[PATCH v1 1/2] usb: dwc2: add support st,stm32mp15-fs/hsotg devices
Oleksij Rempel
o.rempel at pengutronix.de
Tue May 10 05:12:41 PDT 2022
Port chip specific configuration for stm32mp15x SoC from kernel v5.18-rc4.
This patch is needed to fix USB host support on OTG port. Tested on stm32mp151.
Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
drivers/usb/dwc2/dwc2.c | 51 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/drivers/usb/dwc2/dwc2.c b/drivers/usb/dwc2/dwc2.c
index 1b5981c2d5..8cb99446e4 100644
--- a/drivers/usb/dwc2/dwc2.c
+++ b/drivers/usb/dwc2/dwc2.c
@@ -13,9 +13,49 @@
#include <driver.h>
#include <linux/clk.h>
#include <linux/reset.h>
+#include <of_device.h>
#include "dwc2.h"
+static void dwc2_set_stm32mp15_fsotg_params(struct dwc2 *dwc2)
+{
+ struct dwc2_core_params *p = &dwc2->params;
+
+ p->otg_cap &= ~(DWC2_CAP_PARAM_HNP_SRP_CAPABLE
+ | DWC2_CAP_PARAM_SRP_ONLY_CAPABLE);
+ p->otg_cap |= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->speed = DWC2_SPEED_PARAM_FULL;
+ p->host_rx_fifo_size = 128;
+ p->host_nperio_tx_fifo_size = 96;
+ p->host_perio_tx_fifo_size = 96;
+ p->max_packet_count = 256;
+ p->phy_type = DWC2_PHY_TYPE_PARAM_FS;
+ p->i2c_enable = false;
+ p->activate_stm_fs_transceiver = true;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+ p->host_support_fs_ls_low_power = true;
+ p->host_ls_low_power_phy_clk = true;
+}
+
+static void dwc2_set_stm32mp15_hsotg_params(struct dwc2 *dwc2)
+{
+ struct dwc2_core_params *p = &dwc2->params;
+
+ p->otg_cap &= ~(DWC2_CAP_PARAM_HNP_SRP_CAPABLE
+ | DWC2_CAP_PARAM_SRP_ONLY_CAPABLE);
+ p->otg_cap |= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ p->host_rx_fifo_size = 440;
+ p->host_nperio_tx_fifo_size = 256;
+ p->host_perio_tx_fifo_size = 256;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
+ p->lpm = false;
+ p->lpm_clock_gating = false;
+ p->besl = false;
+ p->hird_threshold_en = false;
+}
+
static int dwc2_set_mode(void *ctx, enum usb_dr_mode mode)
{
struct dwc2 *dwc2 = ctx;
@@ -43,10 +83,13 @@ static int dwc2_set_mode(void *ctx, enum usb_dr_mode mode)
return ret;
}
+typedef void (*set_params_cb)(struct dwc2 *dwc2);
+
static int dwc2_probe(struct device_d *dev)
{
struct resource *iores;
struct dwc2 *dwc2;
+ set_params_cb set_params;
int ret;
dwc2 = xzalloc(sizeof(*dwc2));
@@ -107,6 +150,10 @@ static int dwc2_probe(struct device_d *dev)
dwc2_set_default_params(dwc2);
+ set_params = of_device_get_match_data(dev);
+ if (set_params)
+ set_params(dwc2);
+
dma_set_mask(dev, DMA_BIT_MASK(32));
dev->priv = dwc2;
@@ -148,6 +195,10 @@ static const struct of_device_id dwc2_platform_dt_ids[] = {
{ .compatible = "brcm,bcm2835-usb", },
{ .compatible = "brcm,bcm2708-usb", },
{ .compatible = "snps,dwc2", },
+ { .compatible = "st,stm32mp15-fsotg",
+ .data = dwc2_set_stm32mp15_fsotg_params },
+ { .compatible = "st,stm32mp15-hsotg",
+ .data = dwc2_set_stm32mp15_hsotg_params },
{ }
};
--
2.30.2
More information about the barebox
mailing list