[PATCH v3 4/4] arm: boards: beaglebone: Delete default env

[Sascha Hauer]

On Fri, May 12, 2017 at 01:07:19PM +0200, Daniel Schultz wrote:
> The Beaglebone environment should be set from outside with an application
> specific environment.
> 
> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
> ---
>  arch/arm/boards/beaglebone/Makefile                                 | 1 -
>  arch/arm/boards/beaglebone/board.c                                  | 2 --
>  arch/arm/boards/beaglebone/defaultenv-beaglebone/boot/sd            | 6 ------
>  .../arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300 | 5 -----
>  4 files changed, 14 deletions(-)
>  delete mode 100644 arch/arm/boards/beaglebone/defaultenv-beaglebone/boot/sd
>  delete mode 100644 arch/arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300
> 
> --- a/arch/arm/boards/beaglebone/defaultenv-beaglebone/init/usb-limit-1300
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -#!/bin/sh
> -
> -echo -n "changing USB current limit to 1300 mA... "
> -i2c_write -b 0 -a 0x24 -r 0x01 0x3e
> -echo "done"

We need this on the beagleboard. We can't just delete it without doing
this somewhere else.

Also I still do not understand the reasoning behind this change. Where
is "outside", to which application should the environment be specific
to?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |