[PATCH] AT91: Add external RTC for Flexibity board

[Maxim Osipov]

Hi,

On Sat, May 7, 2011 at 12:47 PM, Maxim Osipov <maxim.osipov at gmail.com> wrote:
>
> This patch enables external RTC support on AT91 Flexibity board.
>
> Signed-off-by: Maxim Osipov <maxim.osipov at gmail.com>
> ---
>  arch/arm/mach-at91/board-flexibity.c |   12 +++++++++++-
>  1 files changed, 11 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
> index c8a62dc..4fdc96c 100644
> --- a/arch/arm/mach-at91/board-flexibity.c
> +++ b/arch/arm/mach-at91/board-flexibity.c
> @@ -1,7 +1,7 @@
>  /*
>  * linux/arch/arm/mach-at91/board-flexibity.c
>  *
> - *  Copyright (C) 2010 Flexibity
> + *  Copyright (C) 2010-2011 Flexibity
>  *  Copyright (C) 2005 SAN People
>  *  Copyright (C) 2006 Atmel
>  *
> @@ -65,6 +65,13 @@ static struct at91_udc_data __initdata flexibity_udc_data = {
>        .pullup_pin     = 0,            /* pull-up driven by UDC */
>  };
>
> +/* I2C devices */
> +static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
> +       {
> +               I2C_BOARD_INFO("ds1307", 0x68),
> +       },
> +};
> +
>  /* SPI devices */
>  static struct spi_board_info flexibity_spi_devices[] = {
>        {       /* DataFlash chip */
> @@ -143,6 +150,9 @@ static void __init flexibity_board_init(void)
>        at91_add_device_usbh(&flexibity_usbh_data);
>        /* USB Device */
>        at91_add_device_udc(&flexibity_udc_data);
> +       /* I2C */
> +       at91_add_device_i2c(flexibity_i2c_devices,
> +               ARRAY_SIZE(flexibity_i2c_devices));
>        /* SPI */
>        at91_add_device_spi(flexibity_spi_devices,
>                ARRAY_SIZE(flexibity_spi_devices));
> --
> 1.7.4.1
>
>

If no comments on the patch - could someone commit it please? Or
should I submit it to the Russell's patch tracking system?

Kind regards,
Maxim