May 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon May 1 23:52:43 PDT 2017
Ending: Wed May 31 23:32:15 PDT 2017
Messages: 234

• Setting MAC address from nv variable broken in barebox 2017.05.0?   Ian Abbott
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Ian Abbott
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Ian Abbott
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Ian Abbott
• [PATCH] globalvar: Fix value of new globalvar when nvvar exists   Ian Abbott
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Ian Abbott
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Ian Abbott
• Undetected mtd partitions since v2017.05   Ian Abbott
• [PATCH] commands: add ':' as alias for 'true'   Ian Abbott
• [PATCH] xfuncs: fix format specifier in pr_emerg call   Ian Abbott
• [PATCH 1/6] commands: allow <cmd>_aliases[] to be const   Ian Abbott
• [PATCH 2/6] hush: make source_aliases[] const   Ian Abbott
• [PATCH 3/6] edit: make edit_aliases[] const   Ian Abbott
• [PATCH 4/6] help: make help_aliases[] const   Ian Abbott
• [PATCH 5/6] test: make test_aliases[] const   Ian Abbott
• [PATCH 6/6] true: make true_aliases[] const   Ian Abbott
• Stable branches resurrected   Ian Abbott
• barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP"   Josh Beavers
• [PATCH] PPC: request a consistent memory layout   Juergen Borleis
• [PATCH v2] PPC: request a consistent memory layout   Juergen Borleis
• [PATCH] PPC: request a consistent memory layout   Juergen Borleis
• [PATCH] PPC: request a consistent memory layout (part II)   Juergen Borleis
• [PATCH] PPC: request a consistent memory layout (part II)   Juergen Borleis
• [PATCH 0/3] i.MX: fec: enable optional clocks in fec driver   Michael Grzeschik
• [PATCH 1/3] i.MX: fec: also enable optional clocks   Michael Grzeschik
• [PATCH 2/3] ARM: phytec-som-imx6: the ethernet clocks get enabled by fec_imx   Michael Grzeschik
• [PATCH 3/3] ARM: mx6sx-sabresdb: the ethernet clocks get enabled by fec_imx   Michael Grzeschik
• [PATCH 3/7] arm: mach-omap: Change mountpoint of boot partitions   Sascha Hauer
• [PATCH 6/7] arm: boards: beaglebone: Update boot scripts   Sascha Hauer
• [PATCH v2 5/8] ARM: socfpga: add arria10 support   Sascha Hauer
• [PATCH v2 5/8] ARM: socfpga: add arria10 support   Sascha Hauer
• [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board   Sascha Hauer
• [PATCH] mci: be more verbose about wrong bus-width   Sascha Hauer
• [PATCH] net: rtl8139: drop unused rtl8139_intr_mask constant   Sascha Hauer
• [PATCH] state: backend_bucket_circular: drop unused free_pattern constant   Sascha Hauer
• [PATCH v2] ARM: i.MX6: add Technexion Pico Hobbit support   Sascha Hauer
• [PATCH] ARM: mx6sx-sabresdb: the ethernet clocks get enabled by fec_imx   Sascha Hauer
• [PATCH] ARM: phytec-som-imx6: the ethernet clocks get enabled by fec_imx   Sascha Hauer
• barebox-state setup   Sascha Hauer
• [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board   Sascha Hauer
• state fixes/clarifications   Sascha Hauer
• [PATCH 1/4] state: Binding: remove @0 from node name   Sascha Hauer
• [PATCH 2/4] state: warn when a state node will be overwritten   Sascha Hauer
• [PATCH 3/4] state: Make an alias mandatory   Sascha Hauer
• [PATCH 4/4] state: Create alias in of_state_fixup()   Sascha Hauer
• [PATCH 1/7] arm: mach-omap: Change file flags in emmc handler   Sascha Hauer
• v2017.05.0   Sascha Hauer
• [PATCH 07/15] input: Add input core   Sascha Hauer
• [PATCH] clock: initialize dummy clocksource statically   Sascha Hauer
• GCC 6.3 Linker error   Sascha Hauer
• [PATCH 0/5] MIPS: start*.S and barebox.lds.S fixups   Sascha Hauer
• [PATCH 0/3] i.MX: fec: enable optional clocks in fec driver   Sascha Hauer
• [PATCH v2 1/2] Documentation: usbgadget: provide autostart notes   Sascha Hauer
• [PATCH 2/4] state: warn when a state node will be overwritten   Sascha Hauer
• barebox-state setup   Sascha Hauer
• [PATCH v2 4/5] arm: boards: beaglebone: Delete default env   Sascha Hauer
• [PATCH] nv: Fix setting of nv.dev.<devname>.<param> variables   Sascha Hauer
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Sascha Hauer
• [PATCH] globalvar: Fix value of new globalvar when nvvar exists   Sascha Hauer
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Sascha Hauer
• [PATCH] PPC: request a consistent memory layout   Sascha Hauer
• [PATCH] ARM: i.MX: HAB: update documentation of command sequence files (CSF)   Sascha Hauer
• barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP"   Sascha Hauer
• [PATCH] state: Fix example in documentation   Sascha Hauer
• [PATCH] fs: Create automount entries for the default mount pathes   Sascha Hauer
• [PATCH] ARM: i.MX50: Amazon Kindle: Add missing compatibility checks   Sascha Hauer
• [PATCH] rtc-lib: drop unused rtc_ydays   Sascha Hauer
• Setting MAC address from nv variable broken in barebox 2017.05.0?   Sascha Hauer
• [PATCH v2] PPC: request a consistent memory layout   Sascha Hauer
• [PATCH v3] Documentation: provide documentation for RNG interfaces.   Sascha Hauer
• [PATCH] of: of_find_node_by_devpath: Fix offset in mtd devices   Sascha Hauer
• [PATCH] state: remove unused variables   Sascha Hauer
• [PATCH] of: Search for /memory node by type, if it is not found by name   Sascha Hauer
• [PATCH] Fix linking with new ld, based on u-boot   Sascha Hauer
• Implement symlinks to directories   Sascha Hauer
• [PATCH 1/4] errno: Include string for ELOOP   Sascha Hauer
• [PATCH 2/4] fs: drop path_check_prereq()   Sascha Hauer
• [PATCH 3/4] fs: Implement links to directories   Sascha Hauer
• [PATCH 4/4] ls: Fix showing links to directories   Sascha Hauer
• [PATCH v2 1/5] arm: mach-omap: Change mountpoint of boot partitions   Sascha Hauer
• [PATCH 3/4] fs: Implement links to directories   Sascha Hauer
• [PATCH 01/42] state: Make pointing to the backend using a phandle the only supported method   Sascha Hauer
• [PATCH 1/2] ARM: i.MX50: Amazon Kindle: Model EY21 compatibility check   Sascha Hauer
• [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull   Sascha Hauer
• [PATCH 1/3] ARM: socfpga: fix QSPI platform data init   Sascha Hauer
• [PATCH v2] Fix linking with new ld, based on u-boot   Sascha Hauer
• [PATCH] ARM: Embedsky E9: Update environment   Sascha Hauer
• [PATCH v3 1/4] arm: mach-omap: Change mountpoint of boot partitions   Sascha Hauer
• [PATCH v3 2/4] arm: boards: phytec-som-am335x: Add automount script   Sascha Hauer
• [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts   Sascha Hauer
• [PATCH v3 4/4] arm: boards: beaglebone: Delete default env   Sascha Hauer
• Antwort: Re: [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull   Sascha Hauer
• [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support   Sascha Hauer
• [PATCH 1/5] images: clean *.imx-sram-img files   Sascha Hauer
• [PATCH 1/2] globalvar: fix build without CONFIG_GLOBALVAR   Sascha Hauer
• [PATCH 2/2] video: select OFTREE from DRIVER_VIDEO_IMX_IPUV3   Sascha Hauer
• [PATCH] xfuncs: fix format specifier in pr_emerg call   Sascha Hauer
• [PATCH] commands: add ':' as alias for 'true'   Sascha Hauer
• [PATCH 1/4] mmc: Consistently use EXT_CSD_* names from eMMC 5.1 spec   Sascha Hauer
• [PATCH 2/4] mmc: add eMMC v5 and V5.1 detection support   Sascha Hauer
• [PATCH 3/4] mmc_extcsd command: Fix multiline prints   Sascha Hauer
• [PATCH 4/4] mmc_extcsd command: rework   Sascha Hauer
• [PATCH 1/6] commands: allow <cmd>_aliases[] to be const   Sascha Hauer
• [PATCH v1] Documentation: provide documentation for NVMEM interfaces.   Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: add support for imx6ull   Sascha Hauer
• [PATCH] PPC: request a consistent memory layout (part II)   Sascha Hauer
• [PATCH] PPC: request a consistent memory layout (part II)   Sascha Hauer
• [PATCH 1/2] state: do not complain about missing backend-storage-type   Sascha Hauer
• [PATCH 2/2] state: Add working example dtsi file   Sascha Hauer
• barebox-state setup   Sascha Hauer
• [PATCH] i2c: mv64xxx: fix indentation   Sascha Hauer
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Sascha Hauer
• [PATCH] usb: imx: Only use clock when it exists   Sascha Hauer
• [PATCH] Makefile: Speed up evaluation of ld options   Sascha Hauer
• [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes   Sascha Hauer
• Stable branches resurrected   Sascha Hauer
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Sascha Hauer
• Barebox State stored in DOS partition   Sascha Hauer
• Stable branches resurrected   Sascha Hauer
• [PATCH 1/2] ARM: imx6: gw54xx: add function to retrieve board revision from GSC   Sascha Hauer
• [PATCH 4/5] fs: add cdev_create_from_file for loop mount option   Sascha Hauer
• [PATCH 1/5] cdev: make file operations const   Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: add support for imx6ull   Christian Hemp
• USB ohci on sama5d3   Georg Hofmann
• [PATCH] ARM: i.MX: HAB: update documentation of command sequence files (CSF)   Marc Kleine-Budde
• [PATCH 2/4] state: warn when a state node will be overwritten   Uwe Kleine-König
• [PATCH 1/2] ARM: i.MX50: Amazon Kindle: Model EY21 compatibility check   Alexander Kurz
• [PATCH 2/2] ARM: i.MX50: Kindle-MX50 DT fixes   Alexander Kurz
• Barebox State stored in DOS partition   Joye Laurent
• [PATCH 1/5] images: clean *.imx-sram-img files   Stefan Lengfeld
• [PATCH 2/5] imx-usb-loader: add prefix '0x' for hex value   Stefan Lengfeld
• [PATCH 3/5] docs: fix hiding of chapter from imx.rst   Stefan Lengfeld
• [PATCH 4/5] docs: add file suffix rst for inclusion in sphinx documentation   Stefan Lengfeld
• [PATCH 5/5] docs: render DIP switches as verbatim text   Stefan Lengfeld
• [PATCH] Documentation: remote-control: fix typo   Aleksander Morgado
• [PATCH 0/2] Enabling support for the FIFO based console in sandbox   Aleksander Morgado
• [PATCH 1/2] sandbox: fix registering multiple consoles   Aleksander Morgado
• [PATCH 2/2] sandbox: --stdin and --stdout allow max one bidirectional console   Aleksander Morgado
• [PATCH] Fix linking with new ld, based on u-boot   Andrey Panov
• [PATCH] of: Search for /memory node by type, if it is not found by name   Andrey Panov
• [PATCH v2] Fix linking with new ld, based on u-boot   Andrey Panov
• [PATCH] ARM: Embedsky E9: Update environment   Andrey Panov
• [PATCH] net: rtl8139: drop unused rtl8139_intr_mask constant   Antony Pavlov
• [PATCH] state: backend_bucket_circular: drop unused free_pattern constant   Antony Pavlov
• [PATCH 07/15] input: Add input core   Antony Pavlov
• [PATCH 0/5] MIPS: start*.S and barebox.lds.S fixups   Antony Pavlov
• [PATCH 1/5] MIPS: start*.S: drop redundant .text   Antony Pavlov
• [PATCH 2/5] MIPS: barebox.lds.S: drop unneeded '_start = .'   Antony Pavlov
• [PATCH 3/5] MIPS: barebox.lds.S: remove unused got   Antony Pavlov
• [PATCH 4/5] MIPS: barebox.lds.S: put .text_entry contents after _stext and _text   Antony Pavlov
• [PATCH 5/5] MIPS: start.S: put entry code into the ".text_entry" section   Antony Pavlov
• [PATCH] rtc-lib: drop unused rtc_ydays   Antony Pavlov
• [PATCH] i2c: mv64xxx: fix indentation   Antony Pavlov
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Trent Piepho
• [PATCH 01/42] state: Make pointing to the backend using a phandle the only supported method   Jan Remmet
• [PATCH 01/42] state: Make pointing to the backend using a phandle the only supported method   Jan Remmet
• [PATCH 01/42] state: Make pointing to the backend using a phandle the only supported method   Jan Remmet
• [PATCH] Documentation: usbgadget: provide autostart notes   Oleksij Rempel
• [PATCH v2 1/2] Documentation: usbgadget: provide autostart notes   Oleksij Rempel
• [PATCH v2 2/2] commands: usbgadget: update fastboot help text   Oleksij Rempel
• [PATCH v1] Documentation: random: provide documentation.   Oleksij Rempel
• [PATCH v2] Documentation: provide documentation for RNG interfaces.   Oleksij Rempel
• [PATCH v3] Documentation: provide documentation for RNG interfaces.   Oleksij Rempel
• [PATCH v1] Documentation: provide documentation for NVMEM interfaces.   Oleksij Rempel
• [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support   Stefan Riedmueller
• [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull   Stefan Riedmueller
• [PATCH 3/3] ARCH: ARM: Add support for phytec-phycore-imx6ull   Stefan Riedmueller
• master breaks phytec-phycore-imx6ul   Stefan Riedmüller
• Antwort: Re: [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull   Stefan Riedmüller
• [PATCH v2 1/5] arm: mach-omap: Change mountpoint of boot partitions   Daniel Schultz
• [PATCH v2 2/5] arm: boards: phytec-som-am335x: Add automount script   Daniel Schultz
• [PATCH v2 3/5] arm: boards: phytec-som-am335x: Update boot scripts   Daniel Schultz
• [PATCH v2 4/5] arm: boards: beaglebone: Delete default env   Daniel Schultz
• [PATCH v2 5/5] arm: boards: afi-gf: Update SD card boot script   Daniel Schultz
• GCC 6.3 Linker error   Daniel Schultz
• [PATCH v2 4/5] arm: boards: beaglebone: Delete default env   Daniel Schultz
• [PATCH v3 1/4] arm: mach-omap: Change mountpoint of boot partitions   Daniel Schultz
• [PATCH v3 2/4] arm: boards: phytec-som-am335x: Add automount script   Daniel Schultz
• [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts   Daniel Schultz
• [PATCH v3 4/4] arm: boards: beaglebone: Delete default env   Daniel Schultz
• [PATCH v2 1/5] arm: mach-omap: Change mountpoint of boot partitions   Daniel Schultz
• [PATCH] mtd: nand_omap_gpmc: fix BCH error correction   Daniel Schultz
• USB ohci on sama5d3   Andrey Smirnov
• [PATCH] clk: i.MX51: Add missing USBOH3_GATE clock   Andrey Smirnov
• [PATCH 1/4] gpio-imx: Do not use gpio_set_value()   Andrey Smirnov
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Andrey Smirnov
• [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes   Andrey Smirnov
• [PATCH 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding   Andrey Smirnov
• [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes   Andrey Smirnov
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Andrey Smirnov
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Andrey Smirnov
• [PATCH 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding   Andrey Smirnov
• [PATCH] usb: imx: Only use clock when it exists   Andrey Smirnov
• [PATCH] clk: i.MX51: Add missing USBOH3_GATE clock   Andrey Smirnov
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Andrey Smirnov
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Andrey Smirnov
• [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes   Andrey Smirnov
• [PATCH v2 0/4] GPIO "active low", hogging and usb-nop-xceive 'reset-gpio' support   Andrey Smirnov
• [PATCH v2 1/4] gpio-imx: Do not use gpio_set_value()   Andrey Smirnov
• [PATCH v2 2/4] gpiolib: Add code to support "active low" GPIOs   Andrey Smirnov
• [PATCH v2 3/4] gpiolib: Add support for GPIO "hog" nodes   Andrey Smirnov
• [PATCH v2 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding   Andrey Smirnov
• master breaks phytec-phycore-imx6ul   Lucas Stach
• [PATCH 1/3] ARM: socfpga: fix QSPI platform data init   Lucas Stach
• [PATCH 2/3] param: fix stub prototype of dev_add_param   Lucas Stach
• [PATCH 3/3] mtd: only build mtdraw_raw_to_mtd_offset when write support is enabled   Lucas Stach
• [PATCH 1/2] globalvar: fix build without CONFIG_GLOBALVAR   Lucas Stach
• [PATCH 2/2] video: select OFTREE from DRIVER_VIDEO_IMX_IPUV3   Lucas Stach
• [PATCH 1/2] ARM: imx6: gw54xx: add function to retrieve board revision from GSC   Lucas Stach
• [PATCH 2/2] ARM: imx6: gw54xx: fixup watchdog nodes on pre rev E boards   Lucas Stach
• [PATCH] ARM: imx6: gw54xx: use wdog1 for barebox   Lucas Stach
• [PATCH] i2c: mv64xxx: fix indentation   Bastian Stender
• [PATCH v2 5/8] ARM: socfpga: add arria10 support   Steffen Trumtrar
• [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board   Steffen Trumtrar
• Undetected mtd partitions since v2017.05   Norbert Wiedmann
• barebox-state setup   Andreas Wilhelm
• barebox-state setup   Andreas Wilhelm
• barebox-state setup   Andreas Wilhelm
• barebox-state setup   Andreas Wilhelm
• [PATCH] Documentation: usbgadget: provide autostart notes   Yegor Yefremov
• [PATCH v1] Documentation: random: provide documentation.   Yegor Yefremov
• [PATCH] clk: i.MX51: Add missing USBOH3_GATE clock   Nikita Yushchenko
• [PATCH 1/4] gpio-imx: Do not use gpio_set_value()   Nikita Yushchenko
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Nikita Yushchenko
• [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes   Nikita Yushchenko
• [PATCH 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding   Nikita Yushchenko
• [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes   Nikita Yushchenko
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Nikita Yushchenko
• [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs   Nikita Yushchenko
• [PATCH 1/5] cdev: make file operations const   Philipp Zabel
• [PATCH 2/5] commands: mount: combine dev and devstr, which are the same   Philipp Zabel
• [PATCH 3/5] fs: add parseopt_b for loop mount option   Philipp Zabel
• [PATCH 4/5] fs: add cdev_create_from_file for loop mount option   Philipp Zabel
• [PATCH 5/5] commands: mount: mention file loop mounts in the help text   Philipp Zabel

Last message date: Wed May 31 23:32:15 PDT 2017
Archived on: Wed May 31 23:32:40 PDT 2017

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...