AT91: Interrupt handling independent of processor base-address
Andrew Victor
avictor.za at gmail.com
Sun May 1 19:04:02 EDT 2011
For supporting multiple AT91 processors in a single kernel image, the
base address of the AIC controller needs to be calculated in the
processor initialization code and then provided to the AIC driver.
* Low-level IRQ hander in entry-macro.S also updated.
* AT91_AIC definitions renamed to AT91xxx_AIC.
All these patches are here:
git://github.com/at91linux/linux-2.6-at91.git/av-devel
Signed-off-by: Andrew Victor <linux at maxim.org.za>
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
index cbf6e5b..461735c 100644
--- a/arch/arm/mach-at91/at572d940hf.c
+++ b/arch/arm/mach-at91/at572d940hf.c
@@ -365,11 +365,13 @@ static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT572D940HF_AIC;
+
if (!priority)
priority = at572d940hf_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 09e0354..ea2d820 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -372,11 +372,13 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91CAP9_AIC;
+
if (!priority)
priority = at91cap9_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 428584f..efb081f 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -336,11 +336,13 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91RM9200_AIC;
+
if (!priority)
priority = at91rm9200_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 24e0c84..741a2b5 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -379,11 +379,13 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91SAM9260_AIC;
+
if (!priority)
priority = at91sam9260_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 7e6973e..192f983 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -337,11 +337,13 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91SAM9261_AIC;
+
if (!priority)
priority = at91sam9261_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ddc172d..a9b3687 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -342,11 +342,13 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91SAM9263_AIC;
+
if (!priority)
priority = at91sam9263_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index c2ef6a4..7342c9b 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -369,11 +369,13 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91SAM9G45_AIC;
+
if (!priority)
priority = at91sam9g45_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d0c1506..cdd3eab 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -332,11 +332,13 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91SAM9RL_AIC;
+
if (!priority)
priority = at91sam9rl_default_irq_priority;
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index ad3ec85..4cf8444 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -75,9 +75,11 @@ static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
+ void __iomem* aic = (void __iomem *)AT91_VA_BASE_SYS + AT91X40_AIC;
+
if (!priority)
priority = at91x40_default_irq_priority;
- at91_aic_init(priority);
+ at91_aic_init(aic, priority);
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index ccbe6cb..f00ad37 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -29,7 +29,7 @@ extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
+extern void __init at91_aic_init(void __iomem* regbase, unsigned int priority[]);
/* Timer */
struct sys_timer;
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h
index fc97be0..c258e4d 100644
--- a/arch/arm/mach-at91/include/mach/at572d940hf.h
+++ b/arch/arm/mach-at91/include/mach/at572d940hf.h
@@ -92,7 +92,7 @@
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT572D940HF_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT572D940HF_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT572D940HF_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT572D940HF_PIOB (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index 0356679..5001021 100644
--- a/arch/arm/mach-at91/include/mach/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -16,7 +16,7 @@
#ifndef AT91_AIC_H
#define AT91_AIC_H
-#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
+#define AT91_AIC_SMR(n) (0x00 + ((n) * 4)) /* Source Mode Registers 0-31 */
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
#define AT91_AIC_SRCTYPE_LOW (0 << 5)
@@ -24,30 +24,30 @@
#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
#define AT91_AIC_SRCTYPE_RISING (3 << 5)
-#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
-#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
+#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */
+#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */
#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
-#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
-#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
-#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
+#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */
+#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */
+#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */
#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
-#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
-#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
+#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */
+#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR 0x138 /* Debug Control Register */
#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
-#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
+#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 80566f6..3f9b00c 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -90,7 +90,7 @@
#define AT91CAP9_CCFG (0xffffeb10 - AT91_BASE_SYS)
#define AT91CAP9_DMA (0xffffec00 - AT91_BASE_SYS)
#define AT91CAP9_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91CAP9_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91CAP9_PIOA (0xfffff200 - AT91_BASE_SYS)
#define AT91CAP9_PIOB (0xfffff400 - AT91_BASE_SYS)
#define AT91CAP9_PIOC (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index f6eec4f..0da806f 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -82,7 +82,7 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
+#define AT91RM9200_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
#define AT91RM9200_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
#define AT91RM9200_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
#define AT91RM9200_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 11a7920..c37b67e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -88,7 +88,7 @@
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91SAM9260_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91SAM9260_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91SAM9260_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91SAM9260_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91SAM9260_PIOB (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 10565f3..aebd964 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -71,7 +71,7 @@
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91SAM9261_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91SAM9261_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91SAM9261_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91SAM9261_PIOB (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 30598de..df10b7e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -86,7 +86,7 @@
#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
#define AT91SAM9263_CCFG (0xffffed10 - AT91_BASE_SYS)
#define AT91SAM9263_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91SAM9263_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91SAM9263_PIOA (0xfffff200 - AT91_BASE_SYS)
#define AT91SAM9263_PIOB (0xfffff400 - AT91_BASE_SYS)
#define AT91SAM9263_PIOC (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 6e3639e..22fb598 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -96,7 +96,7 @@
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91SAM9G45_DMA (0xffffec00 - AT91_BASE_SYS)
#define AT91SAM9G45_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91SAM9G45_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91SAM9G45_PIOA (0xfffff200 - AT91_BASE_SYS)
#define AT91SAM9G45_PIOB (0xfffff400 - AT91_BASE_SYS)
#define AT91SAM9G45_PIOC (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 6d11e5a..7920d96 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -78,7 +78,7 @@
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91SAM9RL_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91SAM9RL_AIC (0xfffff000 - AT91_BASE_SYS)
#define AT91SAM9RL_DBGU (0xfffff200 - AT91_BASE_SYS)
#define AT91SAM9RL_PIOA (0xfffff400 - AT91_BASE_SYS)
#define AT91SAM9RL_PIOB (0xfffff600 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index a93d473..07e4f6e 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -42,7 +42,7 @@
#define AT91X40_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
#define AT91X40_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
#define AT91X40_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
+#define AT91X40_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 7ab68f9..ed46ba5 100644
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -17,16 +17,17 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ ldr \base, =at91_aic_base_addr @ base virtual address of AIC peripheral
+ ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
+ ldr \irqnr, [\base, #(AT91_AIC_IVR)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #(AT91_AIC_ISR)] @ read interrupt source number
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
+ streq \tmp, [\base, #(AT91_AIC_EOICR)] @ not going to be handled further, then ACK it now.
.endm
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index 2d510ee..c3d3330 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -21,7 +21,6 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <linux/io.h>
#include <mach/at91_aic.h>
#define NR_AIC_IRQS 32
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index aff808b..8b04b3c 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -33,23 +33,26 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+/* Base IO address of AIC */
+void __iomem *at91_aic_base_addr __read_mostly;
+
static void at91_aic_mask_irq(struct irq_data *d)
{
/* Disable interrupt on AIC */
- at91_sys_write(AT91_AIC_IDCR, 1 << d->irq);
+ __raw_writel(1 << d->irq, at91_aic_base_addr + AT91_AIC_IDCR);
}
static void at91_aic_unmask_irq(struct irq_data *d)
{
/* Enable interrupt on AIC */
- at91_sys_write(AT91_AIC_IECR, 1 << d->irq);
+ __raw_writel(1 << d->irq, at91_aic_base_addr + AT91_AIC_IECR);
}
static void at91_aic_eoi(struct irq_data *d)
{
/* Acknowledge with AIC after interrupt has been handled */
- at91_sys_write(AT91_AIC_EOICR, 0);
+ __raw_writel(0, at91_aic_base_addr + AT91_AIC_EOICR);
}
unsigned int at91_extern_irq;
@@ -83,8 +86,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
return -EINVAL;
}
- smr = at91_sys_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
- at91_sys_write(AT91_AIC_SMR(d->irq), smr | srctype);
+ smr = __raw_readl(at91_aic_base_addr + AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
+ __raw_writel(smr | srctype, at91_aic_base_addr + AT91_AIC_SMR(d->irq));
return 0;
}
@@ -108,15 +111,15 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
void at91_irq_suspend(void)
{
- backups = at91_sys_read(AT91_AIC_IMR);
- at91_sys_write(AT91_AIC_IDCR, backups);
- at91_sys_write(AT91_AIC_IECR, wakeups);
+ backups = __raw_readl(at91_aic_base_addr + AT91_AIC_IMR);
+ __raw_writel(backups, at91_aic_base_addr + AT91_AIC_IDCR);
+ __raw_writel(wakeups, at91_aic_base_addr + AT91_AIC_IECR);
}
void at91_irq_resume(void)
{
- at91_sys_write(AT91_AIC_IDCR, wakeups);
- at91_sys_write(AT91_AIC_IECR, backups);
+ __raw_writel(wakeups, at91_aic_base_addr + AT91_AIC_IDCR);
+ __raw_writel(backups, at91_aic_base_addr + AT91_AIC_IECR);
}
#else
@@ -133,41 +136,45 @@ static struct irq_chip at91_aic_chip = {
.irq_set_wake = at91_aic_set_wake,
};
+
/*
* Initialize the AIC interrupt controller.
*/
-void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
+void __init at91_aic_init(void __iomem *regbase, unsigned int priority[NR_AIC_IRQS])
{
unsigned int i;
+ /* Store base-address */
+ at91_aic_base_addr = regbase;
+
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
for (i = 0; i < NR_AIC_IRQS; i++) {
/* Put irq number in Source Vector Register: */
- at91_sys_write(AT91_AIC_SVR(i), i);
+ __raw_writel(i, at91_aic_base_addr + AT91_AIC_SVR(i));
/* Active Low interrupt, with the specified priority */
- at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+ __raw_writel(AT91_AIC_SRCTYPE_LOW | priority[i], at91_aic_base_addr + AT91_AIC_SMR(i));
irq_set_chip_and_handler(i, &at91_aic_chip, handle_fasteoi_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
if (i < 8)
- at91_sys_write(AT91_AIC_EOICR, 0);
+ __raw_writel(0, at91_aic_base_addr + AT91_AIC_EOICR);
}
/*
* Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
* When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
*/
- at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+ __raw_writel(NR_AIC_IRQS, at91_aic_base_addr + AT91_AIC_SPU);
/* No debugging in AIC: Debug (Protect) Control Register */
- at91_sys_write(AT91_AIC_DCR, 0);
+ __raw_writel(0, at91_aic_base_addr + AT91_AIC_DCR);
/* Disable and clear all interrupts initially */
- at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
- at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+ __raw_writel(0xFFFFFFFF, at91_aic_base_addr + AT91_AIC_IDCR);
+ __raw_writel(0xFFFFFFFF, at91_aic_base_addr + AT91_AIC_ICCR);
}
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index ea53f4d..852c417 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -209,14 +209,14 @@ static int at91_pm_enter(suspend_state_t state)
at91_gpio_suspend();
at91_irq_suspend();
- pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
- /* remember all the always-wake irqs */
- (at91_sys_read(AT91_PMC_PCSR)
- | (1 << AT91_ID_FIQ)
- | (1 << AT91_ID_SYS)
- | (at91_extern_irq))
- & at91_sys_read(AT91_AIC_IMR),
- state);
+// pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
+// /* remember all the always-wake irqs */
+// (at91_sys_read(AT91_PMC_PCSR)
+// | (1 << AT91_ID_FIQ)
+// | (1 << AT91_ID_SYS)
+// | (at91_extern_irq))
+// & at91_sys_read(AT91_AIC_IMR),
+// state);
switch (state) {
/*
@@ -282,8 +282,8 @@ static int at91_pm_enter(suspend_state_t state)
goto error;
}
- pr_debug("AT91: PM - wakeup %08x\n",
- at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+// pr_debug("AT91: PM - wakeup %08x\n",
+// at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
target_state = PM_SUSPEND_ON;
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 971271c..657820f 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -28,6 +28,7 @@
#include <linux/ioctl.h>
#include <linux/completion.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <asm/uaccess.h>
More information about the linux-arm-kernel
mailing list