May 2011 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun May 1 02:05:46 EDT 2011
Ending: Fri May 13 05:11:23 EDT 2011
Messages: 1227

• [alsa-devel] [PATCH] ASoC: omap-mcbsp: Remove restrictive checks for cpu type   Peter Ujfalusi
• [ARM]crash on 2.6.35.11   Catalin Marinas
• [GIT PULL 0/3] TrimSlice updates for 2.6.40   Mike Rapoport
• [GIT PULL 1/3] ARM: tegra: trimslice: register i2c busses and devices   Stephen Warren
• [GIT PULL 1/3] ARM: tegra: trimslice: register i2c busses and devices   mike at compulab.co.il
• [GIT PULL 1/3] ARM: tegra: trimslice: register i2c busses and devices   Mike Rapoport
• [GIT PULL 2/3] ARM: tegra: trimslice: add audio devices and clocks   Mike Rapoport
• [GIT PULL 3/3] ARM: tegra: trimslice: enable USB ports   Mike Rapoport
• [GIT PULL] GIC FastEOI changes for 2.6.40   Will Deacon
• [GIT PULL] OMAP hwmod/PRCM/clock: patches for 2.6.39-rc   Paul Walmsley
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   David Brown
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Laurent Pinchart
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Laurent Pinchart
• [Linaro-mm-sig] [RFC] ARM DMA mapping TODO, v1   Arnd Bergmann
• [PATCH 0/2 v2] OMAP2+: hwmod: Add hwmod's API's for pad wakeup   Govindraj.R
• [PATCH 0/2 v3] OMAP2+: hwmod: Add hwmod's API's for pad wakeup   Govindraj.R
• [PATCH 0/2] Consolidate zone adjustment   Russell King - ARM Linux
• [PATCH 0/2] OMAP2+: hwmod: Add hwmod's API's for pad wakeup   Govindraj.R
• [PATCH 0/3] ARM: Removing ARCH_S5P6442   Kukjin Kim
• [patch 0/4] [RFC] mcount address adjustment   Rabin Vincent
• [patch 0/4] [RFC] mcount address adjustment   Martin Schwidefsky
• [patch 0/4] [RFC] mcount address adjustment   Rabin Vincent
• [PATCH 0/4] omap: cleanup board files   Mike Rapoport
• [PATCH 0/4] omap: cleanup board files   Tony Lindgren
• [PATCH 0/4] omap: cleanup board files   Tony Lindgren
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Pinmux subsystem   Russell King - ARM Linux
• [PATCH 0/4] Pinmux subsystem   Andrew Lunn
• [PATCH 0/4] Pinmux subsystem   Valdis.Kletnieks at vt.edu
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Pinmux subsystem   Russell King - ARM Linux
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Pinmux subsystem   Andrew Lunn
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Pinmux subsystem   Andrew Lunn
• [PATCH 0/4] Pinmux subsystem   Sascha Hauer
• [PATCH 0/4] Pinmux subsystem   Tony Lindgren
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Pinmux subsystem   Matthieu Castet
• [PATCH 0/4] Pinmux subsystem   Linus Walleij
• [PATCH 0/4] Tegra irq cleanups   Colin Cross
• [PATCH 0/4] Tegra irq cleanups   Colin Cross
• [PATCH 0/5] convert stmp into mxs and delete the then obsolete platform   Sascha Hauer
• [PATCH 0/6] drop IRQF_DISABLED from RTC, then convert stmp-rtc to mach-mxs   Wolfram Sang
• [PATCH 0/7] ARM: Removing ARCH_S5PC100   Kukjin Kim
• [PATCH 00/13] Consolidate simple ARM MMIO clock sources   Russell King - ARM Linux
• [PATCH 00/14] Consolidate orion platform data code   Andrew Lunn
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Tony Lindgren
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Linus Walleij
• [PATCH 00/22] omap_hsmmc patches   Adrian Hunter
• [PATCH 01/10] Add a common struct clk   Rob Herring
• [PATCH 01/10] Add a common struct clk   Jeremy Kerr
• [PATCH 01/10] Add a common struct clk   Rob Herring
• [PATCH 01/10] Add a common struct clk   Jeremy Kerr
• [PATCH 01/10] Add a common struct clk   Rob Herring
• [PATCH 01/10] Add a common struct clk   David Brown
• [PATCH 01/10] Add a common struct clk   Stephen Boyd
• [PATCH 01/10] Add a common struct clk   Russell King - ARM Linux
• [PATCH 01/10] Add a common struct clk   Saravana Kannan
• [PATCH 01/10] Add a common struct clk   Sascha Hauer
• [PATCH 01/10] Add a common struct clk   Saravana Kannan
• [PATCH 01/10] Add a common struct clk   Paul Walmsley
• [PATCH 01/10] Add a common struct clk   Saravana Kannan
• [PATCH 01/13] Make clocksource name const   Russell King - ARM Linux
• [PATCH 01/14] [Orion] Rename some constants to macros to make code more identical   saeed bishara
• [PATCH 01/14] [Orion] Rename some constants to macros to make code more identical   Andrew Lunn
• [PATCH 01/22] OMAP: sDMA: descriptor autoloading feature   Adrian Hunter
• [PATCH 01/22] OMAP: sDMA: descriptor autoloading feature   Tony Lindgren
• [PATCH 02/13] ARM: s5p: consolidate selection of timer register   Russell King - ARM Linux
• [PATCH 02/13] ARM: s5p: consolidate selection of timer register   Kukjin Kim
• [PATCH 02/14] [orion] Consolidate the creation of the uart platform data.   Andrew Lunn
• [PATCH 02/15] OMAP: GPIO: remove MPUIO handling from _clear_gpio_irqbank()   Kevin Hilman
• [PATCH 02/22] OMAP: DMA: add omap_dma_has_sglist()   Adrian Hunter
• [PATCH 03/13] ARM: omap1: delete useless interrupt handler   Russell King - ARM Linux
• [PATCH 03/13] ARM: omap1: delete useless interrupt handler   Kevin Hilman
• [PATCH 03/13] ARM: omap1: delete useless interrupt handler   Tony Lindgren
• [PATCH 03/14] [orion] Consolidate the creation of the RTC platform data.   saeed bishara
• [PATCH 03/14] [orion] Consolidate the creation of the RTC platform data.   Andrew Lunn
• [PATCH 03/14] [orion] Consolidate the creation of the RTC platform data.   Andrew Lunn
• [PATCH 03/22] OMAP: DMA: Ensure the sglist registers are cleared   Adrian Hunter
• [PATCH 04/13] ARM: omap1: convert to using readl/writel instead of volatile struct   Tony Lindgren
• [PATCH 04/13] ARM: omap1: convert to using readl/writel instead of volatile struct   Russell King - ARM Linux
• [PATCH 04/14] [orion] Consolidate ethernet platform data   Andrew Lunn
• [PATCH 04/14] [orion] Consolidate ethernet platform data   saeed bishara
• [PATCH 04/14] [orion] Consolidate ethernet platform data   Andrew Lunn
• [PATCH 04/22] mmc: omap hsmmc: adaptation of sdma descriptor   Adrian Hunter
• [PATCH 05/10] clk: Add support for simple dividers   Sascha Hauer
• [PATCH 05/10] clk: Add support for simple dividers   Saravana Kannan
• [PATCH 05/10] clk: Add support for simple dividers   Uwe Kleine-König
• [PATCH 05/13] ARM: update sa1100 to reflect PXA updates   Russell King - ARM Linux
• [PATCH 05/14] [orion] Consolidate I2C initialization.   Andrew Lunn
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91: use structure to store the current soc   Russell King - ARM Linux
• [PATCH 05/22] mmc: omap_hsmmc: fix dma sglist use   Adrian Hunter
• [PATCH 06/13 v2] clocksource: add common mmio clocksource   Russell King - ARM Linux
• [PATCH 06/13] clocksource: add common mmio clocksource   Russell King - ARM Linux
• [PATCH 06/13] clocksource: add common mmio clocksource   Sascha Hauer
• [PATCH 06/13] clocksource: add common mmio clocksource   Russell King - ARM Linux
• [PATCH 06/13] clocksource: add common mmio clocksource   Russell King - ARM Linux
• [PATCH 06/13] clocksource: add common mmio clocksource   viresh kumar
• [PATCH 06/13] clocksource: add common mmio clocksource   Tony Lindgren
• [PATCH 06/13] clocksource: add common mmio clocksource   Thomas Gleixner
• [PATCH 06/14] [orion] Consolidate SPI initialization.   Andrew Lunn
• [PATCH 06/22] mmc: omap_hsmmc: limit scatterlist size for sDMA autoloading   Adrian Hunter
• [PATCH 07/13] clocksource: convert ARM 32-bit up counting clocksources   Linus Walleij
• [PATCH 07/13] clocksource: convert ARM 32-bit up counting clocksources   Hans J. Koch
• [PATCH 07/13] clocksource: convert ARM 32-bit up counting clocksources   Russell King - ARM Linux
• [PATCH 07/13] clocksource: convert ARM 32-bit up counting clocksources   Russell King - ARM Linux
• [PATCH 07/13] clocksource: convert ARM 32-bit up counting clocksources   Hans J. Koch
• [PATCH 07/13] clocksource: convert ARM 32-bit up counting clocksources   Russell King - ARM Linux
• [PATCH 07/14] [orion] Consolidate the platform data setup for the watchdog.   Andrew Lunn
• [patch 07/16] arm: omap: Use clocksource based sched_clock   Tony Lindgren
• [PATCH 07/22] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case   Sergei Shtylyov
• [PATCH 07/22] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case   Adrian Hunter
• [PATCH 08/13 v2] clocksource: convert ARM 32-bit down counting clocksources   Russell King - ARM Linux
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Russell King - ARM Linux
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Alessandro Rubini
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Russell King - ARM Linux
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Nicolas Pitre
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Linus Walleij
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Russell King - ARM Linux
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Russell King - ARM Linux
• [PATCH 08/13] clocksource: convert ARM 32-bit down counting clocksources   Nicolas Pitre
• [PATCH 08/14] [orion] Consolidate the XOR platform setup code.   Andrew Lunn
• [PATCH 08/22] mmc: omap_hsmmc: correct debug report error status mnemonics   Adrian Hunter
• [PATCH 08/22] mmc: omap_hsmmc: correct debug report error status mnemonics   S, Venkatraman
• [PATCH 09/13] clocksource: convert W90x900 24-bit down counting clocksource   Russell King - ARM Linux
• [PATCH 09/14] [orion] Consolidate USB platform setup code.   Andrew Lunn
• [PATCH 09/14] at91: switch pit timer to early platform devices   Russell King - ARM Linux
• [PATCH 09/14] at91: switch pit timer to early platform devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/22] mmc: omap_hsmmc: move hardcoded frequency constants to definition block   Adrian Hunter
• [PATCH 1/2 v2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH 1/2 v2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Paul Walmsley
• [PATCH 1/2 v2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Todd Poynor
• [PATCH 1/2 v2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Raja, Govindraj
• [PATCH 1/2 v3] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH 1/2 v3] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Todd Poynor
• [PATCH 1/2 v3] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Raja, Govindraj
• [PATCH 1/2] arm: localtimer: remove duplicated localtimer code   Bryan Wu
• [PATCH 1/2] ARM: remove unneeded check of the cache_is_vipt_nonaliasing()   Saeed Bishara
• [PATCH 1/2] ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS   Russell King - ARM Linux
• [PATCH 1/2] ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS   Catalin Marinas
• [PATCH 1/2] ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS   Nicolas Pitre
• [PATCH 1/2] dmaengine: at_hdmac: set residue as total len in atc_tx_status   Nicolas Ferre
• [PATCH 1/2] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Grant Likely
• [PATCH 1/2] Initial B&N Nook Color (encore) support.   green at linuxhacker.ru
• [PATCH 1/2] Initial B&N Nook Color (encore) support.   Igor Grinberg
• [PATCH 1/2] Initial B&N Nook Color (encore) support.   Mark Brown
• [PATCH 1/2] Initial B&N Nook Color (encore) support.   Oleg Drokin
• [PATCH 1/2] mmci: trigger card detect IRQs on falling and rising edges   Linus Walleij
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Konstantin Porotchkin
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Nicolas Pitre
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Nicolas Pitre
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   saeed bishara
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Haojian Zhuang
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Nicolas Pitre
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   saeed bishara
• [PATCH 1/2] Moving Marvell Dove platform defaults to ARMv7   Nicolas Pitre
• [PATCH 1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH 1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Paul Walmsley
• [PATCH 1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Todd Poynor
• [PATCH 1/2] omap: rx51: Set regulator V28_A always on   Jarkko Nikula
• [PATCH 1/2] omap: rx51: Set regulator V28_A always on   Jarkko Nikula
• [PATCH 1/3] ARM: pxa168: Add support for UART3   Tanmay Upadhyay
• [PATCH 1/3] ARM: S5P6442: Removing ARCH_S5P6442   Kukjin Kim
• [PATCH 1/3] at91: factorize common irq ID   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] i2c: append hardware lock with bus lock   Ben Dooks
• [PATCH 1/3] i2c: append hardware lock with bus lock   Jean Delvare
• [PATCH 1/3] i2c: append hardware lock with bus lock   Ben Dooks
• [PATCH 1/4] arm: pxa3xx: cm-x300: fix V3020 RTC functionality   Igor Grinberg
• [PATCH 1/4] ARM: S3C2416: Add USB Phy register definitions   Heiko Stübner
• [PATCH 1/4] ARM: tegra: irq: convert to gic arch extensions   Colin Cross
• [PATCH 1/4] ARM: tegra: irq: convert to gic arch extensions   Wolfgang Denk
• [PATCH 1/4] ARM: tegra: irq: convert to gic arch extensions   Colin Cross
• [PATCH 1/4] drivers: create a pinmux subsystem   Linus Walleij
• [PATCH 1/4] drivers: create a pinmux subsystem   Joe Perches
• [PATCH 1/4] drivers: create a pinmux subsystem   Stephen Warren
• [PATCH 1/4] drivers: create a pinmux subsystem   Colin Cross
• [PATCH 1/4] drivers: create a pinmux subsystem   Ben Nizette
• [PATCH 1/4] drivers: create a pinmux subsystem   Ben Nizette
• [PATCH 1/4] drivers: create a pinmux subsystem   Tony Lindgren
• [PATCH 1/4] drivers: create a pinmux subsystem   Tony Lindgren
• [PATCH 1/4] drivers: create a pinmux subsystem   Rohit Vaswani
• [PATCH 1/4] drivers: create a pinmux subsystem   Rohit Vaswani
• [PATCH 1/4] drivers: create a pinmux subsystem   Mike Rapoport
• [PATCH 1/4] drivers: create a pinmux subsystem   Mike Rapoport
• [PATCH 1/4] drivers: create a pinmux subsystem   Greg KH
• [PATCH 1/4] drivers: create a pinmux subsystem   Tony Lindgren
• [PATCH 1/4] drivers: create a pinmux subsystem   Tony Lindgren
• [PATCH 1/4] drivers: create a pinmux subsystem   Linus Walleij
• [PATCH 1/4] drivers: create a pinmux subsystem   Joe Perches
• [PATCH 1/4] drivers: create a pinmux subsystem   Mark Brown
• [PATCH 1/4] drivers: create a pinmux subsystem   Linus Walleij
• [PATCH 1/4] drivers: create a pinmux subsystem   Linus Walleij
• [PATCH 1/4] OMAP3: clean-up mach specific cpuidle data structures   jean.pihet at newoldbits.com
• [PATCH 1/4] OMAP3: clean-up mach specific cpuidle data structures   jean.pihet at newoldbits.com
• [PATCH 1/4] omap: consolidate touch screen initialization among different boards   Oleg Drokin
• [PATCH 1/4] omap: consolidate touch screen initialization among different boards   Thomas Weber
• [PATCH 1/4] omap: consolidate touch screen initialization among different boards   Igor Grinberg
• [PATCH 1/5] OMAP3 cpuidle: remove useless SDP specific timings   Kevin Hilman
• [PATCH 1/6] rtc: remove IRQF_DISABLED   Wolfram Sang
• [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints   jean.pihet at newoldbits.com
• [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints   Tony Lindgren
• [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints   Kevin Hilman
• [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints   Tony Lindgren
• [PATCH 1/8] OMAP PM: create a PM layer plugin for per-device constraints   Tony Lindgren
• [PATCH 1/9] at91rm9200: introduce at91rm9200_set_type to specficy cpu package   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/13] clocksource: convert Integrator/AP 16-bit down counting clocksource   Russell King - ARM Linux
• [PATCH 10/14] [orion] Consolidate SATA platform setup.   Andrew Lunn
• [PATCH 10/22] mmc: omap_hsmmc: reduce a bit the error handlers in probe()   Adrian Hunter
• [PATCH 11/13] clocksource: convert SPEAr platforms 16-bit up counting clocksource   Russell King - ARM Linux
• [PATCH 11/13] clocksource: convert SPEAr platforms 16-bit up counting clocksource   viresh kumar
• [PATCH 11/13] clocksource: convert SPEAr platforms 16-bit up counting clocksource   Russell King - ARM Linux
• [PATCH 11/13] clocksource: convert SPEAr platforms 16-bit up counting clocksource   viresh kumar
• [PATCH 11/14] [orion] Consolidate setup of the crypto engine.   Andrew Lunn
• [PATCH 11/22] mmc: omap_hsmmc: split duplicate code to calc_divisor() function   Adrian Hunter
• [PATCH 12/13] clocksource: convert MXS timrotv2 to 32-bit down counting clocksource   Russell King - ARM Linux
• [PATCH 12/14] [orion] Refactor the MPP code. Common code in the orion platform.   Andrew Lunn
• [PATCH 12/22] mmc: omap_hsmmc: introduce start_clock and re-use stop_clock   Adrian Hunter
• [PATCH 13/13] clocksource: convert OMAP1 to 32-bit down counting clocksource   Tony Lindgren
• [PATCH 13/13] clocksource: convert OMAP1 to 32-bit down counting clocksource   Russell King - ARM Linux
• [PATCH 13/14] [dove] Remove mpp.[ch]. They are not used.   Andrew Lunn
• [PATCH 13/14] [dove] Remove mpp.[ch]. They are not used.   saeed bishara
• [PATCH 13/14] [dove] Remove mpp.[ch]. They are not used.   Andrew Lunn
• [PATCH 13/14] [dove] Remove mpp.[ch]. They are not used.   saeed bishara
• [PATCH 13/15] OMAP: GPIO: cleanup _set_gpio_wakeup(), remove ifdefs   Kevin Hilman
• [PATCH 13/22] mmc: omap_hsmmc: fix few bugs when set the clock divisor   Grazvydas Ignotas
• [PATCH 13/22] mmc: omap_hsmmc: fix few bugs when set the clock divisor   Adrian Hunter
• [PATCH 14/13] clocksource: ARM sp804: allow clocksource name to be specified   Russell King - ARM Linux
• [PATCH 14/14] [orion5x] Refactor mpp code to use common orion platform mpp.   Andrew Lunn
• [PATCH 14/14] [orion5x] Refactor mpp code to use common orion platform mpp.   saeed bishara
• [PATCH 14/14] [orion5x] Refactor mpp code to use common orion platform mpp.   Andrew Lunn
• [PATCH 14/22] mmc: omap_hsmmc: split same pieces of code to separate functions   Adrian Hunter
• [PATCH 15/13] clocksource: ARM sp804: obtain sp804 timer rate via clks   Russell King - ARM Linux
• [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once   Kevin Hilman
• [PATCH 15/15] OMAP: GPIO: cleanup show revision, remove cpu_is checks, display only once   Kevin Hilman
• [PATCH 15/22] OMAP: hsmmc: Do not mux the slot if non default muxing is already done   Adrian Hunter
• [PATCH 16/22] OMAP: board-rm680: set MMC nomux flag   Adrian Hunter
• [PATCH 17/22] mmc: omap_hsmmc: ensure pbias configuration is always done   Adrian Hunter
• [PATCH 18/22] mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb   Adrian Hunter
• [PATCH 19/22] OMAP: hsmmc: implement clock switcher   Adrian Hunter
• [PATCH 19/22] OMAP: hsmmc: implement clock switcher   Grazvydas Ignotas
• [PATCH 2/2 v2] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH 2/2 v3] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH 2/2] Add tps65921 chip   green at linuxhacker.ru
• [PATCH 2/2] ARM: fix the note about dcache lazy flushing for SMP systems   Saeed Bishara
• [PATCH 2/2] arm: localtimer: fix typo in help message   Bryan Wu
• [PATCH 2/2] ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes   Russell King - ARM Linux
• [PATCH 2/2] ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes   Catalin Marinas
• [PATCH 2/2] ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes   Russell King - ARM Linux
• [PATCH 2/2] ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes   Nicolas Pitre
• [PATCH 2/2] dmaengine: at_hdmac: implement pause and resume in atc_control   Nicolas Ferre
• [PATCH 2/2] dmaengine: at_hdmac: implement pause and resume in atc_control   Linus Walleij
• [PATCH 2/2] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Grant Likely
• [PATCH 2/2] mmci: fixup sg buffer handling in mmci_pio_irq.   Linus Walleij
• [PATCH 2/2] mmci: fixup sg buffer handling in mmci_pio_irq.   Russell King - ARM Linux
• [PATCH 2/2] mmci: fixup sg buffer handling in mmci_pio_irq.   Linus Walleij
• [PATCH 2/2] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH 2/2] omap: rx51: Don't power up speaker amplifier at bootup   Jarkko Nikula
• [PATCH 2/2] omap: rx51: Don't power up speaker amplifier at bootup   Jarkko Nikula
• [PATCH 2/2] pxamci: fix coding style for multi statement conditionals   Antonio Ospite
• [PATCH 2/3] ARM: pxa168: Add support for Ethernet   Tanmay Upadhyay
• [PATCH 2/3] ASoC: Remove to support sound for S5P6442   Kukjin Kim
• [PATCH 2/3] ASoC: Remove to support sound for S5P6442   Jassi Brar
• [PATCH 2/3] at91: drop boot_params   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] arm: pxa3xx: cm-x300: GPIO cleanup   Igor Grinberg
• [PATCH 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.   Heiko Stübner
• [PATCH 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.   Sergei Shtylyov
• [PATCH 2/4] ARM: tegra: irq: Remove PM support   Colin Cross
• [PATCH 2/4] OMAP3: cpuidle: re-organize the C-states data   jean.pihet at newoldbits.com
• [PATCH 2/4] OMAP3: cpuidle: re-organize the C-states data   Kevin Hilman
• [PATCH 2/4] OMAP3: cpuidle: re-organize the C-states data   jean.pihet at newoldbits.com
• [PATCH 2/4] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 2/4] pinmux: add a driver for the U300 pinmux   Joe Perches
• [PATCH 2/4] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 2/4] pinmux: add a driver for the U300 pinmux   Joe Perches
• [PATCH 2/4] pinmux: add a driver for the U300 pinmux   Josh Cartwright
• [PATCH 2/5] OMAP3: clean-up mach specific cpuidle data structures   Kevin Hilman
• [PATCH 2/6] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Colin Cross
• [PATCH 2/6] ARM: tegra: update GPIO chained IRQ handler to use entry/exit functions   Will Deacon
• [PATCH 2/6] rtc: stmp3xxx: get rid of platform-specific register include   Wolfram Sang
• [PATCH 2/7] ASoC: Remove to support sound for S5PC100   Kukjin Kim
• [PATCH 2/7] ASoC: Remove to support sound for S5PC100   Jassi Brar
• [PATCH 2/7] ASoC: Remove to support sound for S5PC100   Kukjin Kim
• [PATCH 2/7] ASoC: Remove to support sound for S5PC100   Jassi Brar
• [PATCH 2/8] OMAP2+: powerdomain: control power domains next state   jean.pihet at newoldbits.com
• [PATCH 2/9] at91: introduce commom AT91_BASE_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Sergei Shtylyov
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Russell King - ARM Linux
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Russell King - ARM Linux
• [PATCH 20/19] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
• [PATCH 20/22] mmc: omap_hsmmc: adjust host controller clock in regard to current OPP   Adrian Hunter
• [PATCH 21/22] OMAP: hsmmc: add platform data for eMMC hardware reset gpio   Adrian Hunter
• [PATCH 22/22] mmc: omap_hsmmc: add a hardware reset before initialization   Adrian Hunter
• [PATCH 3/3] ARM: pxa168: Add board support for gplugD   Tanmay Upadhyay
• [PATCH 3/3] at91: make PLAT_PHYS_OFFSET depending on !ARM_PATCH_PHYS_VIRT or XIP_KERNEL   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] at91: make PLAT_PHYS_OFFSET depending on !ARM_PATCH_PHYS_VIRT or XIP_KERNEL   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] at91: make PLAT_PHYS_OFFSET depending on !ARM_PATCH_PHYS_VIRT or XIP_KERNEL   Russell King - ARM Linux
• [PATCH 3/3] at91: make PLAT_PHYS_OFFSET depending on !ARM_PATCH_PHYS_VIRT or XIP_KERNEL   Russell King - ARM Linux
• [PATCH 3/3] at91: make PLAT_PHYS_OFFSET depending on !ARM_PATCH_PHYS_VIRT or XIP_KERNEL   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] tty: Remove to support serial for S5P6442   Kukjin Kim
• [PATCH 3/4] amba: request muxing for PrimeCell devices   Linus Walleij
• [PATCH 3/4] arm: pxa3xx: cm-x300: minor style cleanup   Igor Grinberg
• [PATCH 3/4] ARM: tegra: irq: Move legacy_irq.c into irq.c   Colin Cross
• [PATCH 3/4] OMAP3: cpuidle: code rework for improved readability   jean.pihet at newoldbits.com
• [PATCH 3/4] OMAP3: cpuidle: code rework for improved readability   jean.pihet at newoldbits.com
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Oleg Drokin
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Oleg Drokin
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Mike Rapoport
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Tony Lindgren
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Mike Rapoport
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Tony Lindgren
• [PATCH 3/4] omap: move detection of NAND CS to common-board-devices   Oleg Drokin
• [PATCH 3/5] OMAP3: cpuidle: re-organize the C-states data   Kevin Hilman
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Frederic Weisbecker
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Will Drewry
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Ingo Molnar
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Kees Cook
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Ingo Molnar
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   James Morris
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   James Morris
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Ingo Molnar
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   Will Drewry
• [PATCH 3/5] v2 seccomp_filters: Enable ftrace-based system call filtering   James Morris
• [PATCH 3/6] rtc: stmp3xxx: port stmp-functions to mxs-equivalents   Wolfram Sang
• [PATCH 3/7] [media] s5p-fimc: Remove to support fimc for S5PC100   Kukjin Kim
• [PATCH 3/7] [media] s5p-fimc: Remove to support fimc for S5PC100   Sylwester Nawrocki
• [PATCH 3/8] OMAP3: powerdomain data: add wake-up latency figures   jean.pihet at newoldbits.com
• [PATCH 3/9] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] arm: pxa3xx: cm-x300: update cm_x300_defconfig   Igor Grinberg
• [PATCH 4/4] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller   Heiko Stübner
• [PATCH 4/4] ARM: tegra: irq: Replace tegra_ack with tegra_eoi   Colin Cross
• [PATCH 4/4] OMAP3: cpuidle: change the power domains modes determination logic   jean.pihet at newoldbits.com
• [PATCH 4/4] OMAP3: cpuidle: change the power domains modes determination logic   jean.pihet at newoldbits.com
• [PATCH 4/4] omap: musb: introduce default baord config   Tony Lindgren
• [PATCH 4/4] omap: musb: introduce default baord config   Felipe Balbi
• [PATCH 4/4] omap: musb: introduce default baord config   Tony Lindgren
• [PATCH 4/4] pinmux: activate pinmux driver, delete old padmux driver   Linus Walleij
• [PATCH 4/5] OMAP3: cpuidle: code rework for improved readability   Kevin Hilman
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Russell King - ARM Linux
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Nicolas Pitre
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Russell King - ARM Linux
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Nicolas Pitre
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Matt Sealey
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Matt Sealey
• [PATCH 4/6] ARM: mxc: don't allow to compile together i.MX51 and i.MX53   Uwe Kleine-König
• [PATCH 4/6] rtc: stmp3xxx: fix crash on boot   Wolfram Sang
• [PATCH 4/7] mtd: OneNAND: Remove to support onenand for S5PC100   Kukjin Kim
• [PATCH 4/8] OMAP2+: omap_hwmod: manage the omap_devices the wake-up latency constraints   jean.pihet at newoldbits.com
• [PATCH 4/9] at91: remove AT91_DBGU offset from dbgu register macro   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] rtc: stmp3xxx: get rid of mach-specific accessors   Wolfram Sang
• [PATCH 5/7] tty: Remove to support serial for S5PC100   Kukjin Kim
• [PATCH 5/8] OMAP: PM CONSTRAINTS: add an enum for the classes of constraint   jean.pihet at newoldbits.com
• [PATCH 5/9] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 5/9] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 5/9] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 5/9] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: use structure to store the current soc   Andrew Victor
• [PATCH 5/9] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: use structure to store the current soc   Nicolas Ferre
• [PATCH 5/9] at91: use structure to store the current soc   Nicolas Ferre
• [PATCH 5/9] at91: use structure to store the current soc   Ryan Mallon
• [PATCH 6/6] rtc: stmp3xxx: remove UIE handlers   Wolfram Sang
• [PATCH 6/7] video: s3c-fb: Remove to support fb for S5PC100   Kukjin Kim
• [PATCH 6/8] OMAP2+: omap_device: implement the constraints management code   Todd Poynor
• [PATCH 6/8] OMAP2+: omap_device: implement the constraints management code   jean.pihet at newoldbits.com
• [PATCH 6/9] at91: move clock subsystem init to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] gpio-vbus: ask for vbus_draw regulator before registering xceiv   Greg KH
• [PATCH 7/7] libata: Remove to support pata for S5PC100   Kukjin Kim
• [PATCH 7/7] libata: Remove to support pata for S5PC100   Jeff Garzik
• [PATCH 7/8] OMAP: PM CONSTRAINTS: implement wake-up latency constraints   jean.pihet at newoldbits.com
• [PATCH 7/9] at91: move register clocks to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] OMAP PM: early init of the pwrdms states   jean.pihet at newoldbits.com
• [PATCH 8/9] at91: factorize sram init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] at91: factorize sram init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] at91: add arch specific ioremap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH resend] sdio: optimized SDIO IRQ handling for single function   Per Forlin
• [PATCH RFC] clk: add support for automatic parent handling   Saravana Kannan
• [PATCH RFC] clk: add support for automatic parent handling   Saravana Kannan
• [PATCH RFC] clk: add support for automatic parent handling   Colin Cross
• [PATCH RFC] clk: add support for automatic parent handling   torbenh
• [PATCH v16 01/13] davinci vpbe: V4L2 display driver for DM644X SoC   Laurent Pinchart
• [Patch v1] AM35xx-Craneboard:Update   srinath at mistralsolutions.com
• [Patch v1] AM35xx-Craneboard:Update   Igor Grinberg
• [PATCH v2 0/2] regulator: msm: Add PM8921 regulator driver   Mark Brown
• [PATCH v2 0/2] regulator: msm: Add PM8921 regulator driver   David Collins
• [PATCH v2 0/4] OMAP: cpuidle code clean-up   jean.pihet at newoldbits.com
• [PATCH v2 0/4] s3c2440: mini2440: Add missing code parts to be fully working with latest kernel.   Belisko Marek
• [PATCH v2 0/7] Consolidate sdhci pltfm & OF drivers and get them self registered   Shawn Guo
• [PATCH V2 00/16] omap_hsmmc patches   Adrian Hunter
• [PATCH V2 01/16] mmc: omap_hsmmc: fix missing mmc_release_host() in no_off case   Adrian Hunter
• [PATCH V2 02/16] mmc: omap_hsmmc: correct debug report error status mnemonics   Adrian Hunter
• [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts.   Tony Lindgren
• [PATCH v2 03/12] OMAP2+: Serial: Add default mux for all uarts.   Govindraj
• [PATCH V2 03/16] mmc: omap_hsmmc: move hardcoded frequency constants to definition block   Adrian Hunter
• [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Paul Walmsley
• [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Raja, Govindraj
• [PATCH v2 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH V2 04/16] mmc: omap_hsmmc: reduce a bit the error handlers in probe()   Varadarajan, Charulatha
• [PATCH V2 04/16] mmc: omap_hsmmc: reduce a bit the error handlers in probe()   Andy Shevchenko
• [PATCH V2 04/16] mmc: omap_hsmmc: reduce a bit the error handlers in probe()   Adrian Hunter
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Tony Lindgren
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Russell King - ARM Linux
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Govindraj
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Kevin Hilman
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Govindraj
• [PATCH v2 05/12] OMAP: Serial: Hold console lock for console usage.   Kevin Hilman
• [PATCH V2 05/16] mmc: omap_hsmmc: split duplicate code to calc_divisor() function   Adrian Hunter
• [PATCH V2 06/16] mmc: omap_hsmmc: introduce start_clock and re-use stop_clock   Adrian Hunter
• [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file   Tony Lindgren
• [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file   Tony Lindgren
• [PATCH v2 07/12] OMAP: Serial: Allow UART parameters to be configured from board file   Govindraj
• [PATCH V2 07/16] mmc: omap_hsmmc: fix few bugs when set the clock divisor   Adrian Hunter
• [PATCH V2 08/16] mmc: omap_hsmmc: split same pieces of code to separate functions   Adrian Hunter
• [PATCH V2 09/16] OMAP: hsmmc: Do not mux the slot if non default muxing is already done   Adrian Hunter
• [PATCH v2 1/2] arm: omap: fix bug with multiple smsc911x devices   Igor Grinberg
• [PATCH v2 1/2] arm: omap: fix bug with multiple smsc911x devices   Tony Lindgren
• [PATCH v2 1/2] pxamci: remove the ifdef CONFIG_REGULATOR   Antonio Ospite
• [PATCH v2 1/2] pxamci: remove the ifdef CONFIG_REGULATOR   Mark Brown
• [PATCH v2 1/2] pxamci: remove the ifdef CONFIG_REGULATOR   Chris Ball
• [PATCH v2 1/2] pxamci: remove the ifdef CONFIG_REGULATOR   Antonio Ospite
• [PATCH v2 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   Mark Brown
• [PATCH v2 1/2] regulator: pm8921-regulator: Add regulator driver for PM8921   David Collins
• [PATCH v2 1/3] dmaengine: at_hdmac: set residue as total len in atc_tx_status   Nicolas Ferre
• [PATCH v2 1/7] mmc: sdhci: make sdhci-pltfm device drivers self registered   Anton Vorontsov
• [PATCH v2 1/7] mmc: sdhci: make sdhci-pltfm device drivers self registered   Shawn Guo
• [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.   Kevin Hilman
• [PATCH v2 10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup.   Govindraj
• [PATCH V2 10/16] OMAP: board-rm680: set MMC nomux flag   Adrian Hunter
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Kevin Hilman
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Govindraj
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Kevin Hilman
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Govindraj
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Kevin Hilman
• [PATCH v2 11/12] OMAP: Serial: Use resume call from prcm to enable uart   Govindraj
• [PATCH V2 11/16] mmc: omap_hsmmc: ensure pbias configuration is always done   Adrian Hunter
• [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag.   Kevin Hilman
• [PATCH v2 12/12] OMAP2: Serial: Add no async wake flag.   Govindraj
• [PATCH V2 12/16] mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb   Adrian Hunter
• [PATCH V2 13/16] OMAP: hsmmc: implement clock switcher   Adrian Hunter
• [PATCH V2 13/16] OMAP: hsmmc: implement clock switcher   Tony Lindgren
• [PATCH V2 14/16] mmc: omap_hsmmc: adjust host controller clock in regard to current OPP   Adrian Hunter
• [PATCH V2 15/16] OMAP: hsmmc: add platform data for eMMC hardware reset gpio   Tony Lindgren
• [PATCH V2 15/16] OMAP: hsmmc: add platform data for eMMC hardware reset gpio   Adrian Hunter
• [PATCH V2 16/16] mmc: omap_hsmmc: add a hardware reset before initialization   Adrian Hunter
• [PATCH V2 16/16] mmc: omap_hsmmc: add a hardware reset before initialization   Varadarajan, Charulatha
• [PATCH v2 2/2] arm: omap: gpmc-smsc911x: minor style fixes   Tony Lindgren
• [PATCH v2 2/2] msm: board-8960: Add support for pm8921-regulator   David Collins
• [PATCH v2 2/2] msm: board-8960: Add support for pm8921-regulator   Mark Brown
• [PATCH v2 2/3] ARM: mx5/mx51_babbage: Use gpio_request_one when possible   Sascha Hauer
• [PATCH v2 2/3] dmaengine: at_hdmac: implement pause and resume in atc_control   Nicolas Ferre
• [PATCH v2 2/3] dmaengine: at_hdmac: implement pause and resume in atc_control   Nicolas Ferre
• [PATCH v2 2/7] mmc: sdhci: eliminate sdhci_of_host and sdhci_of_data   Anton Vorontsov
• [PATCH v2 2/7] mmc: sdhci: eliminate sdhci_of_host and sdhci_of_data   Shawn Guo
• [PATCH v2 3/3] dmaengine: at_hdmac: use descriptor chaining help function   Nicolas Ferre
• [PATCH v2 3/7] mmc: sdhci: make sdhci-of device drivers self registered   Shawn Guo
• [PATCH v2 3/7] mmc: sdhci: make sdhci-of device drivers self registered   Anton Vorontsov
• [PATCH v2 3/7] mmc: sdhci: make sdhci-of device drivers self registered   Shawn Guo
• [PATCH v2 4/4] omap: musb: introduce default board config   Felipe Balbi
• [PATCH v2 4/7] sdhci: rename sdhci-esdhc-imx.c to sdhci-esdhc.c   Shawn Guo
• [PATCH v2 5/7] mmc: sdhci: consolidate sdhci-of-esdhc and sdhci-esdhc-imx   Shawn Guo
• [PATCH v2 5/7] mmc: sdhci: consolidate sdhci-of-esdhc and sdhci-esdhc-imx   Anton Vorontsov
• [PATCH v2 6/7] mmc: sdhci: merge two sdhci-pltfm.h into one   Shawn Guo
• [PATCH v2 6/7] mmc: sdhci: merge two sdhci-pltfm.h into one   Anton Vorontsov
• [PATCH v2 7/7] ARM: mxc: remove esdhc.h and use the public one   Shawn Guo
• [PATCH v2 7/7] ARM: mxc: remove esdhc.h and use the public one   Uwe Kleine-König
• [PATCH v2 7/7] ARM: mxc: remove esdhc.h and use the public one   Shawn Guo
• [PATCH v2 FOR 2.6.39] omap: iommu: Return IRQ_HANDLED in fault handler when no fault occured   Laurent Pinchart
• [Patch v2] AM35xx-Craneboard: USB EHCI: Fix USB ECHI PHY reset   srinath at mistralsolutions.com
• [Patch v2] AM35xx-Craneboard:Display: Add DVI and TV Support   srinath at mistralsolutions.com
• [PATCH v2] arm: omap2plus: GPIO cleanup   Igor Grinberg
• [PATCH v2] arm: omap2plus: GPIO cleanup   Igor Grinberg
• [PATCH v2] arm: omap2plus: GPIO cleanup   Tony Lindgren
• [PATCH v2] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH v2] ARM: S3C64XX: Remove gpio-bank-X header files   Kukjin Kim
• [PATCH v2] at91: fix map_io init usage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] genalloc: add support to specify the physical address   Russell King - ARM Linux
• [PATCH V2] genalloc: add support to specify the physical address   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] genalloc: add support to specify the physical address   Andrew Morton
• [PATCH v2] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH v2] kirkwood: add dir-665 support   Simon Guinot
• [PATCH v2] kirkwood: add dir-665 support   saeed bishara
• [PATCH v2] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH v2] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH v2] kirkwood: add dir-665 support   saeed bishara
• [PATCH v2] kirkwood: add dir-665 support   Simon Guinot
• [PATCH v2] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH V2] OMAP2+: SR Layer Cleanup.   Menon, Nishanth
• [PATCH V2] OMAP2+: SR Layer Cleanup.   Gulati, Shweta
• [PATCH v2] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled   Mike Rapoport
• [PATCH v2] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled   Tony Lindgren
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Michał Mirosław
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Nicolas Pitre
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Nicolas Pitre
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v2] sdio: optimized SDIO IRQ handling for single irq   Nicolas Pitre
• [PATCH V2] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/4] OMAP: cpuidle code clean-up   jean.pihet at newoldbits.com
• [PATCH v3 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Heiko Stübner
• [PATCH v3 00/12] mmc: use nonblock mmc requests to minimize latency   Philip Rakity
• [PATCH v3 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v3 00/12] mmc: use nonblock mmc requests to minimize latency   Philip Rakity
• [PATCH v3 00/12] mmc: use nonblock mmc requests to minimize latency   Jaehoon Chung
• [PATCH v3 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v3 00/23] Create common framework for AT91 device initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 01/12] mmc: add none blocking mmc request function   Per Forlin
• [PATCH v3 02/12] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v3 02/12] mmc: mmc_test: add debugfs file to list all tests   Andy Shevchenko
• [PATCH v3 02/12] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v3 03/12] mmc: mmc_test: add test for none blocking transfers   Per Forlin
• [PATCH v3 04/12] mmc: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v3 05/12] mmc: add a block request prepare function   Per Forlin
• [PATCH v3 06/12] mmc: move error code in mmc_block_issue_rw_rq to a separate function.   Per Forlin
• [PATCH v3 07/12] mmc: add a second mmc queue request member   Per Forlin
• [PATCH v3 08/12] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v3 09/12] mmc: test: add random fault injection in core.c   Per Forlin
• [PATCH V3 1/3] ARM: mxs: add GPMI support for imx23/imx28   Huang Shijie
• [PATCH v3 1/5] dmaengine: at_hdmac: modify way to use interrupts   Koul, Vinod
• [PATCH v3 10/12] omap_hsmmc: use original sg_len for dma_unmap_sg   Per Forlin
• [PATCH v3 11/12] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v3 12/12] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations   Catalin Marinas
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations   Santosh Shilimkar
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations   Santosh Shilimkar
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations   Will Deacon
• [PATCH V3] ARM: GIC: Convert GIC library to use the IO relaxed operations   Santosh Shilimkar
• [PATCH v3] ARM: vfp: Always save VFP state in vfp_pm_suspend   Barry Song
• [PATCH v3] ARM: vfp: Always save VFP state in vfp_pm_suspend   Catalin Marinas
• [PATCH v3] ARM: vfp: Always save VFP state in vfp_pm_suspend   Barry Song
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Richard Purdie
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Andrew Morton
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Russell King - ARM Linux
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH v3] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH v3] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M
• [PATCH v3] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Paul Walmsley
• [PATCH v3] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M.
• [PATCH V3] OMAP3+: SR Layer Cleanup   Shweta Gulati
• [PATCH V3] OMAP3+: SR Layer Cleanup   Menon, Nishanth
• [PATCH V3] OMAP3+: SR Layer Cleanup   Todd Poynor
• [PATCH V3] OMAP3+: SR Layer Cleanup   Todd Poynor
• [PATCH V3] OMAP3+: SR Layer Cleanup   Gulati, Shweta
• [PATCH V3] OMAP3+: SR Layer Cleanup   Kevin Hilman
• [PATCH V3] OMAP3+: SR Layer Cleanup   Cousson, Benoit
• [PATCH V3] OMAP3+: SR Layer Cleanup   Gulati, Shweta
• [PATCH V3] OMAP3+: SR Layer Cleanup   Gulati, Shweta
• [PATCH V3] OMAP3+: SR Layer Cleanup   Gulati, Shweta
• [PATCH V3] OMAP3+: SR Layer Cleanup   Menon, Nishanth
• [PATCH v3] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v3] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v3] sdio: optimized SDIO IRQ handling for single irq   Chris Ball
• [PATCH V4 0/5] dmaengine/dw_dmac updates   Viresh Kumar
• [PATCH v4 0/8] OMAP: add PM_CONSTRAINTS framework   jean.pihet at newoldbits.com
• [PATCH V4 00/23] Create common framework for AT91 device initialisation   Ryan Mallon
• [PATCH V4 00/23] Create common framework for AT91 device initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V4 00/23] Create common framework for AT91 device initialisation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V4 00/23] Create common framework for AT91 device initialisation   Ryan Mallon
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Nori, Sekhar
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Subhasish Ghosh
• [PATCH v4 01/11] mfd: add pruss mfd driver.   Arnd Bergmann
• [PATCH V4 01/23] at91: Add common devices framework   Ryan Mallon
• [PATCH V4 02/23] at91: Make Ethernet device common   Ryan Mallon
• [PATCH V4 03/23] at91: Make USB OHCI/EHCI devices common   Ryan Mallon
• [PATCH V4 04/23] at91: Make UDC device common   Ryan Mallon
• [PATCH V4 05/23] at91: Make MMC device common   Ryan Mallon
• [PATCH V4 06/23] at91: Make NAND device common   Ryan Mallon
• [PATCH V4 07/23] at91: Make TWI device common   Ryan Mallon
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Nori, Sekhar
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Alan Cox
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Alan Cox
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Nori, Sekhar
• [PATCH v4 08/11] tty: add pruss SUART driver   Alan Cox
• [PATCH v4 08/11] tty: add pruss SUART driver   Subhasish Ghosh
• [PATCH v4 08/11] tty: add pruss SUART driver   Alan Cox
• [PATCH V4 08/23] at91: Make SPI device common   Ryan Mallon
• [PATCH V4 09/23] at91: Make TCB device common   Ryan Mallon
• [PATCH v4 1/1] can: add pruss CAN driver.   Subhasish Ghosh
• [PATCH v4 1/1] can: add pruss CAN driver.   Arnd Bergmann
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Arnd Bergmann
• [PATCH v4 1/1] can: add pruss CAN driver.   Kurt Van Dijck
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Oliver Hartkopp
• [PATCH v4 1/1] can: add pruss CAN driver.   Subhasish Ghosh
• [PATCH v4 1/1] can: add pruss CAN driver.   Alan Cox
• [PATCH v4 1/1] can: add pruss CAN driver.   Subhasish Ghosh
• [PATCH v4 1/1] can: add pruss CAN driver.   Arnd Bergmann
• [PATCH v4 1/1] can: add pruss CAN driver.   Arnd Bergmann
• [PATCH v4 1/1] can: add pruss CAN driver.   Marc Kleine-Budde
• [PATCH v4 1/1] can: add pruss CAN driver.   Alan Cox
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Wolfgang Grandegger
• [PATCH v4 1/1] can: add pruss CAN driver.   Kurt Van Dijck
• [PATCH v4 1/1] can: add pruss CAN driver.   Arnd Bergmann
• [PATCH v4 1/1] can: add pruss CAN driver.   Marc Kleine-Budde
• [PATCH v4 1/1] can: add pruss CAN driver.   Oliver Hartkopp
• [PATCH v4 1/2] ARM: ELF: Define new core note type for VFP registers   Dave Martin
• [PATCH v4 1/2] ARM: ELF: Define new core note type for VFP registers   Russell King - ARM Linux
• [PATCH v4 1/2] ARM: ELF: Define new core note type for VFP registers   Nicolas Pitre
• [PATCH v4 1/4] OMAP2+: PM: omap device: API's for handling mstandby mode   Paul Walmsley
• [PATCH V4 1/5] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Koul, Vinod
• [PATCH V4 1/5] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   viresh kumar
• [PATCH V4 1/5] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Viresh Kumar
• [PATCH V4 10/23] at91: Make RTT device common   Ryan Mallon
• [PATCH V4 11/23] at91: Make watchdog device common   Ryan Mallon
• [PATCH V4 12/23] at91: Make UART devices common   Ryan Mallon
• [PATCH V4 13/23] at91: Make PWM device common   Ryan Mallon
• [PATCH V4 14/23] at91: Make SSC device common   Ryan Mallon
• [PATCH V4 15/23] at91: Make AC97 device common   Ryan Mallon
• [PATCH V4 16/23] at91: Make LCD controller device common   Ryan Mallon
• [PATCH V4 17/23] at91: Make touchscreen device common   Ryan Mallon
• [PATCH V4 18/23] at91: Make HDMAC device common   Ryan Mallon
• [PATCH V4 19/23] at91: Make RTC device common   Ryan Mallon
• [PATCH V4 2/5] dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS   Viresh Kumar
• [PATCH V4 20/23] at91: Make high speed USB gadget device common   Ryan Mallon
• [PATCH V4 21/23] at91: Make compact flash device common   Ryan Mallon
• [PATCH V4 22/23] at91: Move at91sam9263 CAN device to common devices   Ryan Mallon
• [PATCH V4 23/23] at91: Remove mAgic and ISI device code   Ryan Mallon
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Viresh Kumar
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Koul, Vinod
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Koul, Vinod
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   viresh kumar
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Koul, Vinod
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   viresh kumar
• [PATCH V4 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   viresh kumar
• [PATCH V4 4/5] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback   Viresh Kumar
• [PATCH V4 5/5] dmaengine/dw_dmac: implement pause and resume in dwc_control   Viresh Kumar
• [PATCH v4] ARM: vfp: Always save VFP state in vfp_pm_suspend   Barry Song
• [PATCH v4] leds: provide helper to register "leds-gpio" devices   Uwe Kleine-König
• [PATCH V4] OMAP3+: SR Layer Cleanup   Shweta Gulati
• [PATCH v4] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v4] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v4] sdio: optimized SDIO IRQ handling for single irq   Chris Ball
• [PATCH V5 0/5] dmaengine/dw_dmac updates   Viresh Kumar
• [PATCH v5 00/19] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH v5 01/19] ARM: LPAE: Use long long printk format for displaying the pud   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Russell King - ARM Linux
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Russell King - ARM Linux
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Russell King - ARM Linux
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Russell King - ARM Linux
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Russell King - ARM Linux
• [PATCH v5 02/19] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v5 03/19] ARM: LPAE: Use unsigned long for __phys_to_virt and __virt_to_phys   Russell King - ARM Linux
• [PATCH v5 03/19] ARM: LPAE: Use unsigned long for __phys_to_virt and __virt_to_phys   Catalin Marinas
• [PATCH v5 04/19] ARM: LPAE: Make TTBR1 always point to swapper_pg_dir on ARMv7   Catalin Marinas
• [PATCH v5 05/19] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• [PATCH v5 06/19] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [PATCH v5 07/19] ARM: LPAE: Add (pte|pmd|pgd|pgprot)val_t type definitions as u32   Catalin Marinas
• [PATCH v5 08/19] ARM: LPAE: Use a mask for physical addresses in page table entries   Catalin Marinas
• [PATCH v5 09/19] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH V5 1/5] dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called   Viresh Kumar
• [PATCH v5 10/19] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v5 11/19] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v5 12/19] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v5 13/19] ARM: LPAE: Add context switching support   Catalin Marinas
• [PATCH v5 14/19] ARM: LPAE: Add identity mapping support for the 3-level page table format   Catalin Marinas
• [PATCH v5 15/19] ARM: LPAE: Add support for cpu_v7_do_(suspend|resume)   Catalin Marinas
• [PATCH v5 16/19] ARM: LPAE: Use generic dma_addr_t type definition   Catalin Marinas
• [PATCH v5 17/19] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
• [PATCH v5 18/19] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [PATCH v5 19/19] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH V5 2/5] dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS   Viresh Kumar
• [PATCH v5 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Heiko Stübner
• [PATCH V5 3/5] dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT   Viresh Kumar
• [PATCH V5 4/5] dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback   Viresh Kumar
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Tony Lindgren
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Tony Lindgren
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v5 4/8] arm/dt: probe for platforms via the device tree   Tony Lindgren
• [PATCH V5 5/5] dmaengine/dw_dmac: implement pause and resume in dwc_control   Viresh Kumar
• [PATCH v5] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v5] sdio: optimized SDIO IRQ handling for single irq   Per Forlin
• [PATCH v5] sdio: optimized SDIO IRQ handling for single irq   Chris Ball
• [PATCH v6 0/5] Basic ARM devicetree support   Grant Likely
• [PATCH v6 0/5] Basic ARM devicetree support   Russell King - ARM Linux
• [PATCH v6 0/5] Basic ARM devicetree support   Stephen Rothwell
• [PATCH v6 0/5] Basic ARM devicetree support   Nicolas Pitre
• [PATCH v6 1/5] arm/dt: Make __vet_atags also accept a dtb image   Grant Likely
• [PATCH v6 2/5] arm/dt: Allow CONFIG_OF on ARM   Grant Likely
• [PATCH v6 3/5] arm/dt: consolidate atags setup into setup_machine_atags   Grant Likely
• [PATCH v6 4/5] arm/dt: probe for platforms via the device tree   Grant Likely
• [PATCH v6 5/5] dt: add documentation of ARM dt boot interface   Grant Likely
• [PATCH v6] [ARM] MX1: Add ARMadeus Systems APF9328 board support   Uwe Kleine-König
• [PATCH V6] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH V7] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI)support   Wu, Josh
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI)support   Guennadi Liakhovetski
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI)support   Wu, Josh
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI)support   Wu, Josh
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Russell King - ARM Linux
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Russell King - ARM Linux
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Guennadi Liakhovetski
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Ryan Mallon
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Ryan Mallon
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI) support   Josh Wu
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Uwe Kleine-König
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Russell King - ARM Linux
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Uwe Kleine-König
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Russell King - ARM Linux
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Uwe Kleine-König
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Greg KH
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Russell King - ARM Linux
• [PATCH] [wip] ARM: imx: register "leds-gpio" device using new helper function   H Hartley Sweeten
• [PATCH] [wip] ARM: imx: register "leds-gpio" device using new helper function   H Hartley Sweeten
• [PATCH] [wip] ARM: imx: register "leds-gpio" device using new helper function   Uwe Kleine-König
• [PATCH] [wip] ARM: imx: register "leds-gpio" device using new helper function   Uwe Kleine-König
• [PATCH] Add low level debug and early printk support in BCMRING   JD (Jiandong) Zheng
• [PATCH] ARM: add DT support to the S3C SDI driver   Grant Likely
• [PATCH] arm: Add unwinding support for division functions   Laura Abbott
• [PATCH] ARM: Allow for kernel command line concatenation   oskar.andero at sonyericsson.com
• [PATCH] ARM: Allow for kernel command line concatenation   Uwe Kleine-König
• [PATCH] ARM: Allow for kernel command line concatenation   oskar.andero at sonyericsson.com
• [PATCH] ARM: Do not use__init annotations to declarations   Fabio Estevam
• [PATCH] ARM: Do not use__init annotations to declarations   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS4: Add to support ORIGEN board   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Bugfix Hotplug   MyungJoo Ham
• [PATCH] ARM: EXYNOS4: Bugfix Hotplug   MyungJoo Ham
• [PATCH] ARM: EXYNOS4: Bugfix Hotplug   Russell King - ARM Linux
• [PATCH] arm: exynos4: PM Bugfix for not waking up from suspend-to-RAM   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Suspend to RAM fix   Inderpal Singh
• [PATCH] ARM: imx/mach-apf9328: Simplify UART0 registration   Fabio Estevam
• [PATCH] ARM: imx/mach-apf9328: Simplify UART0 registration   gwenhael.goavec
• [PATCH] ARM: Include Makefile.boot only when it exists   Richard Cochran
• [PATCH] ARM: Include Makefile.boot only when it exists   Richard Cochran
• [PATCH] ARM: Include Makefile.boot only when it exists   Nicolas Pitre
• [PATCH] ARM: Include Makefile.boot only when it exists   Richard Cochran
• [PATCH] ARM: Include Makefile.boot only when it exists   Mark Brown
• [PATCH] ARM: Include Makefile.boot only when it exists   Mark Brown
• [PATCH] arm: kernel: module: Remove the r_offset check which is always false   Maxin John
• [PATCH] arm: mach-imx/mxs: drop 'default' boards   Wolfram Sang
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Tony Lindgren
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Tony Lindgren
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Tony Lindgren
• [PATCH] arm: omap2plus: fix ads7846 pendown gpio request   Igor Grinberg
• [PATCH] arm: omap2plus: fix ads7846 pendown gpio request   Thomas Weber
• [PATCH] arm: omap2plus: fix ads7846 pendown gpio request   Igor Grinberg
• [PATCH] arm: omap2plus: GPIO cleanup mach-omap2/*   Tony Lindgren
• [PATCH] arm: omap2plus: move NAND_BLOCK_SIZE out of boards   Igor Grinberg
• [PATCH] arm: omap2plus: move NAND_BLOCK_SIZE out of boards   Igor Grinberg
• [PATCH] arm: omap3: cm-t3517: fix section mismatch warning   Igor Grinberg
• [PATCH] arm: omap3: cm-t3517: fix section mismatch warning   Igor Grinberg
• [PATCH] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH] arm: omap3: cm-t35: add support for cm-t3730   Mike Rapoport
• [PATCH] ARM: omap4: Enable keypad controller hwmod   Colin Cross
• [PATCH] ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init   Colin Cross
• [PATCH] ARM: S3C6410: Add some lower frequencies for 800MHz base clock operation   Mark Brown
• [PATCH] ARM: S3C6410: Add some lower frequencies for 800MHz base clock operation   Kukjin Kim
• [PATCH] ARM: S3C6410: Support 800MHz operation in cpufreq   Kukjin Kim
• [PATCH] ARM: S5PV210: Fix possible null pointer dereference.   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control   Kukjin Kim
• [PATCH] ARM: Suspend: Fix build error on ARCH_S5PC100   Kukjin Kim
• [PATCH] ARM: Suspend: Fix build error on ARCH_S5PC100   Russell King - ARM Linux
• [PATCH] ARM: Thumb-2: Relax relocation requirements for non-function symbols   Dave Martin
• [PATCH] ARM: twd: Adjust localtimer frequency withcpufreqnotifiers   Linus Walleij
• [PATCH] arm:pm: save the vfp state of last scheduled-out proceed while suspending   Catalin Marinas
• [PATCH] arm:pm: save the vfp state of last scheduled-out proceed while suspending   Barry Song
• [PATCH] ASoC: omap-mcbsp: Remove restrictive checks for cpu type   Sanjeev Premi
• [PATCH] ASoC: omap-mcbsp: Remove restrictive checks for cpu type   Mark Brown
• [PATCH] ASoC: omap-mcbsp: Remove restrictive checks for cpu type   Jarkko Nikula
• [PATCH] AT91: Add external RTC for Flexibity board   Maxim Osipov
• [PATCH] AT91: Add external RTC for Flexibity board   Maxim Osipov
• [PATCH] AT91: Add external RTC for Flexibity board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: Add external RTC for Flexibity board   Andrew Victor
• [PATCH] AT91: Add external RTC for Flexibity board   Nicolas Ferre
• [PATCH] at91sam9260: merge all boards defconfig into only one   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCH] atomic: add *_dec_not_zero   Mike Frysinger
• [PATCH] atomic: add *_dec_not_zero   David Miller
• [PATCH] atomic: add *_dec_not_zero   Ingo Molnar
• [PATCH] atomic: add *_dec_not_zero   David Laight
• [PATCH] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCH] atomic: add *_dec_not_zero   Mike Frysinger
• [PATCH] atomic: add *_dec_not_zero   Jesper Nilsson
• [PATCH] atomic: add *_dec_not_zero   Ralf Baechle
• [PATCH] atomic: add *_dec_not_zero   David Howells
• [PATCH] atomic: add *_dec_not_zero   Chris Metcalf
• [PATCH] atomic: add *_dec_not_zero   Geert Uytterhoeven
• [PATCH] atomic: add *_dec_not_zero   James Bottomley
• [PATCH] atomic: add *_dec_not_zero   Will Deacon
• [PATCH] atomic: add *_dec_not_zero   Matt Turner
• [PATCH] atomic: add *_dec_not_zero   Russell King - ARM Linux
• [PATCH] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCH] atomic: add *_dec_not_zero   Benjamin Herrenschmidt
• [PATCH] atomic: add *_dec_not_zero   Mike Frysinger
• [PATCH] avr32: add some more at91 to cpu.h definition   Nicolas Ferre
• [PATCH] avr32: add some more at91 to cpu.h definition   Hans-Christian Egtvedt
• [PATCH] avr32: add some more at91 to cpu.h definition   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] avr32: add some more at91 to cpu.h definition   Nicolas Ferre
• [PATCH] bcmring: fix dma.c build error   JD (Jiandong) Zheng
• [PATCH] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Mark Brown
• [PATCH] dmaengine: at_hdmac: pause: no need to wait for FIFO empty   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: pause: no need to wait for FIFO empty   Sergei Shtylyov
• [PATCH] dmaengine: at_hdmac: pause: no need to wait for FIFO empty   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: pause: no need to wait for FIFO empty   Koul, Vinod
• [PATCH] dmaengine: at_hdmac: pause: no need to wait for FIFO empty   Koul, Vinod
• [PATCH] dmaengine: at_hdmac: pause: no need to wait for FIFO empty   Nicolas Ferre
• [PATCH] drivers: create a pinmux subsystem v2   Linus Walleij
• [PATCH] drivers: create a pinmux subsystem v2   Jamie Iles
• [PATCH] drivers: create a pinmux subsystem v2   Joe Perches
• [PATCH] fix build warnings on defconfigs   Ralf Baechle
• [PATCH] ftrace: recordmcount: avoid STT_FUNC symbols as base on ARM   Rabin Vincent
• [PATCH] gpio-vbus: ask for vbus_draw regulator before registering xceiv   Dmitry Eremin-Solenikov
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   mike at compulab.co.il
• [PATCH] kirkwood: add dir-665 support   Simon Guinot
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   Mike Rapoport
• [PATCH] kirkwood: add dir-665 support   Mike Rapoport
• [PATCH] kirkwood: add dir-665 support   Simon Guinot
• [PATCH] kirkwood: add dir-665 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] kirkwood: add dir-665 support   Nicolas Pitre
• [PATCH] kirkwood: add dir-665 support   Hirundo Cam
• [PATCH] kirkwood: add dir-665 support   Simon Guinot
• [PATCH] kirkwood: add dir-665 support   Nicolas Pitre
• [PATCH] kirkwood: add dir-665 support   Simon Guinot
• [PATCH] kirkwood: add dir-665 support   Nicolas Pitre
• [PATCH] leds: drop leds-h1940 driver   Kukjin Kim
• [PATCH] leds: drop leds-h1940 driver   Vasily Khoruzhick
• [PATCH] leds: drop leds-h1940 driver   Kukjin Kim
• [PATCH] leds: drop leds-h1940 driver   Vasily Khoruzhick
• [PATCH] lib: Consolidate DEBUG_STACK_USAGE option   Stephen Boyd
• [PATCH] lib: Consolidate DEBUG_STACK_USAGE option   David Miller
• [PATCH] lib: Consolidate DEBUG_STACK_USAGE option   richard -rw- weinberger
• [PATCH] lib: Consolidate DEBUG_STACK_USAGE option   Mike Frysinger
• [PATCH] lib: Consolidate DEBUG_STACK_USAGE option   Ralf Baechle
• [PATCH] mach-ux500: fix SMP secondary startup regression   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Ulf Hansson
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Per Forlin
• [PATCH] mmci: sync DATAEND irq with dma transfer done   Linus Walleij
• [PATCH] mx23: register clocks for mmc   Peter Korsgaard
• [PATCH] mx23: register clocks for mmc   Shawn Guo
• [PATCH] OMAP3: set the core dpll clk rate in its set_rate function.   Paul Walmsley
• [PATCH] OMAP3: set the core dpll clk rate in its set_rate function.   Avinash.H.M
• [PATCH] OMAP4: fix return value of omap4_l3_init   Rabin Vincent
• [PATCH] OMAP4: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'   Tony Lindgren
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Paul Walmsley
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Gulati, Shweta
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Avinash.H.M.
• [PATCH] OMAP: Added recalculation of clock rate in 'clk_set_rate'   Gulati, Shweta
• [PATCH] OMAP: don't trace functions called from sched_clock   Rabin Vincent
• [PATCH] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled   Oleg Drokin
• [PATCH] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled   Tony Lindgren
• [PATCH] omap: fix build when MTD_NAND_OMAP2 and TOUCHSCREEN_ADS7846 are disabled   Mike Rapoport
• [PATCH] omap: iommu: fix pte attributes for super section   Suman Anna
• [PATCH] omap: iommu: fix pte attributes for super section   Anna, Suman
• [PATCH] pxa/hx4700: Add ASIC3 LED support   Philipp Zabel
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Paul Parsons
• [PATCH] pxa/hx4700: Fix basic suspend/resume   Paul Parsons
• [PATCH] pxa: Fix PGSR register address calculation   Paul Parsons
• [PATCH] pxa: Fix PGSR register address calculation   Eric Miao
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Antonio Ospite
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Mark Brown
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Russell King - ARM Linux
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Mark Brown
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Sergei Shtylyov
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Antonio Ospite
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Russell King - ARM Linux
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Mark Brown
• [PATCH] pxamci: remove an ifdef about CONFIG_REGULATOR   Antonio Ospite
• [PATCH] sdio: optimized SDIO IRQ handling for single function   Per Forlin
• [PATCH] sdio: optimized SDIO IRQ handling for single function   Nicolas Pitre
• [PATCH] sdio: optimized SDIO IRQ handling for single function   Per Forlin
• [PATCH] sdio: optimized SDIO IRQ handling for single function   Nicolas Pitre
• [PATCH] sdio: optimized SDIO IRQ handling for single function   Per Forlin
• [PATCH] shmobile: fix map_io init usage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] shmobile: fix map_io init usage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Nicolas Ferre
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Sergei Shtylyov
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Nicolas Ferre
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Sergei Shtylyov
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb/gadget: at91sam9g20 fix end point max packet size   Greg KH
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Julian Calaby
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Arnd Bergmann
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Hauke Mehrtens
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Hauke Mehrtens
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Hauke Mehrtens
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Hauke Mehrtens
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Hauke Mehrtens
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Arnd Bergmann
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Arnd Bergmann
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Arnd Bergmann
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Arnd Bergmann
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai, axi] bcma: add Broadcom specific AMBA bus driver   Greg KH
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Rafał Miłecki
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Michael Büsch
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Arend van Spriel
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Arend van Spriel
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Henry Ptasinski
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Michael Büsch
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   George Kashperko
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Arend van Spriel
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Russell King - ARM Linux
• [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver   Russell King - ARM Linux
• [PATCHv2 3/4] ARM: tegra: irq: Move legacy_irq.c into irq.c   Colin Cross
• [PATCHv2 4/4] ARM: tegra: irq: Add tegra_eoi   Colin Cross
• [PATCHv2 4/4] ARM: tegra: irq: Add tegra_eoi   Will Deacon
• [PATCHv2 4/4] ARM: tegra: irq: Add tegra_eoi   Colin Cross
• [PATCHv2 4/4] ARM: tegra: irq: Add tegra_eoi   Will Deacon
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Tony Lindgren
• [PATCHv3] ARM:boot:device tree: Allow the device tree binary to be appended to zImage   Nicolas Pitre
• [QUERY] Behavior of spi slave memories w.r.t chip select signal.   viresh kumar
• [QUERY] Behavior of spi slave memories w.r.t chip select signal.   Jamie Iles
• [QUERY] Behavior of spi slave memories w.r.t chip select signal.   viresh kumar
• [QUERY] Behavior of spi slave memories w.r.t chip select signal.   viresh kumar
• [QUERY] Behavior of spi slave memories w.r.t chip select signal.   Jamie Iles
• [RESEND PATCH 0/4] omap: merge IGEP v2 and v3   Mike Rapoport
• [RESEND PATCH 0/4] omap: merge IGEP v2 and v3   mike at compulab.co.il
• [RESEND PATCH 1/4] omap: igep0020: name refactoring for future merge with IGEP3   Mike Rapoport
• [RESEND PATCH 2/4] omap: igep0020: minor refactoring   Mike Rapoport
• [RESEND PATCH 3/4] omap: igep0020: add support for IGEP3   Mike Rapoport
• [RESEND PATCH 4/4] omap: drop board-igep0030.c   Mike Rapoport
• [RFC 0/3] ARM: Tegra: Device Tree: i2c & wm8903   John Bonesio
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   Stephen Warren
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   John Bonesio
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   Mark Brown
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   Stephen Warren
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   John Bonesio
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   Stephen Warren
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   John Bonesio
• [RFC 1/2] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   Grant Likely
• [RFC 1/3] ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized   Stephen Warren
• [RFC 2/3] ARM: Tegra: Device Tree Support: Add i2c devices   Stephen Warren
• [RFC 2/3] ARM: Tegra: Device Tree Support: Add i2c devices   Grant Likely
• [RFC 2/3] ARM: Tegra: Device Tree Support: Add i2c devices   Stephen Warren
• [RFC 3/3] ARM:Tegra: Device Tree Support: Initialize from wm8903 the device tree   Stephen Warren
• [RFC 3/3] ARM:Tegra: Device Tree Support: Initialize from wm8903 the device tree   Mark Brown
• [RFC PATCH 0/4] ARM: Basic Xilinx Support   Grant Likely
• [RFC PATCH 03/12] ARM: omap4: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Stephen Boyd
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Jeff Ohlstein
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Stephen Boyd
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Russell King - ARM Linux
• [RFC PATCH 08/12] ARM: msm: use remapped PPI interrupts for local timer   Stephen Boyd
• [RFC PATCH 1/4] arm/dt: Add dt machine definition   Grant Likely
• [RFC PATCH 2/4] of/address: Add of_find_matching_node_by_address helper   Grant Likely
• [RFC PATCH 3/4] dt/irq: add of_irq_domain_add_simple() helper   Grant Likely
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Grant Likely
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Michal Simek
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Arnd Bergmann
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Rob Herring
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Arnd Bergmann
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   johnlinn at comcast.net
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Arnd Bergmann
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   johnlinn at comcast.net
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Russell King - ARM Linux
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Grant Likely
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Arnd Bergmann
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Russell King - ARM Linux
• [RFC PATCH 4/4] ARM: Xilinx: Adding Xilinx board support   Arnd Bergmann
• [RFC PATCH v2 00/12] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [RFC PATCH v2 01/12] ARM: gic: add per-cpu interrupt multiplexer   Marc Zyngier
• [RFC PATCH v2 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [RFC PATCH v2 02/12] ARM: smp_twd: add support for remapped PPI interrupts   Stephen Boyd
• [RFC PATCH v2 03/12] ARM: omap4: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 04/12] ARM: versatile: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 05/12] ARM: shmobile: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 06/12] ARM: ux500: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 07/12] ARM: tegra: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 08/12] ARM: msm: use remapped PPI interrupts for local timer   Stephen Boyd
• [RFC PATCH v2 08/12] ARM: msm: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 09/12] ARM: exynos4: use remapped PPI interrupts for local timer   Marc Zyngier
• [RFC PATCH v2 10/12] ARM: gic: remove previous local timer interrupt handling   Marc Zyngier
• [RFC PATCH v2 11/12] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• [RFC PATCH v2 12/12] ARM: SMP: automatically select ARM_GIC_VPPI   Marc Zyngier
• [RFC PATCH v3] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH v3] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH v3] Consolidate SRAM support   Jean Pihet
• [RFC PATCH v3] Consolidate SRAM support   Russell King - ARM Linux
• [RFC PATCH] arm: add global early device init   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: drop Execute-In-Place   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: drop Execute-In-Place   Vitaly Wool
• [RFC PATCH] arm: drop Execute-In-Place   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: drop Execute-In-Place   Tim Bird
• [RFC PATCH] arm: drop Execute-In-Place   Tim Bird
• [RFC PATCH] arm: drop Execute-In-Place   Nicolas Pitre
• [RFC PATCH] arm: drop Execute-In-Place   Tim Bird
• [RFC PATCH] arm: drop Execute-In-Place   David Woodhouse
• [RFC PATCH] arm: drop Execute-In-Place   Tim Bird
• [RFC PATCH] arm: drop Execute-In-Place   Nicolas Pitre
• [RFC PATCH] arm: drop Execute-In-Place   Mike Frysinger
• [RFC PATCH] arm: drop Execute-In-Place   Tim Bird
• [RFC PATCH] arm: drop Execute-In-Place   Nicolas Pitre
• [RFC PATCH] arm: drop Execute-In-Place   Mike Frysinger
• [RFC PATCH] arm: drop Execute-In-Place   Vitaly Wool
• [RFC PATCH] arm: drop Execute-In-Place   Tim Bird
• [RFC PATCH] arm: drop Execute-In-Place   Mike Frysinger
• [RFC PATCH] arm: drop Execute-In-Place   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: drop Execute-In-Place   Tony Lindgren
• [RFC PATCH] arm: drop Execute-In-Place   Linus Walleij
• [RFC PATCH] arm: move timer init to late_timer_init   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: move timer init to late_timer_init   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: move timer init to late_timer_init   Russell King - ARM Linux
• [RFC PATCH] arm: move timer init to late_timer_init   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: move timer init to late_timer_init   Russell King - ARM Linux
• [RFC PATCH] arm: move timer init to late_timer_init   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH] arm: move timer init to late_timer_init   Russell King - ARM Linux
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Jean Pihet
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Jean Pihet
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Paul Walmsley
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Jean Pihet
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Paul Walmsley
• [RFC] About ARM expansion boards and others things   Igor Grinberg
• [RFC] About ARM expansion boards and others things   Igor Grinberg
• [RFC] ARM DMA mapping TODO, v1   Dave Martin
• [RFC] Generic dma_ops using iommu-api - some thoughts   Joerg Roedel
• [RFC] Generic dma_ops using iommu-api - some thoughts   Marek Szyprowski
• [RFC] Generic dma_ops using iommu-api - some thoughts   Joerg Roedel
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Ilya Yanok
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Jonathan Cameron
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Jonathan Cameron
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Mark Brown
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Jonathan Cameron
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Mark Brown
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Jonathan Cameron
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Ithamar R. Adema
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Mark Brown
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Ithamar R. Adema
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Mark Brown
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Mark Brown
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Ilya Yanok
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Jonathan Cameron
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Jonathan Cameron
• [RFC] What is the preferred way to share ADC unit between hwmon and input(ts) drivers?   Linus Walleij
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Kevin Hilman
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Linus Walleij
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Tony Lindgren
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Linus Walleij
• [v2 0/7] OMAP: GPIO: Use PM runtime framework   Kevin Hilman
• [V2 PATCH 2/2] at91: drop boot_params and PLAT_PHYS_OFFSET   Jean-Christophe PLAGNIOL-VILLARD
• [V3 PATCH] arm: add global early device init   Jean-Christophe PLAGNIOL-VILLARD
• [V3 PATCH] arm: add global early device init   Jean-Christophe PLAGNIOL-VILLARD
• Architecture specific implementations for tickless kernel and deferrable timers   Vikram Narayanan
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Phil Sutter
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Eric Dumazet
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Andrew Lunn
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Phil Sutter
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Phil Sutter
• ARM, AF_PACKET: caching problems on Marvell Kirkwood   Phil Sutter
• ARM: pxa168: Add board support for gplugD   Tanmay Upadhyay
• AT91: Convert RTC and RTT drivers to be independent of processor base-address   Ryan Mallon
• AT91: Convert WDT driver to be independent of processor base-address   Ryan Mallon
• AT91: Convert WDT driver to be independent of processor base-address   Russell King - ARM Linux
• AT91: Convert WDT driver to be independent of processor base-address   Jean-Christophe PLAGNIOL-VILLARD
• AT91: DBGU definitions are processor-dependent   Andrew Victor
• AT91: Interrupt handling independent of processor base-address   Andrew Victor
• AT91: Interrupt handling independent of processor base-address   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Interrupt handling independent of processor base-address   Ryan Mallon
• AT91: Interrupt handling independent of processor base-address   Ryan Mallon
• AT91: Move non-portable processor-specific code out of USB Gadget drivers   Greg KH
• AT91: Move non-portable processor-specific code out of USB Gadget drivers   Andrew Victor
• AT91: Not all processors have 4 programmable clocks   Andrew Victor
• AT91: PIO base-address should be calculated by processor-specific code   Ryan Mallon
• AT91: PMC definitions are plaform-depenent   Andrew Victor
• AT91: PMC definitions are plaform-depenent   Uwe Kleine-König
• AT91: PMC definitions are plaform-depenent   Jean-Christophe PLAGNIOL-VILLARD
• AT91: PMC definitions are plaform-depenent   Andrew Victor
• AT91: PMC definitions are plaform-depenent   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Remove fixed mapping for AT91RM9200 ethernet   Andrew Victor
• AT91: Remove fixed mapping for AT91RM9200 ethernet   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Remove fixed mapping for AT91RM9200 ethernet   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Remove fixed mapping for AT91RM9200 ethernet   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Remove fixed mapping for AT91RM9200 ethernet   Andrew Victor
• AT91: soc init factorisation and fix   Jean-Christophe PLAGNIOL-VILLARD
• AXI driver status => previously: Re: Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arend van Spriel
• AXI driver status => previously: Re: Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Arend van Spriel
• AXI driver status => previously: Re: Could I (ab)use bus (struct bus_type) for virtual Broadcom bus?   Rafał Miłecki
• BUG: sleeping function called from invalid context   Amit Virdi
• BUG: sleeping function called from invalid context   Alan Cox
• Common clock and dvfs   Cousson, Benoit
• Common clock and dvfs   Colin Cross
• Common clock and dvfs   Paul Walmsley
• Common clock and dvfs   Paul Walmsley
• Common clock and dvfs   Colin Cross
• Common clock and dvfs   Mark Brown
• Common clock and dvfs   Cousson, Benoit
• Common clock and dvfs   Colin Cross
• Common clock and dvfs   MyungJoo Ham
• Common clock and dvfs   Paul Walmsley
• console_cpu_notify can cause scheduling BUG during CPU hotplug   Michael Bohan
• dma_alloc_writecombine() and MAX_ORDER   Michael Hunold
• dma_alloc_writecombine() and MAX_ORDER   Russell King - ARM Linux
• Duration of mdelay and udelay depends on MPU frequency in SMP   Saquib
• Duration of mdelay and udelay depends on MPU frequency in SMP   Saquib
• Duration of mdelay and udelay depends on MPU frequency in SMP   Santosh Shilimkar
• ERBE  
• ERBE  
• Error in head-common.S file while ARM Linux booting   Madhavi Manchala
• Error in head-common.S file while ARM Linux booting   Russell King - ARM Linux
• External serial 8250/16550   Paulo Fragoso
• External serial 8250/16550   Paulo Fragoso
• External serial 8250/16550   Paulo Fragoso
• Fwd: [ARM]crash on 2.6.35.11   naveen yadav
• Fwd: [ARM]crash on 2.6.35.11   Russell King - ARM Linux
• genirq: Generic irq chip available in git   Russell King - ARM Linux
• genirq: Generic irq chip available in git   Mark Brown
• genirq: Generic irq chip available in git   Russell King - ARM Linux
• genirq: Generic irq chip available in git   Mark Brown
• genirq: Generic irq chip available in git   Nori, Sekhar
• genirq: Generic irq chip available in git   Russell King - ARM Linux
• genirq: Generic irq chip available in git   Mark Brown
• genirq: Generic irq chip available in git   Russell King - ARM Linux
• Git pull request: switch Dove to ARMv7 mode only   Nicolas Pitre
• Git pull request: zImage fixes   Nicolas Pitre
• How to port linux to my own board?   Frank Xue
• How to port linux to my own board?   Frank Xue
• Initial B&N Nook Color support, take three   green at linuxhacker.ru
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Jamie Lokier
• moving gpio driver to drivers/gpio, how to initialize?   Sascha Hauer
• moving gpio driver to drivers/gpio, how to initialize?   Jamie Iles
• moving gpio driver to drivers/gpio, how to initialize?   Sascha Hauer
• moving gpio driver to drivers/gpio, how to initialize?   Rob Herring
• Patch 6853/1 incorrectly moved to superseeded ?   Viktor Rosendahl
• Patch 6853/1 incorrectly moved to superseeded ?   Nicolas Pitre
• Patch 6853/1 incorrectly moved to superseeded ?   Tixy
• PXA270 DIMM Module (NOR Flash) on v2.6.38   Marek Vasut
• PXA270 DIMM Module (NOR Flash) on v2.6.38   Marek Vasut
• PXA270 DIMM Module (NOR Flash) on v2.6.38   Bas van Tiel
• PXA270 DIMM Module (NOR Flash) on v2.6.38   Marek Vasut
• Question about multi-bank memory usage in ARM platform   os user
• Question about multi-bank memory usage in ARM platform   Jean-Christophe PLAGNIOL-VILLARD
• Resend [PATCH 00/10] ARM: SMP initialization consolidation   Russell King - ARM Linux
• Resend [PATCH 00/10] ARM: SMP initialization consolidation   Arnd Bergmann
• Resend [PATCH 00/10] ARM: SMP initialization consolidation   Russell King - ARM Linux
• Resend [PATCH 00/10] ARM: SMP initialization consolidation   Rob Herring
• Runtime CPU features detection on ARM (/proc/cpuinfo vs. /proc/self/auxv)   Dave Martin
• sleeping function called from invalid context   Amit Virdi
• Re: Soiseek-搜IC 电子工程师每天必上网站   Soiseek - 搜IC
• Status of arch/arm in linux-next   Jamie Lokier
• Status of arch/arm in linux-next   Samuel Ortiz
• Status of arch/arm in linux-next   Linus Walleij
• Tegra gpio driver: Need to configure pins in gpio mode/nontristate with gpio-request   Erik Gilling
• Tegra gpio driver: Need to configure pins in gpio mode/nontristate with gpio-request   Colin Cross
• Tegra gpio driver: Need to configure pins in gpio mode/nontristate with gpio-request   Laxman Dewangan
• Tegra gpio driver: Need to configure pins in gpio mode/nontristate with gpio-request   Colin Cross
• Tegra gpio driver: Need to configure pins in gpio mode/nontristate with gpio-request   Laxman Dewangan
• Tegra gpio driver: Need to configure pins in gpio mode/nontristate with gpio-request   Laxman Dewangan
• Thomas' IRQ patches for Samsung   Mark Brown

Last message date: Fri May 13 05:11:23 EDT 2011
Archived on: Fri May 13 05:18:39 EDT 2011

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...