[RFC PATCH] arm: add global early device init
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon May 2 18:19:50 EDT 2011
this will init earlytimer and will try to probe 1 or 2 timers for clockevents
and clocksource
This will also allow to share timer cross arch such as sh-mobile and sh
all arm timers will be update to early device step by step
tested on at91sam9263-ek, at91rm9200-ek and qemu versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Paul Mundt <lethal at linux-sh.org>
Cc: Magnus Damm <magnus.damm at gmail.com>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
---
arch/arm/kernel/time.c | 18 +++++++++++-
arch/arm/mach-shmobile/Makefile | 2 +-
arch/arm/mach-shmobile/board-ag5evm.c | 13 +--------
arch/arm/mach-shmobile/board-ap4evb.c | 18 +++---------
arch/arm/mach-shmobile/board-g3evm.c | 12 +-------
arch/arm/mach-shmobile/board-g4evm.c | 12 +-------
arch/arm/mach-shmobile/board-mackerel.c | 18 +++---------
arch/arm/mach-shmobile/timer.c | 46 -------------------------------
8 files changed, 28 insertions(+), 111 deletions(-)
delete mode 100644 arch/arm/mach-shmobile/timer.c
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 1ff46ca..cb40bbc 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -13,6 +13,7 @@
*/
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
@@ -161,9 +162,22 @@ device_initcall(timer_init_sysfs);
void __init time_init(void)
{
system_timer = machine_desc->timer;
- system_timer->init();
+ if (system_timer->init)
+ system_timer->init();
+
+ /*
+ * Make sure all compiled-in early timers register themselves.
+ *
+ * Run probe() for two "earlytimer" devices, these will be the
+ * clockevents and clocksource devices respectively. In the event
+ * that only a clockevents device is available, we -ENODEV on the
+ * clocksource and the jiffies clocksource is used transparently
+ * instead. No error handling is necessary here.
+ */
+ early_platform_driver_register_all("earlytimer");
+ early_platform_driver_probe("earlytimer", 2, 0);
+
#ifdef CONFIG_HAVE_SCHED_CLOCK
sched_clock_postinit();
#endif
}
-
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 260e09d..6a1cc9e 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
#
# Common objects
-obj-y := map_io.o timer.o console.o clock.o pm_runtime.o
+obj-y := map_io.o console.o clock.o pm_runtime.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index b30b11d..cd9ba29 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -339,6 +339,7 @@ static void __init ag5evm_init_early(void)
/* setup early devices and console here as well */
sh73a0_add_early_devices();
shmobile_setup_console();
+ sh73a0_clock_init();
}
#define PINTC_ADDR 0xe6900000
@@ -447,22 +448,10 @@ static void __init ag5evm_init(void)
platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
}
-static void __init ag5evm_timer_init(void)
-{
- sh73a0_clock_init();
- shmobile_timer.init();
- return;
-}
-
-struct sys_timer ag5evm_timer = {
- .init = ag5evm_timer_init,
-};
-
MACHINE_START(AG5EVM, "ag5evm")
.map_io = shmobile_map_io,
.init_irq = ag5evm_init_irq,
.handle_irq = shmobile_handle_irq_gic,
.init_early = ag5evm_init_early,
.init_machine = ag5evm_init,
- .timer = &ag5evm_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index ed55c01..f800cae 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1096,6 +1096,10 @@ static void __init ap4evb_init_early(void)
/* setup early devices and console here as well */
sh7372_add_early_devices();
shmobile_setup_console();
+ sh7372_clock_init();
+
+ /* External clock source */
+ clk_set_rate(&sh7372_dv_clki_clk, 27000000);
}
#define GPIO_PORT9CR 0xE6051009
@@ -1330,24 +1334,10 @@ static void __init ap4evb_init(void)
fsi_init_pm_clock();
}
-static void __init ap4evb_timer_init(void)
-{
- sh7372_clock_init();
- shmobile_timer.init();
-
- /* External clock source */
- clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer ap4evb_timer = {
- .init = ap4evb_timer_init,
-};
-
MACHINE_START(AP4EVB, "ap4evb")
.map_io = shmobile_map_io,
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_early = ap4evb_init_early,
.init_machine = ap4evb_init,
- .timer = &ap4evb_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 20eeacf..63a6c35 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -249,6 +249,7 @@ static void __init g3evm_init_early(void)
/* setup early devices and console here as well */
sh7367_add_early_devices();
shmobile_setup_console();
+ sh7367_clock_init();
}
static void __init g3evm_init(void)
@@ -338,21 +339,10 @@ static void __init g3evm_init(void)
platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
}
-static void __init g3evm_timer_init(void)
-{
- sh7367_clock_init();
- shmobile_timer.init();
-}
-
-static struct sys_timer g3evm_timer = {
- .init = g3evm_timer_init,
-};
-
MACHINE_START(G3EVM, "g3evm")
.map_io = shmobile_map_io,
.init_irq = sh7367_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_early = g3evm_init_early,
.init_machine = g3evm_init,
- .timer = &g3evm_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 079dd35..46e1b0c 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -263,6 +263,7 @@ static void __init g4evm_init_early(void)
/* setup early devices and console here as well */
sh7377_add_early_devices();
shmobile_setup_console();
+ sh7377_clock_init();
}
#define GPIO_SDHID0_D0 0xe60520fc
@@ -381,21 +382,10 @@ static void __init g4evm_init(void)
platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
}
-static void __init g4evm_timer_init(void)
-{
- sh7377_clock_init();
- shmobile_timer.init();
-}
-
-static struct sys_timer g4evm_timer = {
- .init = g4evm_timer_init,
-};
-
MACHINE_START(G4EVM, "g4evm")
.map_io = shmobile_map_io,
.init_irq = sh7377_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_early = g4evm_init_early,
.init_machine = g4evm_init,
- .timer = &g4evm_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f05a673..d52f323 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1011,6 +1011,10 @@ static void __init mackerel_init_early(void)
/* setup early devices and console here as well */
sh7372_add_early_devices();
shmobile_setup_console();
+ sh7372_clock_init();
+
+ /* External clock source */
+ clk_set_rate(&sh7372_dv_clki_clk, 27000000);
}
#define GPIO_PORT9CR 0xE6051009
@@ -1203,24 +1207,10 @@ static void __init mackerel_init(void)
hdmi_init_pm_clock();
}
-static void __init mackerel_timer_init(void)
-{
- sh7372_clock_init();
- shmobile_timer.init();
-
- /* External clock source */
- clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-}
-
-static struct sys_timer mackerel_timer = {
- .init = mackerel_timer_init,
-};
-
MACHINE_START(MACKEREL, "mackerel")
.map_io = shmobile_map_io,
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_early = mackerel_init_early,
.init_machine = mackerel_init,
- .timer = &mackerel_timer,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
deleted file mode 100644
index 895794b..0000000
--- a/arch/arm/mach-shmobile/timer.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * SH-Mobile Timer
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2002 - 2009 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-#include <linux/platform_device.h>
-#include <asm/mach/time.h>
-
-static void __init shmobile_late_time_init(void)
-{
- /*
- * Make sure all compiled-in early timers register themselves.
- *
- * Run probe() for two "earlytimer" devices, these will be the
- * clockevents and clocksource devices respectively. In the event
- * that only a clockevents device is available, we -ENODEV on the
- * clocksource and the jiffies clocksource is used transparently
- * instead. No error handling is necessary here.
- */
- early_platform_driver_register_all("earlytimer");
- early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-static void __init shmobile_timer_init(void)
-{
- late_time_init = shmobile_late_time_init;
-}
-
-struct sys_timer shmobile_timer = {
- .init = shmobile_timer_init,
-};
--
1.7.4.1
More information about the linux-arm-kernel
mailing list