[PATCH v4] ARM: vfp: Always save VFP state in vfp_pm_suspend

[Barry Song]

From: Colin Cross <ccross at android.com>

vfp_pm_suspend should save the VFP state any time there is
a last_VFP_context.  If it only saves when the VFP is enabled,
the state can get lost when, on a UP system:
   Thread 1 uses the VFP
   Context switch occurs to thread 2, VFP is disabled but the
      VFP context is not saved to allow lazy save and restore
   Thread 2 initiates suspend
   vfp_pm_suspend is called with the VFP disabled, but the
      context has not been saved.

Modify vfp_pm_suspend to save the VFP context whenever
last_VFP_context is set.

Signed-off-by: Colin Cross <ccross at android.com>
Cc: Binghua Duan <binghua.duan at csr.com>
Signed-off-by: Rongjun Ying <rongjun.ying at csr.com>
Signed-off-by: Barry Song <21cnbao at gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas at arm.com>
---
 arch/arm/vfp/vfpmodule.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f746950..e6fe6ae 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -412,6 +412,10 @@ static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
 
 		/* disable, just in case */
 		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+	} else if (last_VFP_context[ti->cpu]) {
+		fmxr(FPEXC, fpexc | FPEXC_EN);
+		vfp_save_state(last_VFP_context[ti->cpu], fpexc);
+		fmxr(FPEXC, fpexc);
 	}
 
 	/* clear any information we had about last context state */
-- 
1.6.0.4