[PATCH 5/8] serial: imx: add $global.bootm.earlycon fixup support

[Ahmad Fatoum]

Hi,

On 23.05.22 13:04, Sascha Hauer wrote:
> On Mon, May 23, 2022 at 11:25:23AM +0200, Ahmad Fatoum wrote:
>> Allow barebox compute a suitable earlycon parameter.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
>> ---
>>  drivers/serial/serial_imx.c | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c
>> index 6a933c930e9b..cf9c3f02a7ef 100644
>> --- a/drivers/serial/serial_imx.c
>> +++ b/drivers/serial/serial_imx.c
>> @@ -234,6 +234,8 @@ static int imx_serial_probe(struct device_d *dev)
>>  	cdev->flush = imx_serial_flush;
>>  	cdev->setbrg = imx_serial_setbaudrate;
>>  	cdev->linux_console_name = "ttymxc";
>> +	cdev->linux_earlycon_name = "ec_imx6q";
> 
> "ec_imx6q" sounds wrong for the older i.MX SoCs. I don't know how
> OF_EARLYCON_DECLARE works, but this:
> 
> OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup);
> OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup);
> 
> looks like it matches a device tree compatible entry. For the older SoCs
> you should likely use "ec_imx21".

Oh, I can fix this for v2.

> Anyway, plain "earlycon" just works, why the hassle?

Not all boards have a DT with stdout-path or probe from device tree.
I ran into this issue three times now (twice DT-enabled boards, but no
stdout-path, once on x86 with no DT) and figured it would be nifty
if barebox could just optionally generate it.

Cheers,
Ahmad

> 
> Sascha
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |