[PATCH] clk: fix clk_round_rate() behaviour

[Sascha Hauer]

Hi Denis,

On Mon, May 16, 2022 at 10:00:49AM +0300, Denis Orlov wrote:
> Right now this function returns the current rate of the clock in the
> case when the round_rate() is not given in the clock's ops. This breaks
> clk_set_rate(), which calls clk_round_rate() to check if the resulting
> frequency would be the same as the one that is already set.
> Make it so that clk_round_rate() returns the frequency that was given as
> argument in this case.
> 
> Signed-off-by: Denis Orlov <denorl2009 at gmail.com>
> ---
>  drivers/clk/clk.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 52e309e877..7492717d3c 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -139,16 +139,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
>  	if (IS_ERR(clk))
>  		return 0;
>  
> +	if (!clk->ops->round_rate)
> +		return rate;
> +
>  	parent = clk_get_parent(clk);
>  	if (parent)
>  		parent_rate = clk_get_rate(parent);
>  
>  	hw = clk_to_clk_hw(clk);
>  
> -	if (clk->ops->round_rate)
> -		return clk->ops->round_rate(hw, rate, &parent_rate);
> -
> -	return clk_get_rate(clk);
> +	return clk->ops->round_rate(hw, rate, &parent_rate);
>  }

I smell problems with this patch. Which clocks do you have that do not
have a round_rate hook but still allow to set its rate?

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |