[PATCH 3/3] arm: rockchip: add support for the radxa rock3 board
Michael Riesch
michael.riesch at wolfvision.net
Tue May 31 09:26:24 PDT 2022
Add basic support for the Radxa ROCK3 Model A board (featuring
the Rockchip RK3568 SoC).
Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
---
Documentation/boards/rockchip.rst | 1 +
arch/arm/boards/Makefile | 1 +
arch/arm/boards/radxa-rock3/.gitignore | 1 +
arch/arm/boards/radxa-rock3/Makefile | 3 ++
arch/arm/boards/radxa-rock3/board.c | 48 +++++++++++++++++++++++
arch/arm/boards/radxa-rock3/lowlevel.c | 44 +++++++++++++++++++++
arch/arm/configs/rockchip_v8_defconfig | 1 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3568-rock-3a.dts | 54 ++++++++++++++++++++++++++
arch/arm/mach-rockchip/Kconfig | 6 +++
images/Makefile.rockchip | 7 ++++
11 files changed, 167 insertions(+)
create mode 100644 arch/arm/boards/radxa-rock3/.gitignore
create mode 100644 arch/arm/boards/radxa-rock3/Makefile
create mode 100644 arch/arm/boards/radxa-rock3/board.c
create mode 100644 arch/arm/boards/radxa-rock3/lowlevel.c
create mode 100644 arch/arm/dts/rk3568-rock-3a.dts
diff --git a/Documentation/boards/rockchip.rst b/Documentation/boards/rockchip.rst
index 041bb9fa64..d4f8a9c5a3 100644
--- a/Documentation/boards/rockchip.rst
+++ b/Documentation/boards/rockchip.rst
@@ -59,6 +59,7 @@ Supported Boards
- Rockchip RK3568 EVB
- Rockchip RK3568 Bananapi R2 Pro
- Pine64 Quartz64 Model A
+- Radxa ROCK3 Model A
The steps described in the following target the RK3568 and the RK3568 EVB but
generally apply to both SoCs and all boards.
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index d303999614..3ccde26f1b 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -192,3 +192,4 @@ obj-$(CONFIG_MACH_SKOV_ARM9CPU) += skov-arm9cpu/
obj-$(CONFIG_MACH_RK3568_EVB) += rockchip-rk3568-evb/
obj-$(CONFIG_MACH_RK3568_BPI_R2PRO) += rockchip-rk3568-bpi-r2pro/
obj-$(CONFIG_MACH_PINE64_QUARTZ64) += pine64-quartz64/
+obj-$(CONFIG_MACH_RADXA_ROCK3) += radxa-rock3/
diff --git a/arch/arm/boards/radxa-rock3/.gitignore b/arch/arm/boards/radxa-rock3/.gitignore
new file mode 100644
index 0000000000..f458f794b5
--- /dev/null
+++ b/arch/arm/boards/radxa-rock3/.gitignore
@@ -0,0 +1 @@
+sdram-init.bin
diff --git a/arch/arm/boards/radxa-rock3/Makefile b/arch/arm/boards/radxa-rock3/Makefile
new file mode 100644
index 0000000000..b37b6c870b
--- /dev/null
+++ b/arch/arm/boards/radxa-rock3/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += board.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/radxa-rock3/board.c b/arch/arm/boards/radxa-rock3/board.c
new file mode 100644
index 0000000000..05a526b06e
--- /dev/null
+++ b/arch/arm/boards/radxa-rock3/board.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <bootsource.h>
+#include <common.h>
+#include <init.h>
+
+struct rock3_model {
+ const char *name;
+ const char *shortname;
+};
+
+static int rock3_probe(struct device_d *dev)
+{
+ enum bootsource bootsource = bootsource_get();
+ int instance = bootsource_get_instance();
+ const struct rock3_model *model;
+
+ model = device_get_match_data(dev);
+
+ barebox_set_model(model->name);
+ barebox_set_hostname(model->shortname);
+
+ if (bootsource == BOOTSOURCE_MMC && instance == 1)
+ of_device_enable_path("/chosen/environment-sd");
+ else
+ of_device_enable_path("/chosen/environment-emmc");
+
+ return 0;
+}
+
+static const struct rock3_model rock3a = {
+ .name = "Radxa ROCK3 Model A",
+ .shortname = "rock3a",
+};
+
+static const struct of_device_id rock3_of_match[] = {
+ {
+ .compatible = "radxa,rock3a",
+ .data = &rock3a,
+ },
+ { /* sentinel */ },
+};
+
+static struct driver_d rock3_board_driver = {
+ .name = "board-rock3",
+ .probe = rock3_probe,
+ .of_compatible = rock3_of_match,
+};
+coredevice_platform_driver(rock3_board_driver);
diff --git a/arch/arm/boards/radxa-rock3/lowlevel.c b/arch/arm/boards/radxa-rock3/lowlevel.c
new file mode 100644
index 0000000000..00a68889cd
--- /dev/null
+++ b/arch/arm/boards/radxa-rock3/lowlevel.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <common.h>
+#include <linux/sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/hardware.h>
+#include <mach/atf.h>
+#include <debug_ll.h>
+#include <mach/rockchip.h>
+
+extern char __dtb_rk3568_rock_3a_start[];
+
+static noinline void rk3568_start(void *fdt)
+{
+ /*
+ * Image execution starts at 0x0, but this is used for ATF and
+ * OP-TEE later, so move away from here.
+ */
+ if (current_el() == 3)
+ relocate_to_adr_full(RK3568_BAREBOX_LOAD_ADDRESS);
+ else
+ relocate_to_current_adr();
+
+ setup_c();
+
+ /*
+ * Enable vccio4 1.8V and vccio6 1.8V
+ * Needed for GMAC to work.
+ */
+ writel(RK_SETBITS(0x50), 0xfdc20140);
+
+ if (current_el() == 3) {
+ rk3568_lowlevel_init();
+ rk3568_atf_load_bl31(fdt);
+ /* not reached */
+ }
+
+ barebox_arm_entry(RK3568_DRAM_BOTTOM, 0x80000000 - RK3568_DRAM_BOTTOM, fdt);
+}
+
+ENTRY_FUNCTION(start_rock3a, r0, r1, r2)
+{
+ rk3568_start(__dtb_rk3568_rock_3a_start);
+}
diff --git a/arch/arm/configs/rockchip_v8_defconfig b/arch/arm/configs/rockchip_v8_defconfig
index 79d51234cc..1c7116e74a 100644
--- a/arch/arm/configs/rockchip_v8_defconfig
+++ b/arch/arm/configs/rockchip_v8_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_MACH_RK3568_EVB=y
CONFIG_MACH_RK3568_BPI_R2PRO=y
CONFIG_MACH_PINE64_QUARTZ64=y
+CONFIG_MACH_RADXA_ROCK3=y
CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_PSCI_CLIENT=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d67d10bde8..723bd2a123 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -105,6 +105,7 @@ lwl-$(CONFIG_MACH_PROTONIC_STM32MP1) += \
stm32mp151-prtt1c.dtb.o \
stm32mp151-prtt1s.dtb.o
lwl-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
+lwl-$(CONFIG_MACH_RADXA_ROCK3) += rk3568-rock-3a.dtb.o
lwl-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
lwl-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
lwl-$(CONFIG_MACH_RK3568_EVB) += rk3568-evb1-v10.dtb.o
diff --git a/arch/arm/dts/rk3568-rock-3a.dts b/arch/arm/dts/rk3568-rock-3a.dts
new file mode 100644
index 0000000000..44d4fc9686
--- /dev/null
+++ b/arch/arm/dts/rk3568-rock-3a.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <arm64/rockchip/rk3568-rock-3a.dts>
+
+/ {
+ chosen: chosen {
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &environment_sd;
+ status = "disabled";
+ };
+
+ environment-emmc {
+ compatible = "barebox,environment";
+ device-path = &environment_emmc;
+ status = "disabled";
+ };
+ };
+
+ memory at a00000 {
+ device_type = "memory";
+ reg = <0x0 0x00a00000 0x0 0x7f600000>;
+ };
+};
+
+&sdhci {
+ no-sd;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ environment_emmc: partition at 408000 {
+ label = "barebox-environment";
+ reg = <0x0 0x408000 0x0 0x8000>;
+ };
+ };
+};
+
+&sdmmc0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ environment_sd: partition at 408000 {
+ label = "barebox-environment";
+ reg = <0x0 0x408000 0x0 0x8000>;
+ };
+ };
+};
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ffd3aa8a4e..4b6dfd2c17 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -80,6 +80,12 @@ config MACH_PINE64_QUARTZ64
help
Say Y here if you are using a Pine64 Quartz64
+config MACH_RADXA_ROCK3
+ select ARCH_RK3568
+ bool "Radxa ROCK3"
+ help
+ Say Y here if you are using a Radxa ROCK3
+
comment "select board features:"
config ARCH_RK3399_OPTEE
diff --git a/images/Makefile.rockchip b/images/Makefile.rockchip
index cdc7772c2e..33c76caf79 100644
--- a/images/Makefile.rockchip
+++ b/images/Makefile.rockchip
@@ -20,6 +20,9 @@ image-$(CONFIG_MACH_RK3568_BPI_R2PRO) += barebox-rk3568-bpi-r2pro.img
pblb-$(CONFIG_MACH_PINE64_QUARTZ64) += start_quartz64a
image-$(CONFIG_MACH_PINE64_QUARTZ64) += barebox-quartz64a.img
+pblb-$(CONFIG_MACH_RADXA_ROCK3) += start_rock3a
+image-$(CONFIG_MACH_RADXA_ROCK3) += barebox-rock3a.img
+
quiet_cmd_rkimg_image = RK-IMG $@
cmd_rkimg_image = $(objtree)/scripts/rkimage -o $@ $(word 2,$^) $(word 1,$^)
@@ -34,3 +37,7 @@ $(obj)/barebox-rk3568-bpi-r2pro.img: $(obj)/start_rk3568_bpi_r2pro.pblb \
$(obj)/barebox-quartz64a.img: $(obj)/start_quartz64a.pblb \
$(board)/pine64-quartz64/sdram-init.bin
$(call if_changed,rkimg_image)
+
+$(obj)/barebox-rock3a.img: $(obj)/start_rock3a.pblb \
+ $(board)/radxa-rock3/sdram-init.bin
+ $(call if_changed,rkimg_image)
--
2.30.2
More information about the barebox
mailing list