[PATCH v6] [ARM] MX1: Add ARMadeus Systems APF9328 board support
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Tue May 10 04:13:42 EDT 2011
On Fri, Apr 29, 2011 at 05:21:39AM +0000, Gwenhael Goavec-Merou wrote:
> APF9328 is an i.MXL based SOM (System On Module) that can be plugged on
> several docking/development boards. Here only basic module support
> is added (Ethernet, Serial, NOR Flash).
>
> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou at armadeus.com>
> Signed-off-by: Eric Jarrige <eric.jarrige at armadeus.org>
> Signed-off-by: Nicolas Colombain <nicolas.colombain at armadeus.com>
> Signed-off-by: Julien Boibessot <julien.boibessot at armadeus.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---
>
> Changes since v5:
> - suppress array index for struct resource
>
> Changes since v4:
> - use constant instead of multiplications
> - change maintainer description
>
> Changes since v3:
> - suppress const and __initconst attributes for platform_data and
> resource,
> - add SOC_IMX1 in Kconfig
>
> Changes since v2:
> - add const and __initconst attributes for platform_data and resource,
> - suppress boot_params.
>
> Changes since v1:
> - merge pins tables for UART
> - suppress init/exit driver callbacks for UART
>
> arch/arm/configs/mx1_defconfig | 1 +
> arch/arm/mach-imx/Kconfig | 7 ++
> arch/arm/mach-imx/Makefile | 1 +
> arch/arm/mach-imx/mach-apf9328.c | 144 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 153 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-imx/mach-apf9328.c
>
> diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
> index ff96e8f..e6f6579 100644
> --- a/arch/arm/configs/mx1_defconfig
> +++ b/arch/arm/configs/mx1_defconfig
> @@ -14,6 +14,7 @@ CONFIG_ARCH_MXC=y
> CONFIG_ARCH_MX1=y
> CONFIG_ARCH_MX1ADS=y
> CONFIG_MACH_SCB9328=y
> +CONFIG_MACH_APF9328=y
> CONFIG_MXC_IRQ_PRIOR=y
> CONFIG_MXC_PWM=y
> CONFIG_NO_HZ=y
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 0382301..4f556ee 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -86,6 +86,13 @@ config MACH_SCB9328
> help
> Say Y here if you are using a Synertronixx scb9328 board
>
> +config MACH_APF9328
> + bool "APF9328"
> + select SOC_IMX1
> + select IMX_HAVE_PLATFORM_IMX_UART
> + help
> + Say Yes here if you are using the Armadeus APF9328 development board
> +
> endif
>
> if MACH_MX21
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 6d51e65..e9eb36d 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
> # i.MX1 based machines
> obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
> obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
> +obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
>
> # i.MX21 based machines
> obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
> diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
> new file mode 100644
> index 0000000..15e45c8
> --- /dev/null
> +++ b/arch/arm/mach-imx/mach-apf9328.c
> @@ -0,0 +1,144 @@
> +/*
> + * linux/arch/arm/mach-imx/mach-apf9328.c
> + *
> + * Copyright (c) 2005-2011 ARMadeus systems <support at armadeus.com>
> + *
> + * This work is based on mach-scb9328.c which is:
> + * Copyright (c) 2004 Sascha Hauer <saschahauer at web.de>
> + * Copyright (c) 2006-2008 Juergen Beisert <jbeisert at netscape.net>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/mtd/physmap.h>
> +#include <linux/dm9000.h>
> +
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +
> +#include <mach/common.h>
> +#include <mach/hardware.h>
> +#include <mach/irqs.h>
> +#include <mach/iomux-mx1.h>
> +
> +#include "devices-imx1.h"
> +
> +static const int apf9328_pins[] __initconst = {
> + /* UART1 */
> + PC9_PF_UART1_CTS,
> + PC10_PF_UART1_RTS,
> + PC11_PF_UART1_TXD,
> + PC12_PF_UART1_RXD,
> + /* UART2 */
> + PB28_PF_UART2_CTS,
> + PB29_PF_UART2_RTS,
> + PB30_PF_UART2_TXD,
> + PB31_PF_UART2_RXD,
> +};
> +
> +/*
> + * The APF9328 can have up to 32MB NOR Flash
> + */
> +static struct resource flash_resource = {
> + .start = MX1_CS0_PHYS,
> + .end = MX1_CS0_PHYS + SZ_32M - 1,
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct physmap_flash_data apf9328_flash_data = {
> + .width = 2,
> +};
> +
> +static struct platform_device apf9328_flash_device = {
> + .name = "physmap-flash",
> + .id = 0,
> + .dev = {
> + .platform_data = &apf9328_flash_data,
> + },
> + .resource = &flash_resource,
> + .num_resources = 1,
> +};
> +
> +/*
> + * APF9328 has a DM9000 Ethernet controller
> + */
> +static struct dm9000_plat_data dm9000_setup = {
> + .flags = DM9000_PLATF_16BITONLY
> +};
> +
> +static struct resource dm9000_resources[] = {
> + {
> + .start = MX1_CS4_PHYS + 0x00C00000,
> + .end = MX1_CS4_PHYS + 0x00C00001,
> + .flags = IORESOURCE_MEM,
> + }, {
> + .start = MX1_CS4_PHYS + 0x00C00002,
> + .end = MX1_CS4_PHYS + 0x00C00003,
> + .flags = IORESOURCE_MEM,
> + }, {
> + .start = IRQ_GPIOB(14),
> + .end = IRQ_GPIOB(14),
> + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> + },
> +};
> +
> +static struct platform_device dm9000x_device = {
> + .name = "dm9000",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(dm9000_resources),
> + .resource = dm9000_resources,
> + .dev = {
> + .platform_data = &dm9000_setup,
> + }
> +};
> +
> +/* --- SERIAL RESSOURCE --- */
> +static const struct imxuart_platform_data uart0_pdata __initconst = {
> + .flags = 0,
> +};
> +
> +static const struct imxuart_platform_data uart1_pdata __initconst = {
> + .flags = IMXUART_HAVE_RTSCTS,
> +};
> +
> +static struct platform_device *devices[] __initdata = {
> + &apf9328_flash_device,
> + &dm9000x_device,
> +};
> +
> +static void __init apf9328_init(void)
> +{
> + mxc_gpio_setup_multiple_pins(apf9328_pins,
> + ARRAY_SIZE(apf9328_pins),
> + "APF9328");
> +
> + imx1_add_imx_uart0(&uart0_pdata);
> + imx1_add_imx_uart1(&uart1_pdata);
> +
> + platform_add_devices(devices, ARRAY_SIZE(devices));
> +}
> +
> +static void __init apf9328_timer_init(void)
> +{
> + mx1_clocks_init(32768);
> +}
> +
> +static struct sys_timer apf9328_timer = {
> + .init = apf9328_timer_init,
> +};
> +
> +MACHINE_START(APF9328, "Armadeus APF9328")
> + /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
> + .map_io = mx1_map_io,
> + .init_early = imx1_init_early,
> + .init_irq = mx1_init_irq,
> + .timer = &apf9328_timer,
> + .init_machine = apf9328_init,
> +MACHINE_END
> --
> 1.7.3.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list