[PATCH] clk: i.MX51: Add missing USBOH3_GATE clock

[Andrey Smirnov]

On Mon, May 22, 2017 at 10:42 PM, Nikita Yushchenko
<nikita.yoush at cogentembedded.com> wrote:
>>  static void mx5_clocks_mx51_mx53_init(void __iomem *base)
>> @@ -392,6 +394,12 @@ int __init mx51_clocks_init(struct device_d *dev, void __iomem *regs)
>>       clkdev_add_physbase(clks[IMX5_CLK_PER_ROOT], MX51_PWM1_BASE_ADDR, "per");
>>       clkdev_add_physbase(clks[IMX5_CLK_PER_ROOT], MX51_PWM2_BASE_ADDR, "per");
>>
>> +     clkdev_add_physbase(clks[IMX5_CLK_USBOH3_GATE], MX51_OTG_BASE_ADDR + 0x000, NULL);
>> +     clkdev_add_physbase(clks[IMX5_CLK_USBOH3_GATE], MX51_OTG_BASE_ADDR + 0x200, NULL);
>> +     clkdev_add_physbase(clks[IMX5_CLK_USBOH3_GATE], MX51_OTG_BASE_ADDR + 0x400, NULL);
>> +     clkdev_add_physbase(clks[IMX5_CLK_USBOH3_GATE], MX51_OTG_BASE_ADDR + 0x600, NULL);
>> +     clkdev_add_physbase(clks[IMX5_CLK_USBOH3_GATE], MX51_OTG_BASE_ADDR + 0x800, NULL);
>> +
>>       if (IS_ENABLED(CONFIG_DRIVER_VIDEO_IMX_IPUV3))
>>               mx51_clocks_ipu_init(regs);
>
> It may be cleaner to setup USB related clocks under
> if (IS_ENABLED(CONFIG_...) { ... }  - i.e. in the same way as IPU
> related clocks are added in neighbour line.
>
> Also, this is the only place in this file where address arithmetic is
> used.  Not sure if this is ok or not but it catches eye.

Looks like this patch is not really necessary, so I'll just drop it.

Thanks,
Andrey Smirnov