May 2022 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun May 1 09:18:48 PDT 2022
Ending: Tue May 31 23:02:26 PDT 2022
Messages: 254

• [PATCH 0/2] align rk356x drivers as preparation for mainline dts   Michael Riesch
• Aw: [PATCH 0/2] align rk356x drivers as preparation for mainline dts   Frank Wunderlich
• [PATCH 0/2] align rk356x drivers as preparation for mainline dts   Sascha Hauer
• [PATCH 0/3] arm: rockchip: add support for the radxa rock3 board   Michael Riesch
• [PATCH 0/5] Misc fixes   Alexander Shiyan
• [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support   Ahmad Fatoum
• [PATCH 00/15] ARM: rpi: add basic Raspberry Pi 4 support   Ahmad Fatoum
• [PATCH 01/15] PBL: fdt: fix /memory parsing when #address-cells != #size-cells   Ahmad Fatoum
• [PATCH 01/16] ata: ahci: use abstract read/write functions uniformly   Denis Orlov
• [PATCH 01/16] ata: ahci: use abstract read/write functions uniformly   Sascha Hauer
• [PATCH 02/15] of: address: fix printing of OF node name in error message   Ahmad Fatoum
• [PATCH 02/16] ata: ahci: replace magic numbers with named constants   Denis Orlov
• [PATCH 03/15] serial: ns16550: rpi: remove ungating now done by proper clk driver   Ahmad Fatoum
• [PATCH 03/16] ata: ahci: fix missing whitespace in ahci_add_host()   Denis Orlov
• [PATCH 04/15] ARM: cpu: prevent recursive dependencies via CPU_SUPPORTS_64BIT_KERNEL   Ahmad Fatoum
• [PATCH 04/16] ata: ahci: simplify fis structure creation   Denis Orlov
• [PATCH 05/15] ARM: rpi: add Raspberry Pi 3 64-bit build support   Ahmad Fatoum
• [PATCH 05/16] ata: ahci: do not ignore dma handles   Denis Orlov
• [PATCH 06/15] ARM: rpi: rpi3: disallow MMU_EARLY && 64BIT   Ahmad Fatoum
• [PATCH 06/16] ata: ahci: adjust debug messages in ahci_init_port()   Denis Orlov
• [PATCH 07/15] clk: rpi: add Raspberry Pi 4 support   Ahmad Fatoum
• [PATCH 07/16] ata: ahci: correct named constants values and names   Denis Orlov
• [PATCH 08/15] mci: bcm2835: add bcm2711-emmc2 (Rpi4) support   Ahmad Fatoum
• [PATCH 08/16] ata: ahci: properly fill scatter/gather table   Denis Orlov
• [PATCH 09/15] serial: ns16550: rpi: skip baudrate changes for bcm2711   Ahmad Fatoum
• [PATCH 09/16] ata: ahci: use named constants for capabilities bits   Denis Orlov
• [PATCH 1/2] Documentation: boards: stm32mp: document USB bootstrap via DFU   Ahmad Fatoum
• [PATCH 1/2] Documentation: boards: stm32mp: document USB bootstrap via DFU   Sascha Hauer
• [PATCH 1/2] phy: rockchip: align naneng-combphy clocks and resets with binding   Michael Riesch
• [PATCH 1/2] regmap: implement regmap_init_i2c_smbus   Ahmad Fatoum
• [PATCH 1/3] HACK: add device trees for rk3568   Michael Riesch
• [PATCH 1/5] ARM: at91sam9n12ek: Use xz compression   Alexander Shiyan
• [PATCH 1/8] console: add new $global.bootm.earlycon parameter   Ahmad Fatoum
• [PATCH 1/8] rsatoc: fix compiler warnings   Sascha Hauer
• [PATCH 10/15] clocksource: bcm2835: bump below architeced timer for AArch64   Ahmad Fatoum
• [PATCH 10/16] ata: ahci: map buffers properly   Denis Orlov
• [PATCH 11/15] ARM: rpi: add Raspberry Pi 4 support   Ahmad Fatoum
• [PATCH 11/16] ata: ahci: use 64-bit addressing if available   Denis Orlov
• [PATCH 12/15] ARM: rpi: add debug_ll support for Raspberry Pi 4   Ahmad Fatoum
• [PATCH 12/16] ata: ahci: make rx_fis field in ahci_port of type void*   Denis Orlov
• [PATCH 13/15] ARM: rpi: add heuristic for skipping detection of SDIO card   Ahmad Fatoum
• [PATCH 13/16] ata: ahci: add missing capability in ahci_print_info()   Denis Orlov
• [PATCH 14/15] doc: bcm283x: add initial docs for Raspberry Pi 4 support   Ahmad Fatoum
• [PATCH 14/16] ata: ahci: remove redundant cast in ahci_io()   Denis Orlov
• [PATCH 15/15] doc: bcm283x: reference newer firmware   Ahmad Fatoum
• [PATCH 15/16] ata: ahci: register only implemented ports   Denis Orlov
• [PATCH 16/16] ata: ahci: allocate memory in one call in ahci_init_port()   Denis Orlov
• [PATCH 2/2] Documentation: user: usb: fix literal block :: when : is intended   Ahmad Fatoum
• [PATCH 2/2] regulator: add Rockchip rk808 support   Ahmad Fatoum
• [PATCH 2/2] usb: dwc3: align dwc3 clocks with binding   Michael Riesch
• [PATCH 2/3] HACK: add device tree for radxa rock3 model a   Michael Riesch
• [PATCH 2/5] ARM: boards: Fix unconditional compilation of imx51-babbage directory   Alexander Shiyan
• [PATCH 2/8] rsatoc: Add option to print dts output   Sascha Hauer
• [PATCH 2/8] serial: ns16550: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 3/3] arm: rockchip: add support for the radxa rock3 board   Michael Riesch
• [PATCH 3/5] drivers: soc: Fix unconditional compilation of imx directory   Alexander Shiyan
• [PATCH 3/8] crypto: simplify $(srctree)/ handling and remove config_filename macro   Sascha Hauer
• [PATCH 3/8] serial: amba-pl011: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 4/5] globalvar: Add missing empty prototype for globalvar_set()   Alexander Shiyan
• [PATCH 4/8] rsa: Collect keys on list   Sascha Hauer
• [PATCH 4/8] serial: atmel: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 5/5] of: Fix of_prepend_machine_compatible() defined but unused warning   Alexander Shiyan
• [PATCH 5/8] rsa: Add iterator for rsa keys   Sascha Hauer
• [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support   Sascha Hauer
• [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support   Sascha Hauer
• [PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 6/8] rsa: Add pr_fmt and use pr_debug   Sascha Hauer
• [PATCH 6/8] serial: litex: add linux console/earlycon fixup support   Ahmad Fatoum
• [PATCH 7/8] rsa: Turn error messages into debug messages   Sascha Hauer
• [PATCH 7/8] serial: lpuart: add $global.bootm.earlycon fixup support   Ahmad Fatoum
• [PATCH 8/8] fit: try other keys as fallback   Sascha Hauer
• [PATCH 8/8] video: efi_gop: add $global.bootm.earlycon fixup for framebuffer console   Ahmad Fatoum
• [PATCH] .gitignore: Add directories generated by MAKEALL script   Alexander Shiyan
• [PATCH] .gitignore: Add directories generated by MAKEALL script   Sascha Hauer
• [PATCH] ARM: clps711x: Switch to devicetree usage   Alexander Shiyan
• [PATCH] ARM: clps711x: Switch to devicetree usage   Ahmad Fatoum
• [PATCH] ARM: clps711x: Switch to devicetree usage   Alexander Shiyan
• [PATCH] ARM: clps711x: Switch to devicetree usage   Sascha Hauer
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Alexander Shiyan
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Marco Felsch
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Alexander Shiyan
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Marco Felsch
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Ahmad Fatoum
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Marco Felsch
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Alexander Shiyan
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Ahmad Fatoum
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Alexander Shiyan
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Ahmad Fatoum
• [PATCH] ARM: DTS: myir-x335x: Add GPIO aliases   Sascha Hauer
• [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation   Lucas Stach
• [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation   Sascha Hauer
• [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation   Teresa Remmet
• [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation   Lucas Stach
• [PATCH] ARM: imx: esdctl: fix LPDDR4 size calculation   Teresa Remmet
• [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m   Teresa Remmet
• [PATCH] arm: imx: mmdc_size: Increase row_max for imx8m   Sascha Hauer
• [PATCH] ARM: karo-tx6x: Fix DCD check operations   Sascha Hauer
• [PATCH] ARM: myir-x335x: Fix memory size detect   Alexander Shiyan
• [PATCH] ARM: myir-x335x: Fix memory size detect   Sascha Hauer
• [PATCH] ARM: nxp-imx8mq-evk: install Barebox into eMMC boot partitions   Lucas Stach
• [PATCH] ARM: nxp-imx8mq-evk: install Barebox into eMMC boot partitions   Sascha Hauer
• [PATCH] ARM: omap: Cleanup omap4_revision   Alexander Shiyan
• [PATCH] ARM: omap: Cleanup omap4_revision   Sascha Hauer
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address   Alexander Shiyan
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address   Lucas Stach
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address   Alexander Shiyan
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address   Ahmad Fatoum
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address   Sascha Hauer
• [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address   Alexander Shiyan
• [PATCH] ata: ahci: use correct macro when calculating offsets in dma memory   Denis Orlov
• [PATCH] ata: ahci: use correct macro when calculating offsets in dma memory   Sascha Hauer
• [PATCH] clk: fix clk_round_rate() behaviour   Denis Orlov
• [PATCH] clk: fix clk_round_rate() behaviour   Sascha Hauer
• [PATCH] clk: fix clk_round_rate() behaviour   Денис Орлов
• [PATCH] clk: fix clk_round_rate command description   Denis Orlov
• [PATCH] clk: fix clk_round_rate command description   Sascha Hauer
• [PATCH] clk: handle NULL args in clk_set_parent()   Bastian Krause
• [PATCH] clk: handle NULL args in clk_set_parent()   Ahmad Fatoum
• [PATCH] clk: handle NULL args in clk_set_parent()   Sascha Hauer
• [PATCH] clk: handle NULL args in clk_set_parent()   Bastian Krause
• [PATCH] clk: handle NULL args in clk_set_parent()   Sascha Hauer
• [PATCH] Documentation: x86: boot: reserve type_of_loader=13 for barebox   Ahmad Fatoum
• [PATCH] fastboot: inform user if barebox update falls back to raw copy   Ahmad Fatoum
• [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary   Matthias Fend
• [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary   Michael Tretter
• [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary   Matthias Fend
• [PATCH] fixup! net: dns: Generate and verify transaction ID   Jules Maselbas
• [PATCH] fixup! net: dns: Generate and verify transaction ID   Jules Maselbas
• [PATCH] fixup! net: dns: Generate and verify transaction ID   Jules Maselbas
• [PATCH] gpiolib: fix allocating dynamic gpio numbers.   Sascha Hauer
• [PATCH] i2c: add Cadence i2c host controller support   Matthias Fend
• [PATCH] i2c: add Cadence i2c host controller support   Sascha Hauer
• [PATCH] i2c: rockchip: fix transfer return value   Ahmad Fatoum
• [PATCH] i2c: rockchip: fix transfer return value   Sascha Hauer
• [PATCH] mci: core: add device parameter for eMMC boot ack   Ahmad Fatoum
• [PATCH] mci: core: add device parameter for eMMC boot ack   Sascha Hauer
• [PATCH] net: dns: Generate and verify transaction ID   Jules Maselbas
• [PATCH] net: dns: Generate and verify transaction ID   Jules Maselbas
• [PATCH] net: dns: Generate and verify transaction ID   Sascha Hauer
• [PATCH] of: address: treat absent dma-ranges as 1:1 translation   Lucas Stach
• [PATCH] of: address: treat absent dma-ranges as 1:1 translation   Sascha Hauer
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Ahmad Fatoum
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Marco Felsch
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Ahmad Fatoum
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Marco Felsch
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Ahmad Fatoum
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Marco Felsch
• [PATCH] usb: usb251xb: remove duplicate status line on probe success   Sascha Hauer
• [PATCH master 1/2] test: self: add basic testing for malloc()   Ahmad Fatoum
• [PATCH master 1/2] test: self: add basic testing for malloc()   Sascha Hauer
• [PATCH master 2/2] tlsf: fix internal overflow trying to allocate big buffers   Ahmad Fatoum
• [PATCH master] ARM: cpu: don't clobber sp when booted in HYP mode   Ahmad Fatoum
• [PATCH master] ARM: cpu: don't clobber sp when booted in HYP mode   Sascha Hauer
• [PATCH master] ARM: i.MX7: esdctl: fix out-of-bounds read on memory size calculation   Ahmad Fatoum
• [PATCH master] ARM: rpi: fix CM3 breakage after multi-image rework   Ahmad Fatoum
• [PATCH master] ARM: rpi: fix CM3 breakage after multi-image rework   Sascha Hauer
• [PATCH master] ARM: rpi: reinstate support for multiple variants with same DT   Ahmad Fatoum
• [PATCH master] ARM: rpi: reinstate support for multiple variants with same DT   Sascha Hauer
• [PATCH master] Documentation: boards: stm32mp: elaborate on how to build   Ahmad Fatoum
• [PATCH master] Documentation: boards: stm32mp: elaborate on how to build   Sascha Hauer
• [PATCH master v2] ARM: cpu: don't clobber sp when booted in HYP mode   Ahmad Fatoum
• [PATCH RESEND master] PBL: fdt: fix /memory parsing when #address-cells != #size-cells   Ahmad Fatoum
• [PATCH RESEND master] PBL: fdt: fix /memory parsing when #address-cells != #size-cells   Sascha Hauer
• [PATCH v1 1/2] ARM: boards: protonic-stm32mp1: enable deep-probe support   Oleksij Rempel
• [PATCH v1 1/2] ARM: boards: protonic-stm32mp1: enable deep-probe support   Sascha Hauer
• [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices   Oleksij Rempel
• [PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices   Sascha Hauer
• [PATCH v1 1/8] pwm: atmel: Fix build and update   Sam Ravnborg
• [PATCH v1 2/2] ARM: dts: stm32mp151-prtt1c: add DSA switch and MDIO nodes   Oleksij Rempel
• [PATCH v1 2/2] phy: stm32-usphyc: Add dummy driver for child node   Oleksij Rempel
• [PATCH v1 2/8] ARM: at91: Provide at91_mux_pio_pin for use in lowlevel   Sam Ravnborg
• [PATCH v1 3/8] ARM: at91: Add at91sam9 xload_mmc for PBL use   Sam Ravnborg
• [PATCH v1 4/8] ARM: at91: Add extra register definitions   Sam Ravnborg
• [PATCH v1 5/8] ARM: at91: Add lowlevel helpers for at91sam9263   Sam Ravnborg
• [PATCH v1 6/8] ARM: at91: Make sdramc.h useable in multi image builds   Sam Ravnborg
• [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc   Sam Ravnborg
• [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc   Ahmad Fatoum
• [PATCH v1 7/8] ARM: at91: Add initialize function to sdramc   Sam Ravnborg
• [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu   Sam Ravnborg
• [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu   Ahmad Fatoum
• [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu   Sam Ravnborg
• [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu   Ahmad Fatoum
• [PATCH v1 8/8] ARM: at91: Add xload support to skov-arm9cpu   Ahmad Fatoum
• [PATCH v2] ARM: clps711x: Switch to devicetree usage   Alexander Shiyan
• [PATCH v2] ARM: clps711x: Switch to devicetree usage   Sascha Hauer
• [PATCH v2] ARM: i.MX7: esdctl: fix out-of-bounds read on memory size calculation   Ahmad Fatoum
• [PATCH v2] ARM: i.MX7: esdctl: fix out-of-bounds read on memory size calculation   Sascha Hauer
• [PATCH v2] clk: handle NULL args in clk_{g,s}et_parent()   Bastian Krause
• [PATCH v2] clk: handle NULL args in clk_{g,s}et_parent()   Ahmad Fatoum
• [PATCH v2] net: dns: Generate and verify transaction ID   Jules Maselbas
• [PATCH v2] net: dns: Generate and verify transaction ID   Sascha Hauer
• [PATCH v5 0/5] add different OF board fixups   Oleksij Rempel
• [PATCH v5 1/5] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v5 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number()   Oleksij Rempel
• [PATCH v5 3/5] of: add generic of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v5 3/5] of: add generic of_fixup_machine_compatible()   Sascha Hauer
• [PATCH v5 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v5 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible   Oleksij Rempel
• [PATCH v6 0/5] add different OF board fixups   Oleksij Rempel
• [PATCH v6 0/5] add different OF board fixups   Sascha Hauer
• [PATCH v6 1/5] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v6 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number()   Oleksij Rempel
• [PATCH v6 3/5] of: add generic of_prepend_machine_compatible()   Oleksij Rempel
• [PATCH v6 4/5] ARM: boards: skov-imx6: make use of of_prepend_machine_compatible()   Oleksij Rempel
• [PATCH v6 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible   Oleksij Rempel
• [RFC] ARM: OMAP: debug_ll: Add support for PBL console   Alexander Shiyan
• [RFC] ARM: OMAP: debug_ll: Add support for PBL console   Sascha Hauer
• [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu   Sam Ravnborg
• [RFC PATCH v1 0/8] ARM: at91: Add pbl support to skov-arm9cpu   Sam Ravnborg
• [urgent] ARM: rockchip: fix iodomain for r2pro V1.0   Frank Wunderlich
• [urgent] ARM: rockchip: fix iodomain for r2pro V1.0   Sascha Hauer
• [urgent] ARM: rockchip: fix iodomain for r2pro V1.0   Sascha Hauer
• [urgent] ARM: rockchip: fix iodomain for r2pro V1.0   Frank Wunderlich
• Boot from SD if SD-Card is present - Beaglebone Black   Konstantin Kletschke
• Boot from SD if SD-Card is present - Beaglebone Black   Ahmad Fatoum
• Boot from SD if SD-Card is present - Beaglebone Black   Konstantin Kletschke
• Boot from SD if SD-Card is present - Beaglebone Black   Sascha Hauer
• Boot from SD if SD-Card is present - Beaglebone Black   Konstantin Kletschke
• Boot from SD if SD-Card is present - Beaglebone Black   Sascha Hauer
• Boot from SD if SD-Card is present - Beaglebone Black   Konstantin Kletschke
• Boot from SD if SD-Card is present - Beaglebone Black   Konstantin Kletschke
• Boot from SD if SD-Card is present - Beaglebone Black   Ahmad Fatoum
• Boot from SD if SD-Card is present - Beaglebone Black   Konstantin Kletschke
• Driver load order   Frank Wunderlich
• Driver load order   Sascha Hauer
• Driver load order   Ahmad Fatoum
• Driver load order   Ahmad Fatoum
• Aw: Re: Driver load order   Frank Wunderlich
• Aw: Re: Driver load order   Ahmad Fatoum
• Aw: Re: Driver load order   Sascha Hauer
• Aw: Re: Re: Driver load order   Frank Wunderlich
• Aw: Re: Re: Driver load order   Frank Wunderlich
• Aw: Re: Re: Driver load order   Ahmad Fatoum
• Aw: Re: Re: Re: Driver load order   Frank Wunderlich
• Aw: Re: Re: Re: Driver load order   Ahmad Fatoum
• i2c: Rockchip i2c controller support   Matthias Fend
• i2c: Rockchip i2c controller support   Ahmad Fatoum
• One barebox image for multiple boards   Matthias Fend
• One barebox image for multiple boards   Sam Ravnborg
• One barebox image for multiple boards   Sascha Hauer
• One barebox image for multiple boards   Matthias Fend
• One barebox image for multiple boards   Matthias Fend
• One barebox image for multiple boards   Ahmad Fatoum
• One barebox image for multiple boards   Sascha Hauer
• One barebox image for multiple boards   Trent Piepho
• One barebox image for multiple boards   Sascha Hauer
• One barebox image for multiple boards   Matthias Fend
• SEO analysis   Walker Cooney
• Trouver-un-candidat "Me faire référencer sur le site"   Trouver-un-candidat
• v2022.05.0   Sascha Hauer
• v2022.05.0   Alexander Shiyan
• v2022.05.0   Sascha Hauer

Last message date: Tue May 31 23:02:26 PDT 2022
Archived on: Tue May 31 23:02:46 PDT 2022

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...