[PATCH] ARM: clps711x: Switch to devicetree usage
Alexander Shiyan
eagle.alexander923 at gmail.com
Fri May 20 01:24:28 PDT 2022
This is a complex patch that switches the ARM CLPS711X architecture
to work with the device tree. Includes changes to board initialization
and any architecture drivers used.
Signed-off-by: Alexander Shiyan <eagle.alexander923 at gmail.com>
---
arch/arm/Kconfig | 4 +
arch/arm/boards/clep7212/Makefile | 4 +-
arch/arm/boards/clep7212/board.c | 38 ++++++
arch/arm/boards/clep7212/clep7212.c | 57 --------
arch/arm/boards/clep7212/lowlevel.c | 24 ++--
arch/arm/configs/clps711x_defconfig | 5 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/ep7212-clep7212.dts | 64 +++++++++
arch/arm/mach-clps711x/Kconfig | 9 --
arch/arm/mach-clps711x/Makefile | 2 +-
arch/arm/mach-clps711x/clock.c | 46 +++----
arch/arm/mach-clps711x/common.c | 129 ++++++++++++++++++
.../arm/mach-clps711x/include/mach/clps711x.h | 28 ++--
.../arm/mach-clps711x/include/mach/debug_ll.h | 21 +++
arch/arm/mach-clps711x/include/mach/devices.h | 9 --
arch/arm/mach-clps711x/lowlevel.c | 72 +++++-----
arch/arm/mach-clps711x/reset.c | 29 ----
drivers/clocksource/clps711x.c | 5 +
drivers/gpio/gpio-clps711x.c | 5 +-
drivers/serial/serial_clps711x.c | 55 ++++----
images/Makefile | 1 +
images/Makefile.clps711x | 8 ++
22 files changed, 396 insertions(+), 220 deletions(-)
create mode 100644 arch/arm/boards/clep7212/board.c
delete mode 100644 arch/arm/boards/clep7212/clep7212.c
create mode 100644 arch/arm/dts/ep7212-clep7212.dts
create mode 100644 arch/arm/mach-clps711x/common.c
create mode 100644 arch/arm/mach-clps711x/include/mach/debug_ll.h
delete mode 100644 arch/arm/mach-clps711x/include/mach/devices.h
delete mode 100644 arch/arm/mach-clps711x/reset.c
create mode 100644 images/Makefile.clps711x
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 299e0ab080..8a1d75c19b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -66,9 +66,13 @@ config ARCH_CLPS711X
select CLKDEV_LOOKUP
select CLOCKSOURCE_CLPS711X
select COMMON_CLK
+ select COMMON_CLK_OF_PROVIDER
select CPU_32v4T
select GPIOLIB
+ select HAS_DEBUG_LL
+ select HAVE_PBL_MULTI_IMAGES
select MFD_SYSCON
+ select RELOCATABLE
config ARCH_DAVINCI
bool "TI Davinci"
diff --git a/arch/arm/boards/clep7212/Makefile b/arch/arm/boards/clep7212/Makefile
index 096120e567..85d92c8a7f 100644
--- a/arch/arm/boards/clep7212/Makefile
+++ b/arch/arm/boards/clep7212/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-y += clep7212.o
+obj-y += board.o
lwl-y += lowlevel.o
-bbenv-y += defaultenv-clep7212
+bbenv-$(CONFIG_DEFAULT_ENVIRONMENT) += defaultenv-clep7212
diff --git a/arch/arm/boards/clep7212/board.c b/arch/arm/boards/clep7212/board.c
new file mode 100644
index 0000000000..9603facc10
--- /dev/null
+++ b/arch/arm/boards/clep7212/board.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: Alexander Shiyan <shc_work at mail.ru>
+
+#include <envfs.h>
+#include <init.h>
+#include <of.h>
+#include <stdio.h>
+#include <asm/io.h>
+#include <mach/clps711x.h>
+
+static int clep7212_dt_fixup(struct device_node *root, void *context)
+{
+ char *serial = basprintf("%08x%08x", 0, readl(UNIQID));
+
+ of_set_property(root, "serial-number", serial, strlen(serial) + 1, 1);
+
+ free(serial);
+
+ return 0;
+}
+
+static __init int clep7212_fixup(void)
+{
+ if (of_machine_is_compatible("cirrus,ep7209"))
+ of_register_fixup(clep7212_dt_fixup, NULL);
+
+ return 0;
+}
+postcore_initcall(clep7212_fixup);
+
+static __init int clep7212_defaultenv_init(void)
+{
+ if (of_machine_is_compatible("cirrus,ep7209"))
+ defaultenv_append_directory(defaultenv_clep7212);
+
+ return 0;
+}
+device_initcall(clep7212_defaultenv_init);
diff --git a/arch/arm/boards/clep7212/clep7212.c b/arch/arm/boards/clep7212/clep7212.c
deleted file mode 100644
index 3b497a6bd2..0000000000
--- a/arch/arm/boards/clep7212/clep7212.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2012 Alexander Shiyan <shc_work at mail.ru>
-
-#include <common.h>
-#include <driver.h>
-#include <envfs.h>
-#include <init.h>
-#include <partition.h>
-#include <io.h>
-#include <linux/sizes.h>
-#include <asm/armlinux.h>
-#include <asm/mmu.h>
-#include <generated/mach-types.h>
-
-#include <mach/clps711x.h>
-#include <mach/devices.h>
-
-static int clps711x_devices_init(void)
-{
- u32 serial_h = 0, serial_l = readl(UNIQID);
- void *cfi_io;
-
- /* Setup Chipselects */
- clps711x_setup_memcfg(0, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_16);
- clps711x_setup_memcfg(1, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_8);
- clps711x_setup_memcfg(2, MEMCFG_WAITSTATE_8_3 | MEMCFG_BUS_WIDTH_16 |
- MEMCFG_CLKENB);
- clps711x_setup_memcfg(3, MEMCFG_WAITSTATE_7_1 | MEMCFG_BUS_WIDTH_32);
-
- cfi_io = map_io_sections(CS0_BASE, (void *)0x90000000, SZ_32M);
- add_cfi_flash_device(DEVICE_ID_DYNAMIC, (unsigned long)cfi_io, SZ_32M,
- IORESOURCE_MEM);
-
- devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED,
- "self0");
- devfs_add_partition("nor0", SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED,
- "env0");
-
- armlinux_set_architecture(MACH_TYPE_CLEP7212);
- armlinux_set_serial(((u64)serial_h << 32) | serial_l);
-
- defaultenv_append_directory(defaultenv_clep7212);
-
- return 0;
-}
-device_initcall(clps711x_devices_init);
-
-static int clps711x_console_init(void)
-{
- barebox_set_model("Cirrus Logic CLEP7212");
- barebox_set_hostname("clep7212");
-
- clps711x_add_uart(0);
-
- return 0;
-}
-console_initcall(clps711x_console_init);
diff --git a/arch/arm/boards/clep7212/lowlevel.c b/arch/arm/boards/clep7212/lowlevel.c
index 41827dfa16..845e893d98 100644
--- a/arch/arm/boards/clep7212/lowlevel.c
+++ b/arch/arm/boards/clep7212/lowlevel.c
@@ -1,22 +1,22 @@
// SPDX-License-Identifier: GPL-2.0-or-later
-// SPDX-FileCopyrightText: 2012 Alexander Shiyan <shc_work at mail.ru>
+// SPDX-FileCopyrightText: Alexander Shiyan <shc_work at mail.ru>
+#include <asm/barebox-arm.h>
#include <common.h>
-#include <init.h>
-
-#include <asm/barebox-arm-head.h>
-
#include <mach/clps711x.h>
-#ifdef CONFIG_CLPS711X_RAISE_CPUFREQ
-# define CLPS711X_CPU_PLL_MULT 50
-#else
-# define CLPS711X_CPU_PLL_MULT 40
-#endif
+extern char __dtb_ep7212_clep7212_start[];
-void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
+ENTRY_FUNCTION(start_ep7212_clep7212, r0, r1, r2)
{
+ void *fdt;
+
arm_cpu_lowlevel_init();
- clps711x_barebox_entry(CLPS711X_CPU_PLL_MULT, NULL);
+ /* Stack in SRAM */
+ arm_setup_stack(CS6_BASE - 16);
+
+ fdt = __dtb_ep7212_clep7212_start;
+
+ clps711x_start(fdt + get_runtime_offset());
}
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index d9eab565b9..684ae79e22 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -1,8 +1,8 @@
CONFIG_ARCH_CLPS711X=y
+CONFIG_CLPS711X_RAISE_CPUFREQ=y
CONFIG_AEABI=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
# CONFIG_MEMINFO is not set
-CONFIG_PBL_IMAGE=y
CONFIG_MMU=y
CONFIG_EXPERIMENTAL=y
CONFIG_BAUDRATE=57600
@@ -28,6 +28,8 @@ CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_FLASH=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_BAREBOX_DRIVERS=y
# CONFIG_SPI is not set
CONFIG_MTD=y
CONFIG_DRIVER_CFI=y
@@ -36,6 +38,7 @@ CONFIG_DRIVER_CFI=y
CONFIG_DISK=y
CONFIG_DISK_WRITE=y
CONFIG_DISK_INTF_PLATFORM_IDE=y
+# CONFIG_PINCTRL is not set
CONFIG_FS_CRAMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e0177d84e4..f6edc46052 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -8,6 +8,7 @@ lwl-$(CONFIG_MACH_ADVANTECH_ROM_742X) += imx6dl-advantech-rom-7421.dtb.o
lwl-$(CONFIG_MACH_AFI_GF) += am335x-afi-gf.dtb.o
lwl-$(CONFIG_MACH_BEAGLEBONE) += am335x-bone.dtb.o am335x-boneblack.dtb.o am335x-bone-common.dtb.o
lwl-$(CONFIG_MACH_CANON_A1100) += canon-a1100.dtb.o
+lwl-$(CONFIG_MACH_CLEP7212) += ep7212-clep7212.dtb.o
lwl-$(CONFIG_MACH_CM_FX6) += imx6dl-cm-fx6.dtb.o imx6q-cm-fx6.dtb.o imx6q-utilite.dtb.o
lwl-$(CONFIG_MACH_DFI_FS700_M60) += imx6q-dfi-fs700-m60-6q.dtb.o imx6dl-dfi-fs700-m60-6s.dtb.o
lwl-$(CONFIG_MACH_DUCKBILL) += imx28-duckbill.dtb.o
diff --git a/arch/arm/dts/ep7212-clep7212.dts b/arch/arm/dts/ep7212-clep7212.dts
new file mode 100644
index 0000000000..84c5e79548
--- /dev/null
+++ b/arch/arm/dts/ep7212-clep7212.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Author: Alexander Shiyan <shc_work at mail.ru> */
+
+#include <arm/ep7211.dtsi>
+
+/ {
+ model = "Cirrus Logic EP7212";
+ compatible = "cirrus,clep7212", "cirrus,ep7212", "cirrus,ep7209";
+
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x02000000>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+
+ environment {
+ compatible = "barebox,environment";
+ device-path = &flash, "partname:env";
+ };
+ };
+};
+
+&bus {
+ /* Setup Memory Timings */
+ /* CS0 = WAITSTATE_6_1 | BUS_WIDTH_16 */
+ /* CS1 = WAITSTATE_6_1 | BUS_WIDTH_8 */
+ /* CS2 = WAITSTATE_8_3 | BUS_WIDTH_16 | CLKENB */
+ /* CS3 = WAITSTATE_7_1 | BUS_WIDTH_32 */
+ barebox,ep7209-memcfg1 = <0x25802b28>;
+
+ flash: nor at 0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x02000000>;
+ bank-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "boot";
+ reg = <0x00000 0x80000>;
+ };
+
+ partition at 80000 {
+ label = "env";
+ reg = <0x80000 0x40000>;
+ };
+
+ partition at c0000 {
+ label = "kernel";
+ reg = <0xc0000 0x340000>;
+ };
+
+ partition at 400000 {
+ label = "root";
+ reg = <0x400000 0>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 52cf8468c0..6cf6bc37a2 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -16,7 +16,6 @@ menu "CLPS711X specific settings"
config CLPS711X_RAISE_CPUFREQ
bool "Raise CPU frequency to 90 MHz"
- depends on MACH_CLEP7212
help
Raise CPU frequency to 90 MHz. This operation can be performed
only for devices which allow to operate at 90 MHz.
@@ -24,12 +23,4 @@ config CLPS711X_RAISE_CPUFREQ
endmenu
-config ARCH_TEXT_BASE
- hex
- default 0xc0740000 if MACH_CLEP7212
-
-config BAREBOX_MAX_IMAGE_SIZE
- hex
- default 0x00080000 if MACH_CLEP7212
-
endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4d5950d9b5..871c5f7e9c 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-y += clock.o devices.o reset.o
+obj-y += clock.o common.o
lwl-y += lowlevel.o
diff --git a/arch/arm/mach-clps711x/clock.c b/arch/arm/mach-clps711x/clock.c
index 2c5137c582..7f8b5d783b 100644
--- a/arch/arm/mach-clps711x/clock.c
+++ b/arch/arm/mach-clps711x/clock.c
@@ -1,11 +1,5 @@
-/*
- * Copyright (C) 2012-2016 Alexander Shiyan <shc_work at mail.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: Alexander Shiyan <shc_work at mail.ru>
#include <common.h>
#include <init.h>
@@ -21,13 +15,15 @@
#define CLPS711X_EXT_FREQ 13000000
static struct clk *clks[CLPS711X_CLK_MAX];
+static struct clk_onecell_data clk_data;
-static struct clk_div_table tdiv_tbl[] = {
+static const struct clk_div_table tdiv_tbl[] = {
{ .val = 0, .div = 256, },
{ .val = 1, .div = 1, },
+ { }
};
-static __init int clps711x_clk_init(void)
+static int clps711x_clk_probe(struct device_d *dev)
{
unsigned int f_cpu, f_bus, f_uart, f_timer_ref, pll;
u32 tmp;
@@ -50,7 +46,7 @@ static __init int clps711x_clk_init(void)
f_bus = 36864000 / 2;
}
- f_uart = f_bus / 10;
+ f_uart = DIV_ROUND_CLOSEST(f_bus, 10);
if (tmp & SYSFLG2_CKMODE) {
tmp = readw(SYSCON2);
@@ -72,23 +68,25 @@ static __init int clps711x_clk_init(void)
clks[CLPS711X_CLK_UART] = clk_fixed("uart", f_uart);
clks[CLPS711X_CLK_TIMERREF] = clk_fixed("timer_ref", f_timer_ref);
clks[CLPS711X_CLK_TIMER1] = clk_divider_table("timer1", "timer_ref", 0,
- IOMEM(SYSCON1), 5, 1, tdiv_tbl, ARRAY_SIZE(tdiv_tbl));
+ IOMEM(SYSCON1), 5, 1, tdiv_tbl, 0);
clks[CLPS711X_CLK_TIMER2] = clk_divider_table("timer2", "timer_ref", 0,
- IOMEM(SYSCON1), 7, 1, tdiv_tbl, ARRAY_SIZE(tdiv_tbl));
+ IOMEM(SYSCON1), 7, 1, tdiv_tbl, 0);
- clkdev_add_physbase(clks[CLPS711X_CLK_UART], UARTDR1, NULL);
- clkdev_add_physbase(clks[CLPS711X_CLK_UART], UARTDR2, NULL);
- clkdev_add_physbase(clks[CLPS711X_CLK_TIMER2], TC2D, NULL);
+ clk_data.clks = clks;
+ clk_data.clk_num = CLPS711X_CLK_MAX;
+ of_clk_add_provider(dev->device_node, of_clk_src_onecell_get, &clk_data);
return 0;
}
-postcore_initcall(clps711x_clk_init);
-static __init int clps711x_core_init(void)
-{
- add_generic_device("clps711x-cs", DEVICE_ID_SINGLE, NULL,
- TC2D, SZ_2, IORESOURCE_MEM, NULL);
+static __maybe_unused struct of_device_id clps711x_clk_dt_ids[] = {
+ { .compatible = "cirrus,ep7209-clk", },
+ { }
+};
- return 0;
-}
-coredevice_initcall(clps711x_core_init);
+static struct driver_d clps711x_clk_driver = {
+ .probe = clps711x_clk_probe,
+ .name = "clps711x-clk",
+ .of_compatible = DRV_OF_COMPAT(clps711x_clk_dt_ids),
+};
+postcore_platform_driver(clps711x_clk_driver);
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
new file mode 100644
index 0000000000..d9f702a9b1
--- /dev/null
+++ b/arch/arm/mach-clps711x/common.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: Alexander Shiyan <shc_work at mail.ru>
+
+#include <driver.h>
+#include <restart.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <mach/clps711x.h>
+
+#define CLPS711X_MAP_ADDR 0x90000000
+
+static u32 remap_size = 0;
+
+static void __noreturn clps711x_restart(struct restart_handler *rst)
+{
+ shutdown_barebox();
+
+ asm("mov pc, #0");
+
+ hang();
+}
+
+static __init int clps711x_fixup(void)
+{
+ if (of_machine_is_compatible("cirrus,ep7209"))
+ restart_handler_register_fn("vector", clps711x_restart);
+
+ return 0;
+}
+postcore_initcall(clps711x_fixup);
+
+static int __init clps711x_bus_map(void)
+{
+ if (of_machine_is_compatible("cirrus,ep7209") && remap_size)
+ map_io_sections(0, (void *)CLPS711X_MAP_ADDR, remap_size);
+
+ return 0;
+}
+postmmu_initcall(clps711x_bus_map);
+
+static void clps711x_bus_patch(struct device_node *node,
+ u32 compare, u32 change)
+{
+ const __be32 *ranges;
+ int rsize;
+
+ ranges = of_get_property(node, "ranges", &rsize);
+
+ if (ranges) {
+ int banks = rsize / (sizeof(u32) * 4);
+ __be32 *fixed, *fixedptr;
+
+ fixed = xmalloc(rsize);
+ fixedptr = fixed;
+
+ while (banks--) {
+ u32 bank, cell, addr, size;
+
+ bank = be32_to_cpu(*ranges++);
+ cell = be32_to_cpu(*ranges++);
+ addr = be32_to_cpu(*ranges++);
+ size = be32_to_cpu(*ranges++);
+
+ if (addr == compare) {
+ addr = change;
+ remap_size = size;
+ }
+
+ *fixedptr++ = cpu_to_be32(bank);
+ *fixedptr++ = cpu_to_be32(cell);
+ *fixedptr++ = cpu_to_be32(addr);
+ *fixedptr++ = cpu_to_be32(size);
+ }
+
+ of_set_property(node, "ranges", fixed, rsize, 0);
+
+ free(fixed);
+ }
+}
+
+static int clps711x_bus_fixup(struct device_node *root, void *context)
+{
+ struct device_node *node = context;
+
+ /* Remove patch before boot */
+ if (remap_size)
+ clps711x_bus_patch(node, CLPS711X_MAP_ADDR, 0);
+
+ return 0;
+}
+
+static int clps711x_bus_probe(struct device_d *dev)
+{
+ u32 mcfg;
+
+ /* Setup bus timings */
+ if (!of_property_read_u32(dev->device_node,
+ "barebox,ep7209-memcfg1", &mcfg))
+ writel(mcfg, MEMCFG1);
+ if (!of_property_read_u32(dev->device_node,
+ "barebox,ep7209-memcfg2", &mcfg))
+ writel(mcfg, MEMCFG2);
+
+ /* Patch bus for zero address */
+ clps711x_bus_patch(dev->device_node, 0, CLPS711X_MAP_ADDR);
+
+ of_platform_populate(dev->device_node, NULL, dev);
+
+ of_register_fixup(clps711x_bus_fixup, dev->device_node);
+
+ return 0;
+}
+
+static struct of_device_id __maybe_unused clps711x_bus_dt_ids[] = {
+ { .compatible = "cirrus,ep7209-bus", },
+ { }
+};
+
+static struct driver_d clps711x_bus_driver = {
+ .name = "clps711x-bus",
+ .probe = clps711x_bus_probe,
+ .of_compatible = DRV_OF_COMPAT(clps711x_bus_dt_ids),
+};
+
+static int __init clps711x_bus_init(void)
+{
+ return platform_driver_register(&clps711x_bus_driver);
+}
+core_initcall(clps711x_bus_init);
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 957b2b8477..9aef7f3fd3 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -1,13 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Hardware definitions for Cirrus Logic CLPS711X
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- * Copyright (C) 2012 Alexander Shiyan <shc_work at mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012-2022 Alexander Shiyan <shc_work at mail.ru>
*/
#ifndef __MACH_CLPS711X_H
@@ -159,6 +153,10 @@
#define SYSCON2_CLKENSL (1 << 13)
#define SYSCON2_BUZFREQ (1 << 14)
+#define SYSCON_UARTEN (1 << 8)
+#define SYSFLG_UBUSY (1 << 11)
+#define SYSFLG_UTXFF (1 << 23)
+
#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8)
#define SYNCIO_SMCKEN (1 << 13)
#define SYNCIO_TXFRMEN (1 << 14)
@@ -247,6 +245,16 @@
#define MEMCFG_WAITSTATE_2_0 (14 << 2)
#define MEMCFG_WAITSTATE_1_0 (15 << 2)
-void clps711x_barebox_entry(u32, void *);
+#define UBRLCR_BREAK (1 << 12)
+#define UBRLCR_PRTEN (1 << 13)
+#define UBRLCR_EVENPRT (1 << 14)
+#define UBRLCR_XSTOP (1 << 15)
+#define UBRLCR_FIFOEN (1 << 16)
+#define UBRLCR_WRDLEN5 (0 << 17)
+#define UBRLCR_WRDLEN6 (1 << 17)
+#define UBRLCR_WRDLEN7 (2 << 17)
+#define UBRLCR_WRDLEN8 (3 << 17)
+
+void clps711x_start(void *);
#endif
diff --git a/arch/arm/mach-clps711x/include/mach/debug_ll.h b/arch/arm/mach-clps711x/include/mach/debug_ll.h
new file mode 100644
index 0000000000..342bb7628a
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug_ll.h
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: Alexander Shiyan <shc_work at mail.ru>
+
+#ifndef __MACH_DEBUG_LL_H__
+#define __MACH_DEBUG_LL_H__
+
+#include <asm/io.h>
+#include <mach/clps711x.h>
+
+static inline void PUTC_LL(char c)
+{
+ do {
+ } while (readl(SYSFLG1) & SYSFLG_UTXFF);
+
+ writew(c, UARTDR1);
+
+ do {
+ } while (readl(SYSFLG1) & SYSFLG_UBUSY);
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/devices.h b/arch/arm/mach-clps711x/include/mach/devices.h
deleted file mode 100644
index 77c43be25c..0000000000
--- a/arch/arm/mach-clps711x/include/mach/devices.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef __MACH_DEVICES_H
-#define __MACH_DEVICES_H
-
-void clps711x_setup_memcfg(int bank, u32 val);
-void clps711x_add_uart(unsigned int id);
-
-#endif
diff --git a/arch/arm/mach-clps711x/lowlevel.c b/arch/arm/mach-clps711x/lowlevel.c
index 35b8b35e87..608f0778d7 100644
--- a/arch/arm/mach-clps711x/lowlevel.c
+++ b/arch/arm/mach-clps711x/lowlevel.c
@@ -1,25 +1,31 @@
-/*
- * Copyright (C) 2012 Alexander Shiyan <shc_work at mail.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: Alexander Shiyan <shc_work at mail.ru>
+#include <asm/io.h>
+#include <asm/barebox-arm.h>
#include <common.h>
-#include <init.h>
+#include <debug_ll.h>
#include <linux/sizes.h>
+#include <mach/clps711x.h>
-#include <asm/io.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
+#define DEBUG_LL_BAUDRATE (57600)
-#include <mach/clps711x.h>
+static inline void setup_uart(const u32 bus_speed)
+{
+ u32 baud_base = DIV_ROUND_CLOSEST(bus_speed, 10);
+ u32 baud_divisor =
+ DIV_ROUND_CLOSEST(baud_base, DEBUG_LL_BAUDRATE * 16) - 1;
+
+ writel(baud_divisor | UBRLCR_FIFOEN | UBRLCR_WRDLEN8, UBRLCR1);
+ writel(0, STFCLR);
+ writel(SYSCON_UARTEN, SYSCON1);
-void __naked __bare_init clps711x_barebox_entry(u32 pllmult, void *data)
+ putc_ll('>');
+}
+
+void clps711x_start(void *fdt)
{
- u32 cpu, bus;
+ u32 bus, pll;
/* Check if we running from external 13 MHz clock */
if (!(readl(SYSFLG2) & SYSFLG2_CKMODE)) {
@@ -27,24 +33,17 @@ void __naked __bare_init clps711x_barebox_entry(u32 pllmult, void *data)
writel(SYSCON3_CLKCTL0 | SYSCON3_CLKCTL1, SYSCON3);
asm("nop");
- /* Check valid multiplier, default to 74 MHz */
- if ((pllmult < 20) || (pllmult > 50))
- pllmult = 40;
+ if (IS_ENABLED(CONFIG_CLPS711X_RAISE_CPUFREQ)) {
+ /* Setup PLL to 92160000 Hz */
+ writel(50 << 24, PLLW);
+ asm("nop");
+ }
- /* Setup PLL */
- writel(pllmult << 24, PLLW);
- asm("nop");
-
- /* Check for old CPUs without PLL */
- if ((readl(PLLR) >> 24) != pllmult)
- cpu = 73728000;
- else
- cpu = pllmult * 3686400;
-
- if (cpu >= 36864000)
- bus = cpu / 2;
+ pll = readl(PLLR) >> 24;
+ if (pll)
+ bus = (pll * 3686400) / 4;
else
- bus = 36864000 / 2;
+ bus = 73728000 / 4;
} else {
bus = 13000000;
/* Setup bus wait state scaling factor to 1 */
@@ -52,6 +51,13 @@ void __naked __bare_init clps711x_barebox_entry(u32 pllmult, void *data)
asm("nop");
}
+
+ /* Disable UART, IrDa, LCD */
+ writel(0, SYSCON1);
+
+ if (IS_ENABLED(CONFIG_DEBUG_LL))
+ setup_uart(bus);
+
/* CLKEN select, SDRAM width=32 */
writel(SYSCON2_CLKENSL, SYSCON2);
@@ -62,12 +68,10 @@ void __naked __bare_init clps711x_barebox_entry(u32 pllmult, void *data)
/* Setup Refresh Rate (64ms 8K Blocks) */
writel((64 * bus) / (8192 * 1000), SDRFPR);
- /* Disable UART, IrDa, LCD */
- writel(0, SYSCON1);
/* Disable PWM */
writew(0, PMPCON);
/* Disable LED flasher */
writew(0, LEDFLSH);
- barebox_arm_entry(SDRAM0_BASE, SZ_8M, data);
+ barebox_arm_entry(SDRAM0_BASE, SZ_8M, fdt);
}
diff --git a/arch/arm/mach-clps711x/reset.c b/arch/arm/mach-clps711x/reset.c
deleted file mode 100644
index 90ddb8f5d2..0000000000
--- a/arch/arm/mach-clps711x/reset.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2012 Alexander Shiyan <shc_work at mail.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <init.h>
-#include <restart.h>
-
-static void __noreturn clps711x_restart_soc(struct restart_handler *rst)
-{
- shutdown_barebox();
-
- asm("mov pc, #0");
-
- hang();
-}
-
-static int restart_register_feature(void)
-{
- restart_handler_register_fn("vector", clps711x_restart_soc);
-
- return 0;
-}
-coredevice_initcall(restart_register_feature);
diff --git a/drivers/clocksource/clps711x.c b/drivers/clocksource/clps711x.c
index 1fe7f6c891..8465ee502f 100644
--- a/drivers/clocksource/clps711x.c
+++ b/drivers/clocksource/clps711x.c
@@ -27,6 +27,11 @@ static int clps711x_cs_probe(struct device_d *dev)
struct resource *iores;
u32 rate;
struct clk *timer_clk;
+ int id;
+
+ id = of_alias_get_id(dev->device_node, "timer");
+ if (id != 1)
+ return 0;
timer_clk = clk_get(dev, NULL);
if (IS_ERR(timer_clk))
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index a1965b33e4..45035e7a09 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -10,13 +10,10 @@
static int clps711x_gpio_probe(struct device_d *dev)
{
struct resource *iores;
- int err, id = dev->id;
+ int err, id = of_alias_get_id(dev->device_node, "gpio");
void __iomem *dat, *dir = NULL, *dir_inv = NULL;
struct bgpio_chip *bgc;
- if (dev->device_node)
- id = of_alias_get_id(dev->device_node, "gpio");
-
if (id < 0 || id > 4)
return -ENODEV;
diff --git a/drivers/serial/serial_clps711x.c b/drivers/serial/serial_clps711x.c
index 7aac0970bf..0323cbe28b 100644
--- a/drivers/serial/serial_clps711x.c
+++ b/drivers/serial/serial_clps711x.c
@@ -35,7 +35,7 @@
struct clps711x_uart {
void __iomem *base;
- void __iomem *syscon;
+ struct regmap *regmap;
struct clk *uart_clk;
struct console_device cdev;
};
@@ -61,8 +61,7 @@ static void clps711x_init_port(struct console_device *cdev)
u32 tmp;
/* Disable the UART */
- tmp = readl(s->syscon + SYSCON);
- writel(tmp & ~SYSCON_UARTEN, s->syscon + SYSCON);
+ regmap_update_bits(s->regmap, SYSCON, SYSCON_UARTEN, 0);
/* Setup Line Control Register */
tmp = readl(s->base + UBRLCR) & UBRLCR_BAUD_MASK;
@@ -70,17 +69,19 @@ static void clps711x_init_port(struct console_device *cdev)
writel(tmp, s->base + UBRLCR);
/* Enable the UART */
- tmp = readl(s->syscon + SYSCON);
- writel(tmp | SYSCON_UARTEN, s->syscon + SYSCON);
+ regmap_update_bits(s->regmap, SYSCON, SYSCON_UARTEN, SYSCON_UARTEN);
}
static void clps711x_putc(struct console_device *cdev, char c)
{
struct clps711x_uart *s = cdev->dev->priv;
+ u32 tmp;
/* Wait until there is space in the FIFO */
do {
- } while (readl(s->syscon + SYSFLG) & SYSFLG_UTXFF);
+ regmap_read(s->regmap, SYSFLG, &tmp);
+
+ } while (tmp & SYSFLG_UTXFF);
/* Send the character */
writew(c, s->base + UARTDR);
@@ -90,10 +91,12 @@ static int clps711x_getc(struct console_device *cdev)
{
struct clps711x_uart *s = cdev->dev->priv;
u16 data;
+ u32 tmp;
/* Wait until there is data in the FIFO */
do {
- } while (readl(s->syscon + SYSFLG) & SYSFLG_URXFE);
+ regmap_read(s->regmap, SYSFLG, &tmp);
+ } while (tmp & SYSFLG_URXFE);
data = readw(s->base + UARTDR);
@@ -107,32 +110,32 @@ static int clps711x_getc(struct console_device *cdev)
static int clps711x_tstc(struct console_device *cdev)
{
struct clps711x_uart *s = cdev->dev->priv;
+ u32 tmp;
- return !(readl(s->syscon + SYSFLG) & SYSFLG_URXFE);
+ regmap_read(s->regmap, SYSFLG, &tmp);
+
+ return !(tmp & SYSFLG_URXFE);
}
static void clps711x_flush(struct console_device *cdev)
{
struct clps711x_uart *s = cdev->dev->priv;
+ u32 tmp;
do {
- } while (readl(s->syscon + SYSFLG) & SYSFLG_UBUSY);
+ regmap_read(s->regmap, SYSFLG, &tmp);
+ } while (tmp & SYSFLG_UBUSY);
}
static int clps711x_probe(struct device_d *dev)
{
+ struct device_node *syscon;
struct clps711x_uart *s;
- int err, id = dev->id;
- char syscon_dev[8];
const char *devname;
-
- if (dev->device_node)
- id = of_alias_get_id(dev->device_node, "serial");
-
- if (id != 0 && id != 1)
- return -EINVAL;
+ int err;
s = xzalloc(sizeof(struct clps711x_uart));
+
s->uart_clk = clk_get(dev, NULL);
if (IS_ERR(s->uart_clk)) {
err = PTR_ERR(s->uart_clk);
@@ -140,19 +143,15 @@ static int clps711x_probe(struct device_d *dev)
}
s->base = dev_get_mem_region(dev, 0);
- if (IS_ERR(s->base))
- return PTR_ERR(s->base);
-
- if (!dev->device_node) {
- sprintf(syscon_dev, "syscon%i", id + 1);
- s->syscon = syscon_base_lookup_by_pdevname(syscon_dev);
- } else {
- s->syscon = syscon_base_lookup_by_phandle(dev->device_node,
- "syscon");
+ if (IS_ERR(s->base)) {
+ err = PTR_ERR(s->base);
+ goto out_err;
}
- if (IS_ERR(s->syscon)) {
- err = PTR_ERR(s->syscon);
+ syscon = of_parse_phandle(dev->device_node, "syscon", 0);
+ s->regmap = syscon_node_to_regmap(syscon);
+ if (IS_ERR(s->regmap)) {
+ err = PTR_ERR(s->regmap);
goto out_err;
}
diff --git a/images/Makefile b/images/Makefile
index 5e2b9ecaaa..a148cf4176 100644
--- a/images/Makefile
+++ b/images/Makefile
@@ -152,6 +152,7 @@ include $(srctree)/images/Makefile.ar231x
include $(srctree)/images/Makefile.ath79
include $(srctree)/images/Makefile.bcm283x
include $(srctree)/images/Makefile.bcm47xx
+include $(srctree)/images/Makefile.clps711x
include $(srctree)/images/Makefile.imx
include $(srctree)/images/Makefile.loongson
include $(srctree)/images/Makefile.malta
diff --git a/images/Makefile.clps711x b/images/Makefile.clps711x
new file mode 100644
index 0000000000..d76911d627
--- /dev/null
+++ b/images/Makefile.clps711x
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# barebox image generation Makefile for CLPS711X images
+#
+
+pblb-$(CONFIG_MACH_CLEP7212) += start_ep7212_clep7212
+FILE_barebox-ep7212-clep7212.img = start_ep7212_clep7212.pblb
+image-$(CONFIG_MACH_CLEP7212) += barebox-ep7212-clep7212.img
--
2.32.0
More information about the barebox
mailing list