[urgent] ARM: rockchip: fix iodomain for r2pro V1.0
Frank Wunderlich
frank-w at public-files.de
Mon May 16 02:11:12 PDT 2022
Am 16. Mai 2022 10:41:26 MESZ schrieb Sascha Hauer <s.hauer at pengutronix.de>:
>On Sat, May 14, 2022 at 05:56:09PM +0200, Frank Wunderlich wrote:
>> From: Frank Wunderlich <frank-w at public-files.de>
>>
>> Current code sets vccio4 and vccio6 both to 1v8. R2Pro v1.0 needs 3v3
>> setting on vccio4, else gmac0 (switch for lan-ports) will be damaged.
>
>By damaged you mean physically damaged? How can this happen? Does that
>mean some input signals are not 3v3 tolerant when the domain is
>supplied
>with 1v8?
Yes, if iodomain is set to 1v8 and board works with 3v3 signals it breaks hardware physically (affected me). I know this for device tree,but did not noticed this direct register write.
>Sascha
>
>>
>> IO-domain is per default 3v3 so only vccio6 needs to be set to 1v8
>and
>> clear this bit in the 3v3 register.
>>
>> Fixes: 8ba96c5942d6 ("ARM: rockchip: add BPI-R2-Pro V00 board")
>> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
>> ---
>> arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c | 9 ++++++---
>> arch/arm/mach-rockchip/include/mach/rockchip.h | 3 +++
>> 2 files changed, 9 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
>b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
>> index 4c5b4751b3fb..2a6e0700233a 100644
>> --- a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
>> +++ b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/lowlevel.c
>> @@ -17,10 +17,13 @@ static noinline void rk3568_start(void
>*fdt_blob_fixed_offset)
>> void *fdt;
>>
>> /*
>> - * Enable vccio4 1.8V and vccio6 1.8V
>> - * Needed for GMAC to work.
>> + * set iodomain vccio6 to 1.8V needed for GMAC1 to work.
>> + * vccio4 (gmac0/switch) needs to stay at 3v3 (default)
>> */
>> - writel(RK_SETBITS(0x50), 0xfdc20140);
>> + //set bit 6 in PMU_GRF_IO_VSEL0 for vccio6 1v8
>> + writel(RK_SETBITS(BIT(6)), PMU_GRF_IO_VSEL0);
>> + //clear bit 6 for 3v3 as it was set to 1v8
>> + writel(RK_CLRBITS(BIT(6)), PMU_GRF_IO_VSEL1);
>>
>> fdt = fdt_blob_fixed_offset;
>>
>> diff --git a/arch/arm/mach-rockchip/include/mach/rockchip.h
>b/arch/arm/mach-rockchip/include/mach/rockchip.h
>> index f24db36f0161..ff8b1109f858 100644
>> --- a/arch/arm/mach-rockchip/include/mach/rockchip.h
>> +++ b/arch/arm/mach-rockchip/include/mach/rockchip.h
>> @@ -23,6 +23,9 @@ static inline int rk3288_init(void)
>>
>> #ifdef CONFIG_ARCH_RK3568
>> int rk3568_init(void);
>> +#define PMU_GRF 0xfdc20000
>> +#define PMU_GRF_IO_VSEL0 (PMU_GRF + 0x140)
>> +#define PMU_GRF_IO_VSEL1 (PMU_GRF + 0x144)
>> #else
>> static inline int rk3568_init(void)
>> {
>> --
>> 2.25.1
>>
>>
regards Frank
More information about the barebox
mailing list