[PATCH 10/10] ARM pca100: Add mci support

[Juergen Beisert]

From: Sascha Hauer <s.hauer at pengutronix.de>

Add mci support to the PCA100 platform

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/phycard-i.MX27/pca100.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 7328a6c..7460c00 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -109,6 +109,11 @@ static void pca100_usbh_init(void)
 }
 #endif
 
+static struct device_d mmc_dev = {
+	.name		= "imx-mmc",
+	.map_base	= 0x10014000,
+};
+
 #ifdef CONFIG_MMU
 static void pca100_mmu_init(void)
 {
@@ -180,8 +185,17 @@ static int pca100_devices_init(void)
 		PD23_AF_USBH2_DATA2,
 		PD24_AF_USBH2_DATA1,
 		PD26_AF_USBH2_DATA5,
+		/* SDHC */
+		PB4_PF_SD2_D0,
+		PB5_PF_SD2_D1,
+		PB6_PF_SD2_D2,
+		PB7_PF_SD2_D3,
+		PB8_PF_SD2_CMD,
+		PB9_PF_SD2_CLK,
 	};
 
+	PCCR0 |= PCCR0_SDHC2_EN;
+
 	/* disable the usb phys */
 	imx_gpio_mode((GPIO_PORTB | 23) | GPIO_GPIO | GPIO_IN);
 	gpio_direction_output(GPIO_PORTB + 23, 1);
@@ -195,6 +209,7 @@ static int pca100_devices_init(void)
 	register_device(&nand_dev);
 	register_device(&sdram_dev);
 	register_device(&fec_dev);
+	register_device(&mmc_dev);
 
 	PCCR1 |= PCCR1_PERCLK2_EN;
 
-- 
1.7.2.3