[PATCH] arm: omap2plus: move NAND_BLOCK_SIZE out of boards
Igor Grinberg
grinberg at compulab.co.il
Wed May 11 04:37:24 EDT 2011
Please, ignore this,
I have another idea which I will send in the near future.
Sorry for the noise...
On 05/11/11 10:43, Igor Grinberg wrote:
> Each board defining mtd partitions also defined NAND_BLOCK_SIZE as
> SZ_128K. Move the define to common-board-devices.h
>
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> ---
> arch/arm/mach-omap2/board-cm-t35.c | 2 --
> arch/arm/mach-omap2/board-cm-t3517.c | 2 --
> arch/arm/mach-omap2/board-devkit8000.c | 2 --
> arch/arm/mach-omap2/board-omap3beagle.c | 2 --
> arch/arm/mach-omap2/board-omap3pandora.c | 2 --
> arch/arm/mach-omap2/board-omap3touchbook.c | 2 --
> arch/arm/mach-omap2/board-overo.c | 2 --
> arch/arm/mach-omap2/common-board-devices.h | 3 +++
> 8 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
> index e0e2d48..4727a99 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -63,8 +63,6 @@
> #define SB_T35_SMSC911X_CS 4
> #define SB_T35_SMSC911X_GPIO 65
>
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
> #include <linux/smsc911x.h>
> #include <plat/gpmc-smsc911x.h>
> diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
> index a27e3ee..7699eb6 100644
> --- a/arch/arm/mach-omap2/board-cm-t3517.c
> +++ b/arch/arm/mach-omap2/board-cm-t3517.c
> @@ -204,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
> #endif
>
> #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> static struct mtd_partition cm_t3517_nand_partitions[] = {
> {
> .name = "xloader",
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
> index 405542a..ddcdca8 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -61,8 +61,6 @@
> #include "timer-gp.h"
> #include "common-board-devices.h"
>
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> #define OMAP_DM9000_GPIO_IRQ 25
> #define OMAP3_DEVKIT_TS_GPIO 27
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index bc30ab0..039b904 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -54,8 +54,6 @@
> #include "pm.h"
> #include "common-board-devices.h"
>
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> /*
> * OMAP3 Beagle revision
> * Run time detection of Beagle revision is done by reading GPIO.
> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
> index 6c22d3f..439920f 100644
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -57,8 +57,6 @@
> #define PANDORA_WIFI_NRESET_GPIO 23
> #define OMAP3_PANDORA_TS_GPIO 94
>
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> static struct mtd_partition omap3pandora_nand_partitions[] = {
> {
> .name = "xloader",
> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
> index 392278d..c655a81 100644
> --- a/arch/arm/mach-omap2/board-omap3touchbook.c
> +++ b/arch/arm/mach-omap2/board-omap3touchbook.c
> @@ -56,8 +56,6 @@
>
> #include <asm/setup.h>
>
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> #define OMAP3_AC_GPIO 136
> #define OMAP3_TS_GPIO 162
> #define TB_BL_PWM_TIMER 9
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index e152c13..42656a2 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -65,8 +65,6 @@
> #define OVERO_GPIO_USBH_CPEN 168
> #define OVERO_GPIO_USBH_NRESET 183
>
> -#define NAND_BLOCK_SIZE SZ_128K
> -
> #define OVERO_SMSC911X_CS 5
> #define OVERO_SMSC911X_GPIO 176
> #define OVERO_SMSC911X2_CS 4
> diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
> index eb80b3b..5a3c414 100644
> --- a/arch/arm/mach-omap2/common-board-devices.h
> +++ b/arch/arm/mach-omap2/common-board-devices.h
> @@ -30,6 +30,9 @@ struct ads7846_platform_data;
>
> void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
> struct ads7846_platform_data *board_pdata);
> +
> +#define NAND_BLOCK_SIZE SZ_128K
> +
> void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
>
> #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
--
Regards,
Igor.
More information about the linux-arm-kernel
mailing list