April 2022 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 06:01:35 PDT 2022
Ending: Fri Apr 29 01:07:26 PDT 2022
Messages: 213

• [PATCH] ARM: fix GCC 11.x build failures for ARMv7   Ian Abbott
• Getting more of Barebox   Ahmad Fatoum
• [PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY   Ahmad Fatoum
• [PATCH v1 1/2] net: designware: eqos: fix receive issue with external switch   Ahmad Fatoum
• [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT   Ahmad Fatoum
• [PATCH] video: ipuv3: combine two subsequent info prints into one   Ahmad Fatoum
• [PATCH v1] net: designware: eqos: fix link speed configuration for speed < 1000   Ahmad Fatoum
• [PATCH] ARM: pbab01: allow USB-OTG port runtime configuration   Ahmad Fatoum
• [PATCH master 0/3] ARM: rpi3: fix misc recent breakage   Ahmad Fatoum
• [PATCH master 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK   Ahmad Fatoum
• [PATCH master 2/3] clk: add BCM2835 auxiliary peripheral clock driver   Ahmad Fatoum
• [PATCH master 3/3] clocksource: assign non-zero priorities to all clocksources   Ahmad Fatoum
• [PATCH master v2 0/3] ARM: rpi3: fix misc recent breakage   Ahmad Fatoum
• [PATCH master v2 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK   Ahmad Fatoum
• [PATCH master v2 2/3] clk: add BCM2835 auxiliary peripheral clock driver   Ahmad Fatoum
• [PATCH master v2 3/3] clocksource: assign non-zero priorities to all clocksources   Ahmad Fatoum
• [PATCH 0/4] ARM: rpi: enable single entry point for all   Ahmad Fatoum
• [PATCH 1/4] ARM: cpu: board-dt-2nd: call arm_cpu_lowlevel_init   Ahmad Fatoum
• [PATCH 2/4] ARM: rpi: don't warn about lack of videocore fdt   Ahmad Fatoum
• [PATCH 3/4] ARM: rpi: remove outdated comment after stack setup rework   Ahmad Fatoum
• [PATCH 4/4] ARM: configs: rpi: add and document single barebox-dt-2nd bootloader   Ahmad Fatoum
• [PATCH master v2 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK   Ahmad Fatoum
• [PATCH master v3 0/3] ARM: rpi3: fix misc recent breakage   Ahmad Fatoum
• [PATCH master v3 1/3] ARM: asm: fix miscompilation of 32-bit ENTRY_FUNCTION_WITHSTACK   Ahmad Fatoum
• [PATCH master v3 2/3] clk: add BCM2835 auxiliary peripheral clock driver   Ahmad Fatoum
• [PATCH master v3 3/3] clocksource: assign non-zero priorities to all clocksources   Ahmad Fatoum
• [PATCH v2 1/2] spi: Port SiFive SPI controller driver   Ahmad Fatoum
• [PATCH v2 2/2] RISC-V: sifive: enable SPI Flash and SD in config   Ahmad Fatoum
• [PATCH] gpiolib: remove declaration of now unused variable   Ahmad Fatoum
• [PATCH] Documentation: remote-control: be explicit about python2 requirement   Ahmad Fatoum
• [PATCH master] mci: stm32_sdmmc2: add STM32MP131 AMBA primecell peripheral ID   Ahmad Fatoum
• [PATCH v1 3/5] of: add generic of_fixup_machine_compatible()   Ahmad Fatoum
• [PATCH v1 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible   Ahmad Fatoum
• [PATCH v2 3/4] of: add generic of_fixup_machine_compatible()   Ahmad Fatoum
• [PATCH v2 3/4] of: add generic of_fixup_machine_compatible()   Ahmad Fatoum
• [PATCH] ata: ide-sff: fix integer overflow in ata_wait_busy()   Sascha Hauer
• [PATCH v1 1/1] ARM: boards: protonic-imx6: fix file system access warning   Sascha Hauer
• [PATCH v3 02/12] net: add of_find_eth_device_by_node() function   Sascha Hauer
• [PATCH v3 03/12] net: add DSA framework to support basic switch functionality   Sascha Hauer
• [PATCH v3 10/12] net: dsa: add support for SJA11xx switches   Sascha Hauer
• [PATCH v3 11/12] net: dsa: add KSZ9477 switch SPI driver   Sascha Hauer
• [PATCH] video: ipuv3: combine two subsequent info prints into one   Sascha Hauer
• [PATCH] ARM: fix GCC 11.x build failures for ARMv7   Sascha Hauer
• [PATCH v4 01/13] net: add RX preprocessor support   Sascha Hauer
• [PATCH v4 04/13] net: add DSA framework to support basic switch functionality   Sascha Hauer
• [PATCH v3 03/12] net: add DSA framework to support basic switch functionality   Sascha Hauer
• [PATCH v4 11/13] net: dsa: add support for SJA11xx switches   Sascha Hauer
• [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver   Sascha Hauer
• [PATCH v4 13/13] add ethlog command   Sascha Hauer
• [PATCH v1 1/2] net: designware: eqos: fix receive issue with external switch   Sascha Hauer
• [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT   Sascha Hauer
• [PATCH] ARM: Rockchip: Update DTS for BPI-R2Pro for new HW-Rev   Sascha Hauer
• [PATCH 1/2] phy: freescale: imx8mq-usb: add support for i.MX8MP PHY   Sascha Hauer
• [PATCH v5 00/14] provide DSA support   Sascha Hauer
• [PATCH] usb: xhci: Honor transfer timeouts   Sascha Hauer
• [PATCH v1] net: phy: do not call adjust_link() form phy_device_attach()   Sascha Hauer
• [PATCH v1] net: phy: add TI DP83TD510E T1L PHY support   Sascha Hauer
• AM335x MLO failed to boot   Sascha Hauer
• [PATCH 1/2] mtd: peb: Add mtd_peb_read_file()   Sascha Hauer
• [PATCH 2/2] ARM: omap: xload: read from unpartitioned device   Sascha Hauer
• AM335x MLO failed to boot   Sascha Hauer
• [PATCH 1/3] ARM: CCMX51: Remove excess assignment   Sascha Hauer
• [PATCH] GPIO: clps711x: Simplify initialization   Sascha Hauer
• [PATCH v2] ARM: pbab01: allow USB-OTG port runtime configuration   Sascha Hauer
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Sascha Hauer
• v2022.04.0   Sascha Hauer
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Sascha Hauer
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Sascha Hauer
• [PATCH v2] arm: boards: Add support for MYIR MYD-AM335X Development Board   Sascha Hauer
• [PATCH] clk: imx8mp: remove SYS PLL 1/2 clock gates   Sascha Hauer
• [PATCH] Documentation: boards: i.MX8MP-EVK: Fix typo   Sascha Hauer
• [PATCH] video: omap-fb: Rework to enable COMPILE_TEST option   Sascha Hauer
• [PATCH] serial: ns16550: Reuse 16550 serial for tegra UART   Sascha Hauer
• [PATCH master v3 0/3] ARM: rpi3: fix misc recent breakage   Sascha Hauer
• [PATCH 0/4] ARM: rpi: enable single entry point for all   Sascha Hauer
• [PATCH v2 1/2] spi: Port SiFive SPI controller driver   Sascha Hauer
• [PATCH] gpiolib: remove declaration of now unused variable   Sascha Hauer
• [PATCH] Documentation: remote-control: be explicit about python2 requirement   Sascha Hauer
• [PATCH v3] arm: boards: Add support for MYIR MYD-AM335X Development Board   Sascha Hauer
• [PATCH] ata: disk_ata_drive: clean up code in ata_dump_id()   Sascha Hauer
• [PATCH master] mci: stm32_sdmmc2: add STM32MP131 AMBA primecell peripheral ID   Sascha Hauer
• [PATCH v1] net: dsa: wait until PHY aneg is done   Sascha Hauer
• [PATCH v3 1/5] common: add $global.serial_number with device tree fixup   Sascha Hauer
• [PATCH v3 3/5] of: add generic of_fixup_machine_compatible()   Sascha Hauer
• [ANNOUNCEMENT] Getting more of Barebox   Jules Maselbas
• Getting more of Barebox   Jules Maselbas
• [PATCH v3 1/5] common: add $global.serial_number with device tree fixup   Jules Maselbas
• [PATCH] ata: disk_ata_drive: clean up code in ata_dump_id()   Denis Orlov
• [PATCH] ARM: pbab01: allow USB-OTG port runtime configuration   Andrej Picej
• [PATCH] ARM: pbab01: allow USB-OTG port runtime configuration   Andrej Picej
• [PATCH v2] ARM: pbab01: allow USB-OTG port runtime configuration   Andrej Picej
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Trent Piepho
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Trent Piepho
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Trent Piepho
• [PATCH v2 00/12] provide DSA support   Oleksij Rempel
• [PATCH v2 01/12] net: add RX preprocessor support   Oleksij Rempel
• [PATCH v2 02/12] net: add of_find_eth_device_by_node() function   Oleksij Rempel
• [PATCH v2 03/12] net: add DSA framework to support basic switch functionality   Oleksij Rempel
• [PATCH v2 04/12] driver: add dev_get_priv() helper   Oleksij Rempel
• [PATCH v2 05/12] net: port part of if_vlan header from kernel v5.17   Oleksij Rempel
• [PATCH v2 06/12] spi: port spi_sync_transfer() function from kernel v5.17   Oleksij Rempel
• [PATCH v2 07/12] net: mdio: add MDIO_DEVAD_NONE define   Oleksij Rempel
• [PATCH v2 08/12] net: phy: make sure MDIO bus is probed if we search for the PHY   Oleksij Rempel
• [PATCH v2 09/12] of_net: add rev-rmii support   Oleksij Rempel
• [PATCH v2 10/12] net: dsa: add support for SJA11xx switches   Oleksij Rempel
• [PATCH v2 11/12] net: dsa: add KSZ9477 switch SPI driver   Oleksij Rempel
• [PATCH v2 12/12] add ethlog   Oleksij Rempel
• [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT   Oleksij Rempel
• [PATCH v1 1/2] net: designware: eqos: fix receive issue with external switch   Oleksij Rempel
• [PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY   Oleksij Rempel
• [PATCH v3 00/12] provide DSA support   Oleksij Rempel
• [PATCH v3 01/12] net: add RX preprocessor support   Oleksij Rempel
• [PATCH v3 02/12] net: add of_find_eth_device_by_node() function   Oleksij Rempel
• [PATCH v3 03/12] net: add DSA framework to support basic switch functionality   Oleksij Rempel
• [PATCH v3 04/12] driver: add dev_get_priv() helper   Oleksij Rempel
• [PATCH v3 05/12] net: port part of if_vlan header from kernel v5.17   Oleksij Rempel
• [PATCH v3 06/12] spi: port spi_sync_transfer() function from kernel v5.17   Oleksij Rempel
• [PATCH v3 07/12] net: mdio: add MDIO_DEVAD_NONE define   Oleksij Rempel
• [PATCH v3 08/12] net: phy: make sure MDIO bus is probed if we search for the PHY   Oleksij Rempel
• [PATCH v3 09/12] of_net: add rev-rmii support   Oleksij Rempel
• [PATCH v3 10/12] net: dsa: add support for SJA11xx switches   Oleksij Rempel
• [PATCH v3 11/12] net: dsa: add KSZ9477 switch SPI driver   Oleksij Rempel
• [PATCH v3 12/12] add ethlog   Oleksij Rempel
• [PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY   Oleksij Rempel
• [PATCH v1] ARM: dts: at91-microchip-ksz9477-evb: start using kernel DT   Oleksij Rempel
• [PATCH v4 00/13] provide DSA support   Oleksij Rempel
• [PATCH v4 01/13] net: add RX preprocessor support   Oleksij Rempel
• [PATCH v4 02/13] net: add of_find_eth_device_by_node() function   Oleksij Rempel
• [PATCH v4 03/13] net: phy: export of_phy_register_fixed_link() function   Oleksij Rempel
• [PATCH v4 04/13] net: add DSA framework to support basic switch functionality   Oleksij Rempel
• [PATCH v4 05/13] driver: add dev_get_priv() helper   Oleksij Rempel
• [PATCH v4 06/13] net: port part of if_vlan header from kernel v5.17   Oleksij Rempel
• [PATCH v4 07/13] spi: port spi_sync_transfer() function from kernel v5.17   Oleksij Rempel
• [PATCH v4 08/13] net: mdio: add MDIO_DEVAD_NONE define   Oleksij Rempel
• [PATCH v4 09/13] net: phy: make sure MDIO bus is probed if we search for the PHY   Oleksij Rempel
• [PATCH v4 10/13] of_net: add rev-rmii support   Oleksij Rempel
• [PATCH v4 11/13] net: dsa: add support for SJA11xx switches   Oleksij Rempel
• [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver   Oleksij Rempel
• [PATCH v4 13/13] add ethlog command   Oleksij Rempel
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Oleksij Rempel
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Oleksij Rempel
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Oleksij Rempel
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Oleksij Rempel
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Oleksij Rempel
• [PATCH v4 01/13] net: add RX preprocessor support   Oleksij Rempel
• [PATCH v5 00/14] provide DSA support   Oleksij Rempel
• [PATCH v5 01/14] net: add RX preprocessor support   Oleksij Rempel
• [PATCH v5 02/14] net: add of_find_eth_device_by_node() function   Oleksij Rempel
• [PATCH v5 03/14] net: phy: export of_phy_register_fixed_link() function   Oleksij Rempel
• [PATCH v5 04/14] net: add DSA framework to support basic switch functionality   Oleksij Rempel
• [PATCH v5 05/14] driver: add dev_get_priv() helper   Oleksij Rempel
• [PATCH v5 06/14] net: port part of if_vlan header from kernel v5.17   Oleksij Rempel
• [PATCH v5 07/14] spi: port spi_sync_transfer() function from kernel v5.17   Oleksij Rempel
• [PATCH v5 08/14] net: mdio: add MDIO_DEVAD_NONE define   Oleksij Rempel
• [PATCH v5 09/14] net: phy: make sure MDIO bus is probed if we search for the PHY   Oleksij Rempel
• [PATCH v5 10/14] of_net: add rev-rmii support   Oleksij Rempel
• [PATCH v5 11/14] net: dsa: add support for SJA11xx switches   Oleksij Rempel
• [PATCH v5 12/14] net: dsa: add KSZ9477 switch SPI driver   Oleksij Rempel
• [PATCH v5 13/14] hexdump: provide support for dev_print_hex_dump()   Oleksij Rempel
• [PATCH v5 14/14] add ethlog command   Oleksij Rempel
• [PATCH v1] net: designware: eqos: fix link speed configuration for speed < 1000   Oleksij Rempel
• [PATCH v1] net: designware: eqos: fix link speed configuration for speed < 1000   Oleksij Rempel
• [PATCH v1] net: phy: do not call adjust_link() form phy_device_attach()   Oleksij Rempel
• [PATCH v1] net: phy: add TI DP83TD510E T1L PHY support   Oleksij Rempel
• [PATCH v1] net: dsa: wait until PHY aneg is done   Oleksij Rempel
• [PATCH v1 1/5] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v1 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number()   Oleksij Rempel
• [PATCH v1 3/5] of: add generic of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v1 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v1 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible   Oleksij Rempel
• [PATCH v2 0/4] add different OF board fixups   Oleksij Rempel
• [PATCH v2 1/4] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v2 2/4] ARM: boards: protonic-imx6: make use of barebox_set_serial_number()   Oleksij Rempel
• [PATCH v2 3/4] of: add generic of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v2 4/4] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v2 3/4] of: add generic of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v3 0/5] add different OF board fixups   Oleksij Rempel
• [PATCH v3 1/5] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v3 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number()   Oleksij Rempel
• [PATCH v3 3/5] of: add generic of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v3 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v3 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible   Oleksij Rempel
• [PATCH v3 1/5] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v4 0/5] add different OF board fixups   Oleksij Rempel
• [PATCH v4 1/5] common: add $global.serial_number with device tree fixup   Oleksij Rempel
• [PATCH v4 2/5] ARM: boards: protonic-imx6: make use of barebox_set_serial_number()   Oleksij Rempel
• [PATCH v4 3/5] of: add generic of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v4 4/5] ARM: boards: skov-imx6: make use of of_fixup_machine_compatible()   Oleksij Rempel
• [PATCH v4 5/5] ARM: boards: protonic-imx6: add HW revision specific machine compatible   Oleksij Rempel
• AM335x MLO failed to boot   Alexander Shiyan
• [PATCH 1/3] ARM: CCMX51: Remove excess assignment   Alexander Shiyan
• [PATCH 2/3] ARM: CCMX51: Add support for low-level debug   Alexander Shiyan
• [PATCH 3/3] ARM: CCMX51: Add support for 16-bit memory module variants   Alexander Shiyan
• AM335x MLO failed to boot   Alexander Shiyan
• [PATCH] GPIO: clps711x: Simplify initialization   Alexander Shiyan
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Alexander Shiyan
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Alexander Shiyan
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Alexander Shiyan
• [PATCH] video: omap-fb: Rework to enable COMPILE_TEST option   Alexander Shiyan
• [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board   Alexander Shiyan
• [PATCH v2] arm: boards: Add support for MYIR MYD-AM335X Development Board   Alexander Shiyan
• [PATCH] serial: ns16550: Reuse 16550 serial for tegra UART   Alexander Shiyan
• [PATCH v3] arm: boards: Add support for MYIR MYD-AM335X Development Board   Alexander Shiyan
• [PATCH 1/2] phy: freescale: imx8mq-usb: add support for i.MX8MP PHY   Lucas Stach
• [PATCH 2/2] usb: dwc3: of-simple: add i.MX8MP compatible   Lucas Stach
• [PATCH] usb: xhci: Honor transfer timeouts   Lucas Stach
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Frank Wunderlich
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Frank Wunderlich
• Aw: Re: change r2pro dts to public hw version (was "Board code with 2 dts" )   Frank Wunderlich
• change r2pro dts to public hw version (was "Board code with 2 dts" )   Frank Wunderlich
• Aw: Re: change r2pro dts to public hw version (was "Board code with 2 dts" )   Frank Wunderlich
• [PATCH] ARM: Rockchip: Update DTS for BPI-R2Pro for new HW-Rev   Frank Wunderlich
• [PATCH v3 1/5] common: add $global.serial_number with device tree fixup   Ulrich Ölmann

Last message date: Fri Apr 29 01:07:26 PDT 2022
Archived on: Fri Apr 29 01:07:32 PDT 2022

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...