[PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address

[Sascha Hauer]

Hi Alexander,

On Thu, May 05, 2022 at 10:36:04AM +0300, Alexander Shiyan wrote:
> Signed-off-by: Alexander Shiyan <eagle.alexander923 at gmail.com>
> ---
>  arch/arm/boards/afi-gf/lowlevel.c            |  2 +-
>  arch/arm/boards/beagle/lowlevel.c            |  2 +-
>  arch/arm/boards/beaglebone/lowlevel.c        |  2 +-
>  arch/arm/boards/myirtech-x335x/lowlevel.c    |  2 +-
>  arch/arm/boards/phytec-som-am335x/lowlevel.c |  2 +-
>  arch/arm/boards/vscom-baltos/lowlevel.c      |  2 +-
>  arch/arm/boards/wago-pfc-am35xx/lowlevel.c   |  2 +-
>  arch/arm/mach-omap/include/mach/debug_ll.h   | 43 ++++++++++++--------
>  8 files changed, 33 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boards/afi-gf/lowlevel.c b/arch/arm/boards/afi-gf/lowlevel.c
> index de40f6c5af..9e86b29b2d 100644
> --- a/arch/arm/boards/afi-gf/lowlevel.c
> +++ b/arch/arm/boards/afi-gf/lowlevel.c
> @@ -230,7 +230,7 @@ static noinline int gf_sram_init(void)
>  
>  	am33xx_uart_soft_reset((void *)AM33XX_UART2_BASE);
>  	am33xx_enable_uart2_pin_mux();
> -	omap_uart_lowlevel_init((void *)AM33XX_UART2_BASE);
> +	omap_uart_lowlevel_init();

I don't think removing the base address from omap_uart_lowlevel_init()
is a step forward. CONFIG_DEBUG_LL is only one possible usecase for this
function, another one is for regular early console with pbl_set_putc().

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |