[PATCH v3] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup
Avinash.H.M
avinashhm at ti.com
Mon May 2 05:21:51 EDT 2011
The sequence of _ocp_softreset doesn't work for i2c. The i2c module has a
special sequence to reset the module. The sequence is
- Disable the I2C.
- Write to SOFTRESET bit.
- Enable the I2C.
- Poll on the RESETDONE bit.
The sequence is implemented as a function and the i2c_class is updated with
the correct 'reset' pointer. omap_hwmod_softreset function is implemented
which triggers the softreset by writing into sysconfig register. On following
this sequence, i2c module resets properly and timeouts are not seen.
Cc: Rajendra Nayak <rnayak at ti.com>
Cc: Paul Walmsley <paul at pwsan.com>
Cc: Benoit Cousson <b-cousson at ti.com>
Cc: Kevin Hilman <khilman at ti.com>
Signed-off-by: Avinash.H.M <avinashhm at ti.com>
---
The patch is based on
* git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
* master branch.
* 9be20f0 commit. ( Linux-omap rebuilt: Updated to -rc5 )
Changes from previous versions:
from v1:
- moved i2c specific things from hwmod files to i2c files.
- fixed comments from Paul.
- http://www.spinics.net/lists/linux-omap/msg49483.html
from v2:
- Avoided direct SYSCONFIG access in i2c.c
- http://www.spinics.net/lists/linux-omap/msg49632.html
Testing:
* build tested omap2plus_defconfig for warnings and errors. none introduced.
* boot tested on 2430.
* tested for 'core off' in suspend resume on 3430 sdp. core off counters
increment after suspend resume.
arch/arm/mach-omap2/i2c.c | 54 ++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod.c | 12 ++++++
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1 +
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 1 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 1 +
arch/arm/plat-omap/include/plat/i2c.h | 4 ++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 +
7 files changed, 74 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 79c478c..bd50e26 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,9 +21,16 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
+#include <plat/common.h>
#include "mux.h"
+/* In register I2C_CON, Bit 15 is the I2C enable bit */
+#define I2C_EN BIT(15)
+#define I2C_CON_OFFSET 0x24
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -37,3 +44,50 @@ void __init omap2_i2c_mux_pins(int bus_id)
sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
+
+/**
+ * omap_i2c_reset- reset the omap i2c module.
+ * @oh: struct omap_hwmod *
+ *
+ * The i2c moudle in omap2, omap3 had a special sequence to reset. The
+ * sequence is:
+ * - Disable the I2C.
+ * - Write to SOFTRESET bit.
+ * - Enable the I2C.
+ * - Poll on the RESETDONE bit.
+ * The sequence is implemented in below function. This is called for 2420,
+ * 2430 and omap3.
+ */
+int omap_i2c_reset(struct omap_hwmod *oh)
+{
+ u32 v;
+ int c = 0;
+
+ /* Disable I2C */
+ v = omap_hwmod_read(oh, I2C_CON_OFFSET);
+ v = v & ~I2C_EN;
+ omap_hwmod_write(v, oh, I2C_CON_OFFSET);
+
+ /* Write to the SOFTRESET bit */
+ omap_hwmod_softreset(oh);
+
+ /* Enable I2C */
+ v = omap_hwmod_read(oh, I2C_CON_OFFSET);
+ v |= I2C_EN;
+ omap_hwmod_write(v, oh, I2C_CON_OFFSET);
+
+ /* Poll on RESETDONE bit */
+ omap_test_timeout((omap_hwmod_read(oh,
+ oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ else
+ pr_debug("%s: %s: softreset in %d usec\n", __func__,
+ oh->name, c);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e034294..771fc15 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1561,6 +1561,18 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
__raw_writel(v, oh->_mpu_rt_va + reg_offs);
}
+void omap_hwmod_softreset(struct omap_hwmod *oh)
+{
+ u32 v;
+
+ /* Write to the SOFTRESET bit in SYSCONFIG */
+ v = oh->_sysc_cache;
+ v |= (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+ oh->_sysc_cache = v;
+ omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
+}
+
/**
* omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
* @oh: struct omap_hwmod *
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index e9a416c..fd386af 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1447,6 +1447,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
+ .reset = &omap_i2c_reset,
.rev = OMAP_I2C_IP_VERSION_1,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index beedda6..4ad4188 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1524,6 +1524,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
+ .reset = &omap_i2c_reset,
.rev = OMAP_I2C_IP_VERSION_1,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index dec1a38..e938810 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1460,6 +1460,7 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
+ .reset = &omap_i2c_reset,
.rev = OMAP_I2C_IP_VERSION_1,
};
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index fd75dad..20237c1 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -24,6 +24,8 @@
#include <linux/i2c.h>
#include <linux/i2c-omap.h>
+#include <plat/omap_hwmod.h>
+
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
@@ -53,4 +55,6 @@ struct omap_i2c_dev_attr {
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
+int omap_i2c_reset(struct omap_hwmod *oh);
+
#endif /* __ASM__ARCH_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1adea9c..9637130 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -572,6 +572,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
+void omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
--
1.7.1
More information about the linux-arm-kernel
mailing list