[PATCH v1 2/2] net: designware: eqos: do not try to talk to not existing PHY

[Ahmad Fatoum]

Hello Oleksij,

On 07.04.22 11:02, Oleksij Rempel wrote:
> From: Rouven Czerwinski <r.czerwinski at pengutronix.de>
> 
> Currently barebox will try to talk to the phy over mdio, even if the
> parent is a fixed-link. This will result in the following stacktrace:

Is this not covered by Rouven's 6269556397ed ("net: eqos: let phy_resume
handle fixed link phys")?

Cheers,
Ahmad

> 
>   barebox at Linux Automation Test Automation Controller (TAC):/ dhcp
>   unable to handle NULL pointer dereference at address 0x00000130
>   pc : [<dfc01800>]    lr : [<dfc0f963>]
>   sp : dffefd40  ip : 004c4b40  fp : d00286e0
>   r10: cf25cc4e  r9 : 00000000  r8 : 05f5e100
>   r7 : 00000130  r6 : 00000000  r5 : 00000000  r4 : 00000130
>   r3 : 00000109  r2 : 00000000  r1 : 00000000  r0 : 00000130
>   Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
>   WARNING: [<dfc01800>] (slice_acquire+0xc/0x28) from [<dfc0f963>] (mdiobus_read+0x13/0x28)
>   WARNING: [<dfc0f963>] (mdiobus_read+0x13/0x28) from [<dfc10685>] (eqos_start+0x85/0x32c)
>   WARNING: [<dfc10685>] (eqos_start+0x85/0x32c) from [<dfc3cdf1>] (eth_open+0xd/0x24)
>   WARNING: [<dfc3cdf1>] (eth_open+0xd/0x24) from [<dfc3e391>] (dhcp+0xb/0x3a)
>   WARNING: [<dfc3e391>] (dhcp+0xb/0x3a) from [<dfc30fab>] (do_dhcp+0xfb/0x114)
>   WARNING: [<dfc30fab>] (do_dhcp+0xfb/0x114) from [<dfc0490f>] (execute_command+0x23/0x4c)
>   WARNING: [<dfc0490f>] (execute_command+0x23/0x4c) from [<dfc0a127>] (run_list_real+0x5bf/0x638)
>   WARNING: [<dfc0a127>] (run_list_real+0x5bf/0x638) from [<dfc09a2b>] (parse_stream_outer+0xc7/0x154)
>   WARNING: [<dfc09a2b>] (parse_stream_outer+0xc7/0x154) from [<dfc0a383>] (run_shell+0x3f/0x6c)
>   WARNING: [<dfc0a383>] (run_shell+0x3f/0x6c) from [<dfc010b9>] (run_init+0x191/0x200)
>   WARNING: [<dfc010b9>] (run_init+0x191/0x200) from [<dfc01153>] (start_barebox+0x2b/0x6c)
>   WARNING: [<dfc01153>] (start_barebox+0x2b/0x6c) from [<dfc4be6d>] (barebox_non_pbl_start+0x121/0x164)
>   WARNING: [<dfc4be6d>] (barebox_non_pbl_start+0x121/0x164) from [<dfc00005>] (__bare_init_start+0x1/0xc)
> 
>   WARNING: [<dfc4da7d>] (unwind_backtrace+0x1/0x78) from [<dfc01461>] (panic+0x1d/0x34)
>   WARNING: [<dfc01461>] (panic+0x1d/0x34) from [<dfc4b6a3>] (do_exception+0xf/0x14)
>   WARNING: [<dfc4b6a3>] (do_exception+0xf/0x14) from [<dfc4b711>] (do_data_abort+0x21/0x34)
>   WARNING: [<dfc4b711>] (do_data_abort+0x21/0x34) from [<dfc4b454>] (do_abort_6+0x48/0x54)
> 
> Signed-off-by: Rouven Czerwinski <r.czerwinski at pengutronix.de>
> Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> ---
>  drivers/net/designware_eqos.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
> index 1f97d84880..6b372e4274 100644
> --- a/drivers/net/designware_eqos.c
> +++ b/drivers/net/designware_eqos.c
> @@ -417,9 +417,11 @@ static int eqos_start(struct eth_device *edev)
>  	/* Before we reset the mac, we must insure the PHY is not powered down
>  	 * as the dw controller needs all clock domains to be running, including
>  	 * the PHY clock, to come out of a mac reset.  */
> -	ret = phy_resume(edev->phydev);
> -	if (ret)
> -		return ret;
> +	if (edev->phydev) {
> +		ret = phy_resume(edev->phydev);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	/* Configure MTL */
>  


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |