU)
+#define GPE1_I2SSCLK (PIN(4,1) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPE1_AC_BIT_CLK (PIN(4,1) | FUNC(3) | PU)
+#endif
+#define GPE1_GPIO (PIN(4,1) | FUNC(0) | PU)
+#define GPE2_CDCLK (PIN(4,2) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPE2_AC_NRESET (PIN(4,2) | FUNC(3) | PU)
+#endif
+#define GPE2_GPIO (PIN(4,2) | FUNC(0) | PU)
+#define GPE3_I2SDI (PIN(4,3) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPE3_AC_SDATA_IN (PIN(4,3) | FUNC(3) | PU)
+#endif
+#ifdef CONFIG_CPU_S3C2410
+# define GPE_NSS0 (PIN(4,3) | FUNC(3) | PU)
+#endif
+#define GPE3_GPIO (PIN(4,3) | FUNC(0) | PU)
+#define GPE4_I2SDO (PIN(4,4) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPE4_AC_SDATA_OUT (PIN(4,4) | FUNC(3) | PU)
+#endif
+#ifdef CONFIG_CPU_S3C2440
+# define GPE4_I2SSDI (PIN(4,4) | FUNC(3) | PU)
+#endif
+#define GPE4_GPIO (PIN(4,4) | FUNC(0) | PU)
+#define GPE5_SDCLK (PIN(4,5) | FUNC(2) | PU)
+#define GPE5_GPIO (PIN(4,5) | FUNC(0) | PU)
+#define GPE6_SDCMD (PIN(4,6) | FUNC(2) | PU)
+#define GPE6_GPIO (PIN(4,6) | FUNC(0) | PU)
+#define GPE7_SDDAT0 (PIN(4,7) | FUNC(2) | PU)
+#define GPE7_GPIO (PIN(4,7) | FUNC(0) | PU)
+#define GPE8_SDDAT1 (PIN(4,8) | FUNC(2) | PU)
+#define GPE8_GPIO (PIN(4,8) | FUNC(0) | PU)
+#define GPE9_SDDAT2 (PIN(4,9) | FUNC(2) | PU)
+#define GPE9_GPIO (PIN(4,9) | FUNC(0) | PU)
+#define GPE10_SDDAT3 (PIN(4,10) | FUNC(2) | PU)
+#define GPE10_GPIO (PIN(4,10) | FUNC(0) | PU)
+#define GPE11_SPIMISO0 (PIN(4,11) | FUNC(2) | PU)
+#define GPE11_GPIO (PIN(4,11) | FUNC(0) | PU)
+#define GPE12_SPIMOSI0 (PIN(4,12) | FUNC(2) | PU)
+#define GPE12_GPIO (PIN(4,12) | FUNC(0) | PU)
+#define GPE13_SPICLK0 (PIN(4,13) | FUNC(2) | PU)
+#define GPE13_GPIO (PIN(4,13) | FUNC(0) | PU)
+#define GPE14_IICSCL (PIN(4,14) | FUNC(2)) /* no pullup option */
+#define GPE14_GPIO (PIN(4,14) | FUNC(0)) /* no pullup option */
+#define GPE15_IICSDA (PIN(4,15) | FUNC(2)) /* no pullup option */
+#define GPE15_GPIO (PIN(4,15) | FUNC(0)) /* no pullup option */
+
+/*
+ * Group 1: GPIO 160...191
+ * Used GPIO: 0...7
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPF0_EINT0 (PIN(5,0) | FUNC(2) | PU)
+#define GPF0_GPIO (PIN(5,0) | FUNC(0) | PU)
+#define GPF1_EINT1 (PIN(5,1) | FUNC(2) | PU)
+#define GPF1_GPIO (PIN(5,1) | FUNC(0) | PU)
+#define GPF2_EINT2 (PIN(5,2) | FUNC(2) | PU)
+#define GPF2_GPIO (PIN(5,2) | FUNC(0) | PU)
+#define GPF3_EINT3 (PIN(5,3) | FUNC(2) | PU)
+#define GPF3_GPIO (PIN(5,3) | FUNC(0) | PU)
+#define GPF4_EINT4 (PIN(5,4) | FUNC(2) | PU)
+#define GPF4_GPIO (PIN(5,4) | FUNC(0) | PU)
+#define GPF5_EINT5 (PIN(5,5) | FUNC(2) | PU)
+#define GPF5_GPIO (PIN(5,5) | FUNC(0) | PU)
+#define GPF6_EINT6 (PIN(5,6) | FUNC(2) | PU)
+#define GPF6_GPIO (PIN(5,6) | FUNC(0) | PU)
+#define GPF7_EINT7 (PIN(5,7) | FUNC(2) | PU)
+#define GPF7_GPIO (PIN(5,7) | FUNC(0) | PU)
+
+/*
+ * Group 1: GPIO 192..223
+ * Used GPIO: 0...15
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPG0_EINT8 (PIN(6,0) | FUNC(2) | PU)
+#define GPG0_GPIO (PIN(6,0) | FUNC(0) | PU)
+#define GPG1_EINT9 (PIN(6,1) | FUNC(2) | PU)
+#define GPG1_GPIO (PIN(6,1) | FUNC(0) | PU)
+#define GPG2_EINT10 (PIN(6,2) | FUNC(2) | PU)
+#define GPG2_NSS0 (PIN(6,2) | FUNC(3) | PU)
+#define GPG2_GPIO (PIN(6,2) | FUNC(0) | PU)
+#define GPG3_EINT11 (PIN(6,3) | FUNC(2) | PU)
+#define GPG3_NSS1 (PIN(6,3) | FUNC(3) | PU)
+#define GPG3_GPIO (PIN(6,3) | FUNC(0) | PU)
+#define GPG4_EINT12 (PIN(6,4) | FUNC(2) | PU)
+#define GPG4_LCD_PWREN (PIN(6,4) | FUNC(3) | PU)
+#define GPG4_GPIO (PIN(6,4) | FUNC(0) | PU)
+#define GPG5_EINT13 (PIN(6,5) | FUNC(2) | PU)
+#define GPG5_SPIMISO1 (PIN(6,5) | FUNC(3) | PU)
+#define GPG5_GPIO (PIN(6,5) | FUNC(0) | PU)
+#define GPG6_EINT14 (PIN(6,6) | FUNC(2) | PU)
+#define GPG6_SPIMOSI1 (PIN(6,6) | FUNC(3) | PU)
+#define GPG6_GPIO (PIN(6,6) | FUNC(0) | PU)
+#define GPG7_EINT15 (PIN(6,7) | FUNC(2) | PU)
+#define GPG7_SPICLK1 (PIN(6,7) | FUNC(3) | PU)
+#define GPG7_GPIO (PIN(6,7) | FUNC(0) | PU)
+#define GPG8_EINT16 (PIN(6,8) | FUNC(2) | PU)
+#define GPG8_GPIO (PIN(6,8) | FUNC(0) | PU)
+#define GPG9_EINT17 (PIN(6,9) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPG9_NRTS1 (PIN(6,9) | FUNC(3) | PU)
+#endif
+#define GPG9_GPIO (PIN(6,9) | FUNC(0) | PU)
+#define GPG10_EINT18 (PIN(6,10) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2440
+# define GPG10_NCTS1 (PIN(6,10) | FUNC(3) | PU)
+#endif
+#define GPG10_GPIO (PIN(6,10) | FUNC(0) | PU)
+#define GPG11_EINT19 (PIN(6,11) | FUNC(2) | PU)
+#define GPG11_TCLK (PIN(6,11) | FUNC(3) | PU)
+#define GPG11_GPIO (PIN(6,11) | FUNC(0) | PU)
+#define GPG12_EINT20 (PIN(6,12) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2410
+# define GPG12_XMON (PIN(6,12) | FUNC(3) | PU)
+#endif
+#define GPG12_GPIO (PIN(6,12) | FUNC(0) | PU)
+#define GPG13_EINT21 (PIN(6,13) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2410
+# define GPG13_NXPON (PIN(6,13) | FUNC(3) | PU)
+#endif
+#define GPG13_GPIO (PIN(6,13) | FUNC(0) | PU) /* must be input in NAND boot mode */
+#define GPG14_EINT22 (PIN(6,14) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2410
+# define GPG14_YMON (PIN(6,14) | FUNC(3) | PU)
+#endif
+#define GPG14_GPIO (PIN(6,14) | FUNC(0) | PU) /* must be input in NAND boot mode */
+#define GPG15_EINT23 (PIN(6,15) | FUNC(2) | PU)
+#ifdef CONFIG_CPU_S3C2410
+# define GPG15_YPON (PIN(6,15) | FUNC(3) | PU)
+#endif
+#define GPG15_GPIO (PIN(6,15) | FUNC(0) | PU) /* must be input in NAND boot mode */
+
+/*
+ * Group 1: GPIO 224..255
+ * Used GPIO: 0...15
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPH0_NCTS0 (PIN(7,0) | FUNC(2) | PU)
+#define GPH0_GPIO (PIN(7,0) | FUNC(0) | PU)
+#define GPH1_NRTS0 (PIN(7,1) | FUNC(2) | PU)
+#define GPH1_GPIO (PIN(7,1) | FUNC(0) | PU)
+#define GPH2_TXD0 (PIN(7,2) | FUNC(2) | PU)
+#define GPH2_GPIO (PIN(7,2) | FUNC(0) | PU)
+#define GPH3_RXD0 (PIN(7,3) | FUNC(2) | PU)
+#define GPH3_GPIO (PIN(7,3) | FUNC(0) | PU)
+#define GPH4_TXD1 (PIN(7,4) | FUNC(2) | PU)
+#define GPH4_GPIO (PIN(7,4) | FUNC(0) | PU)
+#define GPH5_RXD1 (PIN(7,5) | FUNC(2) | PU)
+#define GPH5_GPIO (PIN(7,5) | FUNC(0) | PU)
+#define GPH6_TXD2 (PIN(7,6) | FUNC(2) | PU)
+#define GPH6_NRTS1 (PIN(7,6) | FUNC(3) | PU)
+#define GPH6_GPIO (PIN(7,6) | FUNC(0) | PU)
+#define GPH7_RXD2 (PIN(7,7) | FUNC(2) | PU)
+#define GPH7_NCTS1 (PIN(7,7) | FUNC(3) | PU)
+#define GPH7_GPIO (PIN(7,7) | FUNC(0) | PU)
+#define GPH8_UEXTCLK (PIN(7,8) | FUNC(2) | PU)
+#define GPH8_GPIO (PIN(7,8) | FUNC(0) | PU)
+#define GPH9_CLOCKOUT0 (PIN(7,9) | FUNC(2) | PU)
+#define GPH9_GPIO (PIN(7,9) | FUNC(0) | PU)
+#define GPH10_CLKOUT1 (PIN(7,10) | FUNC(2) | PU)
+#define GPH10_GPIO (PIN(7,10) | FUNC(0) | PU)
+
+#ifdef CONFIG_CPU_S3C2440
+/*
+ * Group 1: GPIO 256..287
+ * Used GPIO: 0...12
+ * These pins can also act as GPIO inputs/outputs
+ */
+#define GPJ0_CAMDATA0 (PIN(8,0) | FUNC(2) | PU)
+#define GPJ0_GPIO (PIN(8,0) | FUNC(0) | PU)
+#define GPJ1_CAMDATA1 (PIN(8,1) | FUNC(2) | PU)
+#define GPJ1_GPIO (PIN(8,1) | FUNC(0) | PU)
+#define GPJ2_CAMDATA2 (PIN(8,2) | FUNC(2) | PU)
+#define GPJ2_GPIO (PIN(8,2) | FUNC(0) | PU)
+#define GPJ3_CAMDATA3 (PIN(8,3) | FUNC(2) | PU)
+#define GPJ3_GPIO (PIN(8,3) | FUNC(0) | PU)
+#define GPJ4_CAMDATA4 (PIN(8,4) | FUNC(2) | PU)
+#define GPJ4_GPIO (PIN(8,4) | FUNC(0) | PU)
+#define GPJ5_CAMDATA5 (PIN(8,5) | FUNC(2) | PU)
+#define GPJ5_GPIO (PIN(8,5) | FUNC(0) | PU)
+#define GPJ6_CAMDATA6 (PIN(8,6) | FUNC(2) | PU)
+#define GPJ6_GPIO (PIN(8,6) | FUNC(0) | PU)
+#define GPJ7_CAMDATA7 (PIN(8,7) | FUNC(2) | PU)
+#define GPJ7_GPIO (PIN(8,7) | FUNC(0) | PU)
+#define GPJ8_CAMPCLK (PIN(8,8) | FUNC(2) | PU)
+#define GPJ8_GPIO (PIN(8,8) | FUNC(0) | PU)
+#define GPJ9_CAMVSYNC (PIN(8,9) | FUNC(2) | PU)
+#define GPJ9_GPIO (PIN(8,9) | FUNC(0) | PU)
+#define GPJ10_CAMHREF (PIN(8,10) | FUNC(2) | PU)
+#define GPJ10_GPIO (PIN(8,10) | FUNC(0) | PU)
+#define GPJ11_CAMCLKOUT (PIN(8,11) | FUNC(2) | PU)
+#define GPJ11_GPIO (PIN(8,11) | FUNC(0) | PU)
+#define GPJ12_CAMRESET (PIN(8,12) | FUNC(0) | PU)
+#define GPJ12_GPIO (PIN(8,12) | FUNC(0) | PU)
+
+#endif
+
+#endif /* __MACH_IOMUX_S3C24x0_H */
Index: barebox-2010.10.0/arch/arm/mach-s3c24xx/Makefile
===================================================================
--- barebox-2010.10.0.orig/arch/arm/mach-s3c24xx/Makefile
+++ barebox-2010.10.0/arch/arm/mach-s3c24xx/Makefile
@@ -1,2 +1,2 @@
-obj-y += generic.o
+obj-y += generic.o gpio-s3c24x0.o
obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
Index: barebox-2010.10.0/arch/arm/Kconfig
===================================================================
--- barebox-2010.10.0.orig/arch/arm/Kconfig
+++ barebox-2010.10.0/arch/arm/Kconfig
@@ -59,6 +59,7 @@ config ARCH_OMAP
config ARCH_S3C24xx
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select CPU_ARM920T
+ select GENERIC_GPIO
endchoice
More information about the barebox
mailing list