[PATCH 0/3] i.MX: fec: enable optional clocks in fec driver

[Sascha Hauer]

On Fri, May 05, 2017 at 05:49:17PM +0200, Michael Grzeschik wrote:
> All clocks necessary for the fec are described in the device trees. This
> series enables them if found. After that change, all board files
> explicitly enabling them can rely on the fec driver.
> 
> Michael Grzeschik (3):
>   i.MX: fec: also enable optional clocks
>   ARM: phytec-som-imx6: the ethernet clocks get enabled by fec_imx
>   ARM: mx6sx-sabresdb: the ethernet clocks get enabled by fec_imx

Applied, thanks

Sascha

> 
>  arch/arm/boards/freescale-mx6sx-sabresdb/board.c | 27 +---------------------
>  arch/arm/boards/phytec-som-imx6/board.c          | 27 +---------------------
>  drivers/net/fec_imx.c                            | 29 ++++++++++++++++++++++++
>  drivers/net/fec_imx.h                            |  8 +++++++
>  4 files changed, 39 insertions(+), 52 deletions(-)
> 
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |