[PATCH v2 4/7] sdhci: rename sdhci-esdhc-imx.c to sdhci-esdhc.c
Shawn Guo
shawn.guo at linaro.org
Thu May 5 09:22:55 EDT 2011
The patch renames the file to prepare for the consolidation
sdhci-of-esdhc and sdhci-esdhc-imx.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
drivers/mmc/host/Makefile | 2 +-
drivers/mmc/host/sdhci-esdhc-imx.c | 381 ------------------------------------
drivers/mmc/host/sdhci-esdhc.c | 381 ++++++++++++++++++++++++++++++++++++
3 files changed, 382 insertions(+), 382 deletions(-)
delete mode 100644 drivers/mmc/host/sdhci-esdhc-imx.c
create mode 100644 drivers/mmc/host/sdhci-esdhc.c
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 01d38a1..186f0ed 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -45,7 +45,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
-obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
+obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc.o
obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o
obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o
obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
deleted file mode 100644
index 8da57d4..0000000
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * Freescale eSDHC i.MX controller driver for the platform bus.
- *
- * derived from the OF-version.
- *
- * Copyright (c) 2010 Pengutronix e.K.
- * Author: Wolfram Sang <w.sang at pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdhci-pltfm.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/sdio.h>
-#include <mach/hardware.h>
-#include <mach/esdhc.h>
-#include "sdhci.h"
-#include "sdhci-pltfm.h"
-#include "sdhci-esdhc.h"
-
-/* VENDOR SPEC register */
-#define SDHCI_VENDOR_SPEC 0xC0
-#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
-
-#define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0)
-/*
- * The CMDTYPE of the CMD register (offset 0xE) should be set to
- * "11" when the STOP CMD12 is issued on imx53 to abort one
- * open ended multi-blk IO. Otherwise the TC INT wouldn't
- * be generated.
- * In exact block transfer, the controller doesn't complete the
- * operations automatically as required at the end of the
- * transfer and remains on hold if the abort command is not sent.
- * As a result, the TC flag is not asserted and SW received timeout
- * exeception. Bit1 of Vendor Spec registor is used to fix it.
- */
-#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
-
-struct pltfm_imx_data {
- int flags;
- u32 scratchpad;
-};
-
-static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
-{
- void __iomem *base = host->ioaddr + (reg & ~0x3);
- u32 shift = (reg & 0x3) * 8;
-
- writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
-}
-
-static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct pltfm_imx_data *imx_data = pltfm_host->priv;
-
- /* fake CARD_PRESENT flag on mx25/35 */
- u32 val = readl(host->ioaddr + reg);
-
- if (unlikely((reg == SDHCI_PRESENT_STATE)
- && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) {
- struct esdhc_platform_data *boarddata =
- host->mmc->parent->platform_data;
-
- if (boarddata && gpio_is_valid(boarddata->cd_gpio)
- && gpio_get_value(boarddata->cd_gpio))
- /* no card, if a valid gpio says so... */
- val &= SDHCI_CARD_PRESENT;
- else
- /* ... in all other cases assume card is present */
- val |= SDHCI_CARD_PRESENT;
- }
-
- return val;
-}
-
-static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct pltfm_imx_data *imx_data = pltfm_host->priv;
-
- if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
- && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP)))
- /*
- * these interrupts won't work with a custom card_detect gpio
- * (only applied to mx25/35)
- */
- val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
-
- if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
- && (reg == SDHCI_INT_STATUS)
- && (val & SDHCI_INT_DATA_END))) {
- u32 v;
- v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
- v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
- writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
- }
-
- writel(val, host->ioaddr + reg);
-}
-
-static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
-{
- if (unlikely(reg == SDHCI_HOST_VERSION))
- reg ^= 2;
-
- return readw(host->ioaddr + reg);
-}
-
-static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct pltfm_imx_data *imx_data = pltfm_host->priv;
-
- switch (reg) {
- case SDHCI_TRANSFER_MODE:
- /*
- * Postpone this write, we must do it together with a
- * command write that is down below.
- */
- if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
- && (host->cmd->opcode == SD_IO_RW_EXTENDED)
- && (host->cmd->data->blocks > 1)
- && (host->cmd->data->flags & MMC_DATA_READ)) {
- u32 v;
- v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
- v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
- writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
- }
- imx_data->scratchpad = val;
- return;
- case SDHCI_COMMAND:
- if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
- && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
- val |= SDHCI_CMD_ABORTCMD;
- writel(val << 16 | imx_data->scratchpad,
- host->ioaddr + SDHCI_TRANSFER_MODE);
- return;
- case SDHCI_BLOCK_SIZE:
- val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
- break;
- }
- esdhc_clrset_le(host, 0xffff, val, reg);
-}
-
-static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
-{
- u32 new_val;
-
- switch (reg) {
- case SDHCI_POWER_CONTROL:
- /*
- * FSL put some DMA bits here
- * If your board has a regulator, code should be here
- */
- return;
- case SDHCI_HOST_CONTROL:
- /* FSL messed up here, so we can just keep those two */
- new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
- /* ensure the endianess */
- new_val |= ESDHC_HOST_CONTROL_LE;
- /* DMA mode bits are shifted */
- new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
-
- esdhc_clrset_le(host, 0xffff, new_val, reg);
- return;
- }
- esdhc_clrset_le(host, 0xff, val, reg);
-}
-
-static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-
- return clk_get_rate(pltfm_host->clk);
-}
-
-static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-
- return clk_get_rate(pltfm_host->clk) / 256 / 16;
-}
-
-static struct sdhci_ops sdhci_esdhc_ops = {
- .read_l = esdhc_readl_le,
- .read_w = esdhc_readw_le,
- .write_l = esdhc_writel_le,
- .write_w = esdhc_writew_le,
- .write_b = esdhc_writeb_le,
- .set_clock = esdhc_set_clock,
- .get_max_clock = esdhc_pltfm_get_max_clock,
- .get_min_clock = esdhc_pltfm_get_min_clock,
-};
-
-static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
- .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
- | SDHCI_QUIRK_BROKEN_CARD_DETECTION,
- /* ADMA has issues. Might be fixable */
- .ops = &sdhci_esdhc_ops,
-};
-
-static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
-{
- struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
-
- if (boarddata && gpio_is_valid(boarddata->wp_gpio))
- return gpio_get_value(boarddata->wp_gpio);
- else
- return -ENOSYS;
-}
-
-static irqreturn_t cd_irq(int irq, void *data)
-{
- struct sdhci_host *sdhost = (struct sdhci_host *)data;
-
- tasklet_schedule(&sdhost->card_tasklet);
- return IRQ_HANDLED;
-};
-
-static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
-{
- struct sdhci_pltfm_host *pltfm_host;
- struct sdhci_host *host;
- struct esdhc_platform_data *boarddata;
- struct clk *clk;
- int err;
- struct pltfm_imx_data *imx_data;
-
- host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
- if (IS_ERR(host))
- return PTR_ERR(host);
-
- pltfm_host = sdhci_priv(host);
-
- imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
- if (!imx_data)
- return -ENOMEM;
- pltfm_host->priv = imx_data;
-
- clk = clk_get(mmc_dev(host->mmc), NULL);
- if (IS_ERR(clk)) {
- dev_err(mmc_dev(host->mmc), "clk err\n");
- err = PTR_ERR(clk);
- goto err_clk_get;
- }
- clk_enable(clk);
- pltfm_host->clk = clk;
-
- if (!cpu_is_mx25())
- host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
-
- if (cpu_is_mx25() || cpu_is_mx35()) {
- /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
- host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
- /* write_protect can't be routed to controller, use gpio */
- sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
- }
-
- if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
- imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
-
- boarddata = host->mmc->parent->platform_data;
- if (boarddata) {
- err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
- if (err) {
- dev_warn(mmc_dev(host->mmc),
- "no write-protect pin available!\n");
- boarddata->wp_gpio = err;
- }
-
- err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
- if (err) {
- dev_warn(mmc_dev(host->mmc),
- "no card-detect pin available!\n");
- goto no_card_detect_pin;
- }
-
- /* i.MX5x has issues to be researched */
- if (!cpu_is_mx25() && !cpu_is_mx35())
- goto not_supported;
-
- err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- mmc_hostname(host->mmc), host);
- if (err) {
- dev_warn(mmc_dev(host->mmc), "request irq error\n");
- goto no_card_detect_irq;
- }
-
- imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD_WP;
- /* Now we have a working card_detect again */
- host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
- }
-
- err = sdhci_add_host(host);
- if (err)
- goto err_add_host;
-
- return 0;
-
- no_card_detect_irq:
- gpio_free(boarddata->cd_gpio);
- no_card_detect_pin:
- boarddata->cd_gpio = err;
- not_supported:
- kfree(imx_data);
- err_add_host:
- clk_disable(pltfm_host->clk);
- clk_put(pltfm_host->clk);
- err_clk_get:
- sdhci_pltfm_free(pdev);
- return err;
-}
-
-static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
-{
- struct sdhci_host *host = platform_get_drvdata(pdev);
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
- struct pltfm_imx_data *imx_data = pltfm_host->priv;
- int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
-
- sdhci_remove_host(host, dead);
-
- if (boarddata && gpio_is_valid(boarddata->wp_gpio))
- gpio_free(boarddata->wp_gpio);
-
- if (boarddata && gpio_is_valid(boarddata->cd_gpio)) {
- gpio_free(boarddata->cd_gpio);
-
- if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION))
- free_irq(gpio_to_irq(boarddata->cd_gpio), host);
- }
-
- clk_disable(pltfm_host->clk);
- clk_put(pltfm_host->clk);
- kfree(imx_data);
-
- sdhci_pltfm_free(pdev);
-
- return 0;
-}
-
-static struct platform_driver sdhci_esdhc_imx_driver = {
- .driver = {
- .name = "sdhci-esdhc-imx",
- .owner = THIS_MODULE,
- },
- .probe = sdhci_esdhc_imx_probe,
- .remove = __devexit_p(sdhci_esdhc_imx_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
-};
-
-static int __init sdhci_esdhc_imx_init(void)
-{
- return platform_driver_register(&sdhci_esdhc_imx_driver);
-}
-module_init(sdhci_esdhc_imx_init);
-
-static void __exit sdhci_esdhc_imx_exit(void)
-{
- platform_driver_unregister(&sdhci_esdhc_imx_driver);
-}
-module_exit(sdhci_esdhc_imx_exit);
-
-MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
-MODULE_AUTHOR("Wolfram Sang <w.sang at pengutronix.de>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-esdhc.c b/drivers/mmc/host/sdhci-esdhc.c
new file mode 100644
index 0000000..8da57d4
--- /dev/null
+++ b/drivers/mmc/host/sdhci-esdhc.c
@@ -0,0 +1,381 @@
+/*
+ * Freescale eSDHC i.MX controller driver for the platform bus.
+ *
+ * derived from the OF-version.
+ *
+ * Copyright (c) 2010 Pengutronix e.K.
+ * Author: Wolfram Sang <w.sang at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdhci-pltfm.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <mach/hardware.h>
+#include <mach/esdhc.h>
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+/* VENDOR SPEC register */
+#define SDHCI_VENDOR_SPEC 0xC0
+#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
+
+#define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0)
+/*
+ * The CMDTYPE of the CMD register (offset 0xE) should be set to
+ * "11" when the STOP CMD12 is issued on imx53 to abort one
+ * open ended multi-blk IO. Otherwise the TC INT wouldn't
+ * be generated.
+ * In exact block transfer, the controller doesn't complete the
+ * operations automatically as required at the end of the
+ * transfer and remains on hold if the abort command is not sent.
+ * As a result, the TC flag is not asserted and SW received timeout
+ * exeception. Bit1 of Vendor Spec registor is used to fix it.
+ */
+#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
+
+struct pltfm_imx_data {
+ int flags;
+ u32 scratchpad;
+};
+
+static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
+{
+ void __iomem *base = host->ioaddr + (reg & ~0x3);
+ u32 shift = (reg & 0x3) * 8;
+
+ writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
+}
+
+static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+ /* fake CARD_PRESENT flag on mx25/35 */
+ u32 val = readl(host->ioaddr + reg);
+
+ if (unlikely((reg == SDHCI_PRESENT_STATE)
+ && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) {
+ struct esdhc_platform_data *boarddata =
+ host->mmc->parent->platform_data;
+
+ if (boarddata && gpio_is_valid(boarddata->cd_gpio)
+ && gpio_get_value(boarddata->cd_gpio))
+ /* no card, if a valid gpio says so... */
+ val &= SDHCI_CARD_PRESENT;
+ else
+ /* ... in all other cases assume card is present */
+ val |= SDHCI_CARD_PRESENT;
+ }
+
+ return val;
+}
+
+static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+ if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
+ && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP)))
+ /*
+ * these interrupts won't work with a custom card_detect gpio
+ * (only applied to mx25/35)
+ */
+ val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
+ if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+ && (reg == SDHCI_INT_STATUS)
+ && (val & SDHCI_INT_DATA_END))) {
+ u32 v;
+ v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
+ v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
+ writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+ }
+
+ writel(val, host->ioaddr + reg);
+}
+
+static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
+{
+ if (unlikely(reg == SDHCI_HOST_VERSION))
+ reg ^= 2;
+
+ return readw(host->ioaddr + reg);
+}
+
+static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+ switch (reg) {
+ case SDHCI_TRANSFER_MODE:
+ /*
+ * Postpone this write, we must do it together with a
+ * command write that is down below.
+ */
+ if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+ && (host->cmd->opcode == SD_IO_RW_EXTENDED)
+ && (host->cmd->data->blocks > 1)
+ && (host->cmd->data->flags & MMC_DATA_READ)) {
+ u32 v;
+ v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
+ v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
+ writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+ }
+ imx_data->scratchpad = val;
+ return;
+ case SDHCI_COMMAND:
+ if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
+ && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+ val |= SDHCI_CMD_ABORTCMD;
+ writel(val << 16 | imx_data->scratchpad,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ return;
+ case SDHCI_BLOCK_SIZE:
+ val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+ break;
+ }
+ esdhc_clrset_le(host, 0xffff, val, reg);
+}
+
+static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
+{
+ u32 new_val;
+
+ switch (reg) {
+ case SDHCI_POWER_CONTROL:
+ /*
+ * FSL put some DMA bits here
+ * If your board has a regulator, code should be here
+ */
+ return;
+ case SDHCI_HOST_CONTROL:
+ /* FSL messed up here, so we can just keep those two */
+ new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
+ /* ensure the endianess */
+ new_val |= ESDHC_HOST_CONTROL_LE;
+ /* DMA mode bits are shifted */
+ new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+
+ esdhc_clrset_le(host, 0xffff, new_val, reg);
+ return;
+ }
+ esdhc_clrset_le(host, 0xff, val, reg);
+}
+
+static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk);
+}
+
+static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk) / 256 / 16;
+}
+
+static struct sdhci_ops sdhci_esdhc_ops = {
+ .read_l = esdhc_readl_le,
+ .read_w = esdhc_readw_le,
+ .write_l = esdhc_writel_le,
+ .write_w = esdhc_writew_le,
+ .write_b = esdhc_writeb_le,
+ .set_clock = esdhc_set_clock,
+ .get_max_clock = esdhc_pltfm_get_max_clock,
+ .get_min_clock = esdhc_pltfm_get_min_clock,
+};
+
+static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA
+ | SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ /* ADMA has issues. Might be fixable */
+ .ops = &sdhci_esdhc_ops,
+};
+
+static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
+{
+ struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
+
+ if (boarddata && gpio_is_valid(boarddata->wp_gpio))
+ return gpio_get_value(boarddata->wp_gpio);
+ else
+ return -ENOSYS;
+}
+
+static irqreturn_t cd_irq(int irq, void *data)
+{
+ struct sdhci_host *sdhost = (struct sdhci_host *)data;
+
+ tasklet_schedule(&sdhost->card_tasklet);
+ return IRQ_HANDLED;
+};
+
+static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_host *host;
+ struct esdhc_platform_data *boarddata;
+ struct clk *clk;
+ int err;
+ struct pltfm_imx_data *imx_data;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+
+ imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
+ if (!imx_data)
+ return -ENOMEM;
+ pltfm_host->priv = imx_data;
+
+ clk = clk_get(mmc_dev(host->mmc), NULL);
+ if (IS_ERR(clk)) {
+ dev_err(mmc_dev(host->mmc), "clk err\n");
+ err = PTR_ERR(clk);
+ goto err_clk_get;
+ }
+ clk_enable(clk);
+ pltfm_host->clk = clk;
+
+ if (!cpu_is_mx25())
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ if (cpu_is_mx25() || cpu_is_mx35()) {
+ /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
+ host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+ /* write_protect can't be routed to controller, use gpio */
+ sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
+ }
+
+ if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
+ imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
+
+ boarddata = host->mmc->parent->platform_data;
+ if (boarddata) {
+ err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
+ if (err) {
+ dev_warn(mmc_dev(host->mmc),
+ "no write-protect pin available!\n");
+ boarddata->wp_gpio = err;
+ }
+
+ err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
+ if (err) {
+ dev_warn(mmc_dev(host->mmc),
+ "no card-detect pin available!\n");
+ goto no_card_detect_pin;
+ }
+
+ /* i.MX5x has issues to be researched */
+ if (!cpu_is_mx25() && !cpu_is_mx35())
+ goto not_supported;
+
+ err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ mmc_hostname(host->mmc), host);
+ if (err) {
+ dev_warn(mmc_dev(host->mmc), "request irq error\n");
+ goto no_card_detect_irq;
+ }
+
+ imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD_WP;
+ /* Now we have a working card_detect again */
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ }
+
+ err = sdhci_add_host(host);
+ if (err)
+ goto err_add_host;
+
+ return 0;
+
+ no_card_detect_irq:
+ gpio_free(boarddata->cd_gpio);
+ no_card_detect_pin:
+ boarddata->cd_gpio = err;
+ not_supported:
+ kfree(imx_data);
+ err_add_host:
+ clk_disable(pltfm_host->clk);
+ clk_put(pltfm_host->clk);
+ err_clk_get:
+ sdhci_pltfm_free(pdev);
+ return err;
+}
+
+static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data;
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+ int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+ sdhci_remove_host(host, dead);
+
+ if (boarddata && gpio_is_valid(boarddata->wp_gpio))
+ gpio_free(boarddata->wp_gpio);
+
+ if (boarddata && gpio_is_valid(boarddata->cd_gpio)) {
+ gpio_free(boarddata->cd_gpio);
+
+ if (!(host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION))
+ free_irq(gpio_to_irq(boarddata->cd_gpio), host);
+ }
+
+ clk_disable(pltfm_host->clk);
+ clk_put(pltfm_host->clk);
+ kfree(imx_data);
+
+ sdhci_pltfm_free(pdev);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_esdhc_imx_driver = {
+ .driver = {
+ .name = "sdhci-esdhc-imx",
+ .owner = THIS_MODULE,
+ },
+ .probe = sdhci_esdhc_imx_probe,
+ .remove = __devexit_p(sdhci_esdhc_imx_remove),
+#ifdef CONFIG_PM
+ .suspend = sdhci_pltfm_suspend,
+ .resume = sdhci_pltfm_resume,
+#endif
+};
+
+static int __init sdhci_esdhc_imx_init(void)
+{
+ return platform_driver_register(&sdhci_esdhc_imx_driver);
+}
+module_init(sdhci_esdhc_imx_init);
+
+static void __exit sdhci_esdhc_imx_exit(void)
+{
+ platform_driver_unregister(&sdhci_esdhc_imx_driver);
+}
+module_exit(sdhci_esdhc_imx_exit);
+
+MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
+MODULE_AUTHOR("Wolfram Sang <w.sang at pengutronix.de>");
+MODULE_LICENSE("GPL v2");
--
1.7.4.1
More information about the linux-arm-kernel
mailing list