[PATCH] Add GPIO support and GPIO setup features to the S3C processors
Sascha Hauer
s.hauer at pengutronix.de
Thu Oct 21 16:09:02 EDT 2010
On Mon, Oct 18, 2010 at 06:43:39PM +0200, Juergen Beisert wrote:
> From: Juergen Beisert <juergen at kreuzholzen.de>
> Subject: Add GPIO support and GPIO setup features to the S3C processors
>
> This patch adds genetic GPIO support to all S3C2440 processor based systems.
> Also it adds definitions to setup the pin multiplexer in a way the other
> architectures do.
>
> Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
>
> Signed-off-by: Juergen Beisert <juergen at kreuzholzen.de>
>
> ---
> arch/arm/Kconfig | 1
> arch/arm/mach-s3c24xx/Makefile | 2
> arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 170 ++++++++
> arch/arm/mach-s3c24xx/include/mach/gpio.h | 31 +
> arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h | 426 +++++++++++++++++++++
> 5 files changed, 629 insertions(+), 1 deletion(-)
>
> Index: barebox-2010.10.0/arch/arm/mach-s3c24xx/gpio-s3c24x0.c
> ===================================================================
> --- /dev/null
> +++ barebox-2010.10.0/arch/arm/mach-s3c24xx/gpio-s3c24x0.c
> @@ -0,0 +1,170 @@
> +/*
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <mach/s3c24x0-iomap.h>
> +#include <mach/gpio.h>
> +
> +static const unsigned char group_offset[] =
> +{
> + 0x00, /* GPA */
> + 0x10, /* GPB */
> + 0x20, /* GPC */
> + 0x30, /* GPD */
> + 0x40, /* GPE */
> + 0x50, /* GPF */
> + 0x60, /* GPG */
> + 0x70, /* GPH */
> +#ifdef CONFIG_CPU_S3C2440
> + 0xd0, /* GPJ */
> +#endif
> +};
> +
> +void gpio_set_value(unsigned gpio, int value)
> +{
> + unsigned group = gpio >> 5;
> + unsigned bit = gpio % 32;
> + unsigned offset;
> + uint32_t reg;
> +
> + offset = group_offset[group];
> +
> + reg = readl(GPADAT + offset);
> + reg &= ~(1 << bit);
> + reg |= (!!value) << bit;
> + writel(reg, GPADAT + offset);
> +}
> +
> +int gpio_direction_input(unsigned gpio)
> +{
> + unsigned group = gpio >> 5;
> + unsigned bit = gpio % 32;
> + unsigned offset;
> + uint32_t reg;
> +
> + offset = group_offset[group];
> +
> + reg = readl(GPACON + offset);
> + reg &= ~(0x3 << (bit << 1));
> + writel(reg, GPACON + offset);
> +
> + return 0;
> +}
> +
> +
> +int gpio_direction_output(unsigned gpio, int value)
> +{
> + unsigned group = gpio >> 5;
> + unsigned bit = gpio % 32;
> + unsigned offset;
> + uint32_t reg;
> +
> + offset = group_offset[group];
> +
> + /* value */
> + reg = readl(GPADAT + offset);
> + reg &= ~(1 << bit);
> + reg |= (!!value) << bit;
> + writel(reg, GPADAT + offset);
You can call gpio_set_value here.
> +
> + /* direction */
> + if (group == 0) { /* GPA is special */
> + reg = readl(GPACON);
> + reg &= ~(1 << bit);
> + writel(reg, GPACON);
> + } else {
gpio_direction_input does not have this special handling. Is this
correct?
> + reg = readl(GPACON + offset);
> + reg &= ~(0x3 << (bit << 1));
> + reg |= 0x1 << (bit << 1);
> + writel(reg, GPACON + offset);
> + }
> +
> + return 0;
> +}
> +
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list